STUDY ON THE INFLUENCE MECHANISM OF INTERFACE PHASE AND PORE DEFECTS ON THE TENSILE PROPERTIES OF PLAIN WOVEN COMPOSITE MATERIALS

Chen Yongan; Song Shizhe; Yang Yang; Li Chenggang; Chen Guodong; Zeng Jin

doi:10.6052/0459-1879-24-505

Volume 57 Issue 5

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Theoretical and Applied Mechanics > 2025 > 57(5): 1131-1142. > DOI: 10.6052/0459-1879-24-505 CSTR: 32045.14.0459-1879-24-505

Chen Yongan, Song Shizhe, Yang Yang, Li Chenggang, Chen Guodong, Zeng Jin. Study on the influence mechanism of interface phase and pore defects on the tensile properties of plain woven composite materials. Chinese Journal of Theoretical and Applied Mechanics, 2025, 57(5): 1131-1142. DOI: 10.6052/0459-1879-24-505

Citation:

PDF (3564 KB)

STUDY ON THE INFLUENCE MECHANISM OF INTERFACE PHASE AND PORE DEFECTS ON THE TENSILE PROPERTIES OF PLAIN WOVEN COMPOSITE MATERIALS

*.
School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu 610031, China
†.
Taihang Laboratory, Chengdu 610299, China

Received Date: November 04, 2024
Accepted Date: April 17, 2025
Available Online: April 17, 2025
Published Date: April 18, 2025

Graphical Abstract

Abstract

Abstract

In the densification process of plain weave fabric composite materials, pore defects occur due to imperfect matrix deposition, and interfaces play a role in transmitting loads in plain weave fabric composite materials. Therefore, it is important to establish a damage constitutive model that considers the interface phase and pore defects to describe the mechanical behavior of the material under the influence of interface phase and pore defects, for the design of material structure damage tolerance and selection of interface phase materials. Taking a certain plain weave composite material as the research object, a zero-thickness cohesive damage model and random distributed pore defects were introduced based on the Hashin and maximum stress damage criterion, simulating the microscopic damage initiation and evolution process, and studying the influence mechanism of the plain weave composite material's tensile performance. The study revealed that the incorporation of an interface phase would significantly change the damage distribution of the composite material. When the plain weave composite materials are subjected to force, the interface phases induce cracks to occur at the edge of the model in the direction of the external load, preventing the cracks from directly extending through the fibers, thus changing the damage pattern from being mainly at the fiber bundle lap joints under radial tensile load to being mainly at the unit cell edges; when the porosity rate surpasses a specific range, it will lead to a significant alteration in the damage mode of the composites, and as the porosity rate increased, the material would change from being supported by the fiber bundle, matrix, and interface phase to being supported mainly by the fiber bundle, greatly weakening the material's strength performance. This research outcome provides certain reference basis for the prediction of the strength performance of other composites as well as the study on the influencing mechanism of tensile performance.
- composite material,
- progressive damage,
- interface damage,
- strength performance,
- pore defects

FullText(HTML)

References (38)

References

[1]	王涛. 基于多尺度方法的平纹机织复合材料低速冲击损伤研究. [硕士论文]. 郑州: 郑州大学, 2021 (Wang Tao. Research on low-velocity impact damage of plain woven composites based on multi-scale method. [Master Thesis]. Zhengzhou: Zhengzhou University, 2021 (in Chinese) Wang Tao. Research on low-velocity impact damage of plain woven composites based on multi-scale method. [Master Thesis]. Zhengzhou: Zhengzhou University, 2021 (in Chinese)
[2]	杨景锋, 王齐华, 杨丽君等. 纤维增强聚合物基复合材料的界面性能. 高分子材料科学与工程, 2005, 21(3): 6-10 (Yang Jingfeng, Wang Qihua, Yang Lijun, et al. Interface properties of fiber-reinforced polymer composites. Polymer Materials Science and Engineering, 2005, 21(3): 6-10 (in Chinese) doi: 10.3321/j.issn:1000-7555.2005.03.002 Yang Jingfeng, Wang Qihua, Yang Lijun, et al. Interface properties of fiber-reinforced polymer composites. Polymer Materials Science and Engineering, 2005, 21(3): 6-10 (in Chinese) doi: 10.3321/j.issn:1000-7555.2005.03.002
[3]	郭晓龙, 姚寅, 陈少华. 一种预测颗粒增强复合材料界面力学性能的新方法. 力学学报, 2021, 53(5): 1334-1344 (Guo Xiaolong, Yao Yin, Chen Shaohua. A new method for predicting the interfacial mechanical property in particle-reinforced composites. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(5): 1334-1344 (in Chinese) doi: 10.6052/0459-1879-21-076 Guo Xiaolong, Yao Yin, Chen Shaohua. A new method for predicting the interfacial mechanical property in particle-reinforced composites. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(5): 1334-1344 (in Chinese) doi: 10.6052/0459-1879-21-076
[4]	牛序铭. 偏轴载荷下单向陶瓷基复合材料拉伸行为数值模拟及应用. [博士论文]. 南京: 南京航空航天大学, 2020 (Niu Xuming. Numerical simulation of tensile behavior of unidirectional ceramic matrix composite under off-axial loading and its application. [PhD Thesis]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2020 (in Chinese) Niu Xuming. Numerical simulation of tensile behavior of unidirectional ceramic matrix composite under off-axial loading and its application. [PhD Thesis]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2020 (in Chinese)
[5]	王奇志, 林慧星, 许赟泉. 二维编织陶瓷基复合材料偏轴拉伸力学性能预测. 复合材料学报, 2018, 35(12): 3423-3432 (Wang Qizhi, Lin Huixing, Xu Yunquan. Mechanical properties prediction of 2Dbraided ceramic matrix composites under off-axial tension. Acta Materiae Compositae Sinica, 2018, 35(12): 3423-3432 (in Chinese) Wang Qizhi, Lin Huixing, Xu Yunquan. Mechanical properties prediction of 2Dbraided ceramic matrix composites under off-axial tension. Acta Materiae Compositae Sinica, 2018, 35(12): 3423-3432 (in Chinese)
[6]	刘文台, 程坤, 周何乐子等. 针刺C/C复合材料面内拉伸强度预测. 复合材料学报, 2023, 40(2): 1142-1153 (Liu Wentai, Cheng Kun, Zhou Helezi, et al. Prediction of in-plane tensile strength of needle punched C/C composites. Acta Materiae Compositae Sinica, 2023, 40(2): 1142-1153 (in Chinese) Liu Wentai, Cheng Kun, Zhou Helezi, et al. Prediction of in-plane tensile strength of needle punched C/C composites. Acta Materiae Compositae Sinica, 2023, 40(2): 1142-1153 (in Chinese)
[7]	Xia T, Qian YX, Xu SY, et al. An incremental elastic-plastic cohesive constitutive model with considering damage. Science China Technological Sciences, 2023, 66(12): 3651-3662 doi: 10.1007/s11431-022-2314-3
[8]	管皞阳, 张立, 荆开开等. 国产三代2.5D SiC_f/SiC复合材料的界面力学性能. 无机材料学报, 2024, 39(3): 259-267 (Guan Haoyang, Zhang Li, Jing Kaikai, et al. Interface mechanical properties of the domestic 3rd generation 2.5D SiC_f/SiC composite. Journal of Inorganic Materials, 2024, 39(3): 259-267 (in Chinese) doi: 10.15541/jim20230352 Guan Haoyang, Zhang Li, Jing Kaikai, et al. Interface mechanical properties of the domestic 3rd generation 2.5D SiC_f/SiC composite. Journal of Inorganic Materials, 2024, 39(3): 259-267 (in Chinese) doi: 10.15541/jim20230352
[9]	田学亮, 徐颖, 王学民等. 基于三维随机细观模型的SiC_p/Al复合材料力学性能分析. 航空动力学报, 2024, 39(6): 67-79 (Tian Xueliang, Xu Ying, Wang Xuemin, et al. Analysis of mechanical properties of SiC_p/Al composites based on three-dimensional random meso-model. Journal of Aerospace Power, 2024, 39(6): 67-79 (in Chinese) Tian Xueliang, Xu Ying, Wang Xuemin, et al. Analysis of mechanical properties of SiC_p/Al composites based on three-dimensional random meso-model. Journal of Aerospace Power, 2024, 39(6): 67-79 (in Chinese)
[10]	Wang H, Zhong XY, Jia H, et al. Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties. Composite Structures, 2024, 339: 118081 doi: 10.1016/j.compstruct.2024.118081
[11]	杨志贤, 张明, 李昂等. 含孔隙缺陷三维五向编织复合材料偏轴拉伸力学性能分析. 北京航空航天大学学报, 2022, 48(4): 569-577 (Yang Zhixian, Zhang Ming, Li Ang, et al. Off-axis tensile mechanical properties of 3D five-directional braided composites with void defects. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(4): 569-577 (in Chinese) Yang Zhixian, Zhang Ming, Li Ang, et al. Off-axis tensile mechanical properties of 3D five-directional braided composites with void defects. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(4): 569-577 (in Chinese)
[12]	龚建瑾. 含孔隙缺陷三维编织复合材料力学性能分析的多尺度方法研究. [硕士论文]. 哈尔滨: 哈尔滨工业大学, 2023 (Gong Jianjin. Investigation of multiscale method of mechanical properties analysis of 3D braided composites with pore defects. [Master Thesis]. Harbin: Harbin Institute of Technology, 2023 (in Chinese) Gong Jianjin. Investigation of multiscale method of mechanical properties analysis of 3D braided composites with pore defects. [Master Thesis]. Harbin: Harbin Institute of Technology, 2023 (in Chinese)
[13]	张国辉, 魏雄, 杨振东等. 细观初始孔隙缺陷对混凝土力学性能的影响. 建筑材料学报, 2024, 27(5): 425-431 (Zhang Guohui, Wei Xiong, Yang Zhendong, et al. Influence of Mesoscopic initial pore defects on mechanical properties of concrete. Journal of Building Materials, 2024, 27(5): 425-431 (in Chinese) doi: 10.3969/j.issn.1007-9629.2024.05.006 Zhang Guohui, Wei Xiong, Yang Zhendong, et al. Influence of Mesoscopic initial pore defects on mechanical properties of concrete. Journal of Building Materials, 2024, 27(5): 425-431 (in Chinese) doi: 10.3969/j.issn.1007-9629.2024.05.006
[14]	Li YH, Ma Y, Guan TH, et al. A meso-scale stochastic model for tensile behavior of 2D woven ceramic composites considering void defects and stacking mode. Composites Part A: Applied Science and Manufacturing, 2024, 176: 107838 doi: 10.1016/j.compositesa.2023.107838
[15]	李步炜, 尧军平, 陈国鑫等. 孔隙率对SiC_p/AZ91D复合材料力学行为及其失效机理的影响研究. 材料工程, 2024, http://kns.cnki.net/kcms/detail/11.1800.TB.20240422.1730.005.html" target="_blank"> http://kns.cnki.net/kcms/detail/11.1800.TB.20240422.1730.005.html (Li Buwei, Yao Junping, Chen Guoxin, et al. Effect of porosity on mechanical behavior and failure mechanism of SiC_p/AZ91D composite materials. Journal of Materials Engineering, 2024, http://kns.cnki.net/kcms/detail/11.1800.TB.20240422.1730.005.html" target="_blank"> http://kns.cnki.net/kcms/detail/11.1800.TB.20240422.1730.005.html (in Chinese) Li Buwei, Yao Junping, Chen Guoxin, et al. Effect of porosity on mechanical behavior and failure mechanism of SiC_p/AZ91D composite materials. Journal of Materials Engineering, 2024, http://kns.cnki.net/kcms/detail/11.1800.TB.20240422.1730.005.html (in Chinese)
[16]	蒋丽娟, 侯振华, 周寅智. 预制体结构及界面对三维SiC/SiC复合材料拉伸性能的影响. 复合材料学报, 2020, 37(3): 642-649 (Jiang Lijuan, Hou Zhenhua, Zhou Yinzhi. Effects of preform structure and interface types on tensile properties of 3D-SiC/SiC composites. Acta Materiae Compositae Sinica, 2020, 37(3): 642-649 (in Chinese) Jiang Lijuan, Hou Zhenhua, Zhou Yinzhi. Effects of preform structure and interface types on tensile properties of 3D-SiC/SiC composites. Acta Materiae Compositae Sinica, 2020, 37(3): 642-649 (in Chinese)
[17]	薛建刚, 高希光, 方光武等. 针刺陶瓷基复合材料损伤本构模型及构件应力分析. 航空动力学报, 2016, 31(10): 2370-2375 (Xue Jiangang, Gao Xiguang, Fang Guangwu, et al. A damage constitutive model for needled CMCs composites and stress analysis of components. Journal of Aerospace Power, 2016, 31(10): 2370-2375 (in Chinese) Xue Jiangang, Gao Xiguang, Fang Guangwu, et al. A damage constitutive model for needled CMCs composites and stress analysis of components. Journal of Aerospace Power, 2016, 31(10): 2370-2375 (in Chinese)
[18]	齐泽文, 胡殿印, 张龙等. 含孔隙三维四向编织复合材料力学性能的双尺度分析. 推进技术, 2018, 39(8): 1873-1879 (Qi Zewen, Hu Dianyin, Zhang Long, et al. Two-scale analysis for mechanical properties of 3D four-directional braided composites with pore defects. Journal of Propulsion Technology, 2018, 39(8): 1873-1879 (in Chinese) Qi Zewen, Hu Dianyin, Zhang Long, et al. Two-scale analysis for mechanical properties of 3D four-directional braided composites with pore defects. Journal of Propulsion Technology, 2018, 39(8): 1873-1879 (in Chinese)
[19]	张怀, 李成, 刘乐等. 基于改进三胞模型考虑孔隙缺陷的三维四向编织复合材料多尺度力学性能分析. 复合材料科学与工程, 2023, 2: 14-23 (Zhang Huai, Li Cheng, Liu Le, et al. Multi-scale mechanical properties analysis of three-dimensional four-direction braided composites considering pore defects based on improved three-cell model. Composite Science and Engineering, 2023, 2: 14-23 (in Chinese) Zhang Huai, Li Cheng, Liu Le, et al. Multi-scale mechanical properties analysis of three-dimensional four-direction braided composites considering pore defects based on improved three-cell model. Composite Science and Engineering, 2023, 2: 14-23 (in Chinese)
[20]	Zhang JY, Xie J, Zhao XZ, et al. Influence of void defects on impact properties of CFRP laminates based on multi-scale simulation method. International Journal of Impact Engineering, 2023, 180: 104706 doi: 10.1016/j.ijimpeng.2023.104706
[21]	Hashin Z. Failure criteria for unidirectional fiber composites. Appl Mech, 1980, 47(2): 329-334 doi: 10.1115/1.3153664
[22]	Hou JP, Petrinic N, Ruiz C, et al. Prediction of impact damage in composite plates. Composites Science and Technology, 2000, 60(2): 273-281 doi: 10.1016/S0266-3538(99)00126-8
[23]	Xia ZH, Zhang YF, Fernand E. A unified periodical boundary conditions for representative volume elements of composites and applications. International Journal of Solids and Structures, 2003, 40(8): 1907-1921 doi: 10.1016/S0020-7683(03)00024-6
[24]	Fang GD, Liang J, Wang BL. Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension. Composite Structures, 2009, 89(1): 126-133 doi: 10.1016/j.compstruct.2008.07.016
[25]	Lin H, Brown LP, Long AC. Modelling and simulating textile structures using TexGen. International Conference on Textile Engineering and Materials, 2011, 331: 44-47
[26]	张力, 王猛, 陈强等. 考虑微观界面的2D编织SiC/SiC复合材料宏-细-微多尺度渐进损伤失效分析. 工程力学, 2022, 39(3): 233-248 (Zhang Li, Wang Meng, Chen Qiang, et al. Macro-meso-micro multiscale analysis for progressive damage failure of 2D braided SiC/SiC composites considering microscake interfaces. Engineering Mechanics, 2022, 39(3): 233-248 (in Chinese) doi: 10.6052/j.issn.1000-4750.2021.01.0050 Zhang Li, Wang Meng, Chen Qiang, et al. Macro-meso-micro multiscale analysis for progressive damage failure of 2D braided SiC/SiC composites considering microscake interfaces. Engineering Mechanics, 2022, 39(3): 233-248 (in Chinese) doi: 10.6052/j.issn.1000-4750.2021.01.0050
[27]	潘清, 李向前. 考虑界面层影响的三维机织复合材料单胞模型研究. 纤维复合材料, 2018, 35(2): 14-19 (Pan Qing, Li Xiangqian. Research on the unit cell model with interface for 3D woven composites. Fiber Composites, 2018, 35(2): 14-19 (in Chinese) doi: 10.3969/j.issn.1003-6423.2018.02.003 Pan Qing, Li Xiangqian. Research on the unit cell model with interface for 3D woven composites. Fiber Composites, 2018, 35(2): 14-19 (in Chinese) doi: 10.3969/j.issn.1003-6423.2018.02.003
[28]	肖潇, 岳涛, 张铁山. 基于内聚力模型的材料类型对胶接接头力学性能的影响. 复合材料科学与工程, 2023(12): 28-37 (Xiao Xiao, Yue Tao, Zhang Tieshan. Effect of material type on mechanical properties of bonded joint based on cohesive model. Composites Science and Engineering, 2023(12): 28-37 (in Chinese) Xiao Xiao, Yue Tao, Zhang Tieshan. Effect of material type on mechanical properties of bonded joint based on cohesive model. Composites Science and Engineering, 2023(12): 28-37 (in Chinese)
[29]	Zhao LB, Gong Y, Zhang JY, et al. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements. Composite Structures, 2014, 116(1): 509-522
[30]	Ye Q, Chen PH. Prediction of the cohesive strength for numerically simulating composite delamination via CZM-based FEM. Composites Part B: Engineering, 2011, 42(5): 1076-1083 82
[31]	纪怀旺, 李增亮. 基于内聚力模型的纤维复合材料细观损伤模拟. 计算机仿真, 2023, 40(2): 309-313 (Ji Huaiwang, Li Zengliang. Simulation of microscopic damage of fiber composite material based on cohesive zone model. Computer Simulation, 2023, 40(2): 309-313 (in Chinese) doi: 10.3969/j.issn.1006-9348.2023.02.057 Ji Huaiwang, Li Zengliang. Simulation of microscopic damage of fiber composite material based on cohesive zone model. Computer Simulation, 2023, 40(2): 309-313 (in Chinese) doi: 10.3969/j.issn.1006-9348.2023.02.057
[32]	刘文台. 针刺碳纤维复合材料力学性能仿真. [硕士论文]. 武汉: 华中科技大学, 2023 (Liu Wentai. Simulation of mechanical properties of needle punched carbon fiber composites. [Master Thesis]. Wuhan: Huazhong University of Science and Technology, 2023 (in Chinese) Liu Wentai. Simulation of mechanical properties of needle punched carbon fiber composites. [Master Thesis]. Wuhan: Huazhong University of Science and Technology, 2023 (in Chinese)
[33]	Chateau C, Gelebart L, Bornert M, et al. Micromechanical modeling of the elastic behavior of unidirectional CVI SiC/SiC composites. International Journal of Solids and Structures, 2015, 58: 322-34 doi: 10.1016/j.ijsolstr.2014.11.020
[34]	Tal D, Fish J. Generating a statistically equivalent representative volume element with discrete defects. Composite Structures, 2016, 153: 791-803 doi: 10.1016/j.compstruct.2016.06.077
[35]	Wei KL, Shi HB, Li J, et al. Progressive damage simulation and tensile strength prediction of three-dimensional braided C/C composites considering void defects. Journal of Solid Rocket Technology, 2020, 43(4): 447-457
[36]	李波, 赵美英, 万小朋. 不规则孔隙对复合材料横向拉伸力学性能的影响. 复合材料学报, 2019, 36(2): 356-361 (Li Bo, Zhao Meiying, Wan Xiaopeng. Influence of irregular-void on transverse tensile mechanical properties of composites. Acta Materiae Compositae Sinica, 2019, 36(2): 356-361 (in Chinese) Li Bo, Zhao Meiying, Wan Xiaopeng. Influence of irregular-void on transverse tensile mechanical properties of composites. Acta Materiae Compositae Sinica, 2019, 36(2): 356-361 (in Chinese)
[37]	张怀. 三维四向编织复合材料多尺度力学性能及损伤分析. [硕士论文]. 郑州: 郑州大学, 2022 (Zhang Huai. Multi-scale mechanical properties and damage analysis of 3D four-directional braided composites. [Master Thesis]. Zhengzhou: Zhengzhou University, 2022 (in Chinese) Zhang Huai. Multi-scale mechanical properties and damage analysis of 3D four-directional braided composites. [Master Thesis]. Zhengzhou: Zhengzhou University, 2022 (in Chinese)
[38]	杨金华, 吕晓旭, 焦健. 碳化硅陶瓷基复合材料界面层技术研究进展. 航空制造技术, 2018, 61(11): 79-87 (Yang Jinhua, Lv Xiaoxu, Jiao Jian. Progress in interphase technology of silicon carbide matrix composites. Aeronautical Manufacturing Technology, 2018, 61(11): 79-87 (in Chinese) Yang Jinhua, Lv Xiaoxu, Jiao Jian. Progress in interphase technology of silicon carbide matrix composites. Aeronautical Manufacturing Technology, 2018, 61(11): 79-87 (in Chinese)

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (40) PDF downloads (18)

STUDY ON THE INFLUENCE MECHANISM OF INTERFACE PHASE AND PORE DEFECTS ON THE TENSILE PROPERTIES OF PLAIN WOVEN COMPOSITE MATERIALS

Abstract

References

Catalog

Article Metrics

Related

Download Center

Author Center

STUDY ON THE INFLUENCE MECHANISM OF INTERFACE PHASE AND PORE DEFECTS ON THE TENSILE PROPERTIES OF PLAIN WOVEN COMPOSITE MATERIALS

Abstract

References

Catalog

Article Metrics

Related

Download Center

Author Center

Export File

Citation

Format

Content