Citation: | Fu Junjian, Peng Tiechuan, Li Ran, Li Shuaihu, Zhou Xiangman, Li Xiang. Structural elastography method considering the coupling effect of stiffness and mass. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(9): 1971-1982. DOI: 10.6052/0459-1879-23-220 |
[1] |
Ophir J, Céspedes I, Ponnekanti H, et al. Elastography: A quantitative method for imaging the elasticity of biological tissues. Ultrasonic Imaging, 1991, 13(2): 111-134 doi: 10.1177/016173469101300201
|
[2] |
Karalilova R, Doykova K, Batalov Z, et al. Spleen elastography in patients with systemic sclerosis. Rheumatology International, 2021, 41(3): 633-641 doi: 10.1007/s00296-020-04772-5
|
[3] |
陈金龙, 潘航, 林祥龙等. 原位测量软材料弹性模量的光学相干弹性成像方法研究. 天津大学学报(自然科学与工程技术版), 2023, 56(2): 111-118 (Chen Jinlong, Pan Hang, Ling Xianglong, et al. Optical coherence elastography for the in situ measurement of the elastic modulus of soft materials. Journal of Tianjin University (Science and Technology), 2023, 56(2): 111-118 (in Chinese)
Chen Jinlong, Pan Hang, Ling Xianglong, et al. Optical coherence elastography for the in situ measurement of the elastic modulus of soft materials. Journal of Tianjin University(Science and Technology), 2023, 56(2): 111-118(in Chinese))
|
[4] |
张鹏辉, 赵扬, 李鹏等. 超声成像检测技术研究进展综述. 激光与光电子学进展, 2022, 59(2): 1-15 (Zhang Penghui, Zhao Yang, Li Peng, et al. Research progress in ultrasonic imaging detection technology. Laser &Optoelectronics Progress, 2022, 59(2): 1-15 (in Chinese)
Zhang Penghui, Zhao Yang, Li Peng, et al. Research progress in ultrasonic imaging detection technology. Laser & Optoelectronics Progress, 2022, 59(2): 1-15(in Chinese))
|
[5] |
傅健, 张昌盛, 朱国港等. X射线分层层析成像技术及在航空航天领域的应用. 航空制造技术, 2019, 62(14): 49-54 (Fu Jian, Zhang Changsheng, Zhu Guogang, et al. Development and application of x-ray computed laminography for aerospace. Aeronautical Manufacturing Technology, 2019, 62(14): 49-54 (in Chinese)
Fu jian, Zhang Changsheng, Zhu Guogang, et al. Development and application of x-ray computed laminography for aerospace. Aeronautical Manufacturing Technology, 2019, 62(14): 49-54(in Chinese))
|
[6] |
翁顺, 朱宏平. 基于有限元模型修正的土木结构损伤识别方法. 工程力学, 2021, 38(3): 1-16 (Weng Shun, Zhu Hongping. Damage identification of civil structures based on finite element model updating. Engineering Mechanics, 2021, 38(3): 1-16 (in Chinese) doi: 10.6052/j.issn.1000-4750.2020.06.ST02
Weng Shun, Zhu Hongping. Damage identification of civil structures based on finite element model updating. Engineering Mechanics, 2021, 38(3): 1-16(in Chinese)) doi: 10.6052/j.issn.1000-4750.2020.06.ST02
|
[7] |
Minh H, Sang-To T, Wahab MA, et al. Structural damage identification in thin-shell structures using a new technique combining finite element model updating and improved cuckoo search algorithm. Advances in Engineering Software, 2022, 173: 103206 doi: 10.1016/j.advengsoft.2022.103206
|
[8] |
Singh T, Sehgal S, Prakash C, et al. Real-time structural health monitoring and damage identification using frequency response functions along with finite element model updating technique. Sensors, 2022, 22(12): 4546 doi: 10.3390/s22124546
|
[9] |
Simoen E, De Roeck G, Lombaert G. Dealing with uncertainty in model updating for damage assessment: a review. Mechanical Systems and Signal Processing, 2015, 56-57: 123-149 doi: 10.1016/j.ymssp.2014.11.001
|
[10] |
Sigmund O, Maute K. Topology optimization approaches: a comparative review. Structural and Multidisciplinary Optimization, 2013, 48(6): 1031-1055 doi: 10.1007/s00158-013-0978-6
|
[11] |
Zhang WH, Zhang ZD, Zhu JH, et al. Structural topology optimization: extensibility and attainability. Science China: Technological Sciences, 2014, 57(7): 1310-1321 doi: 10.1007/s11431-014-5580-7
|
[12] |
Ibhadode O, Zhang ZD, Sixt J, et al. Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook. Virtual and Physical Prototyping, 2023, 18(1): e2181192 doi: 10.1080/17452759.2023.2181192
|
[13] |
Wang MY, Wang XM, Guo DM. A level set method for structural topology optimization. Computer Methods in Applied Mechanics and Engineering, 2003, 192(1-2): 227-246 doi: 10.1016/S0045-7825(02)00559-5
|
[14] |
Wang YG, Yang HD, Kang Z. Velocity field level set method incorporating topological derivatives for topology optimization. Journal of Applied Mechanics, 2022, 89(6): 061002 doi: 10.1115/1.4053989
|
[15] |
Guo X, Zhang WS, Zhong WL. Doing topology optimization explicitly and geometrically—a new moving morphable components based framework. Journal of Applied Mechanics, 2014, 81(8): 081009 doi: 10.1115/1.4027609
|
[16] |
李佳霖, 赵剑, 孙直等. 基于移动可变形组件法(MMC)的运载火箭传力机架结构的轻量化设计. 力学学报, 2022, 54(1): 244-251 (Li Jialin, Zhao Jian, Sun Zhi, et al. Lightweight design of transmission frame structures for launch vehicles based on moving morphable components (MMC) approach. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(1): 244-251 (in Chinese)
Li Jialin, Zhao jian, Sun Zhi, et al. Lightweight design of transmission frame structures for launch vehicles based on moving morphable components (MMC) approach. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(1): 244-251(in Chinese))
|
[17] |
Sigmund O. A 99 line topology optimization code written in matlab. Structural and Multidisciplinary Optimization, 2001, 21(2): 120-127 doi: 10.1007/s001580050176
|
[18] |
Zhang LX, Yang G, Hu D, et al. An approach based on level set method for void identification of continuum structure with time-domain dynamic response. Applied Mathematical Modelling, 2019, 75(3): 446-480
|
[19] |
Mei Y, Du ZL, Zhao DM, et al. Moving morphable inclusion approach: an explicit framework to solve inverse problem in elasticity. Journal of Applied Mechanics, 2021, 88(4): 041001 doi: 10.1115/1.4049142
|
[20] |
Damghani F, Tavakkoli SM. Structural damage detection in plane stress problems by using time domain responses and topology optimization. International Journal of Optimization in Civil Engineering, 2023, 13(2): 257-274
|
[21] |
Zhang LX, Yang G, Hu D. Identification of voids in structures based on level set method and fem. International Journal of Computational Methods, 2018, 15(1): 1850015
|
[22] |
Zhang WS, Du ZL, Sun G, et al. A level set approach for damage identification of continuum structures based on dynamic responses. Journal of Sound and Vibration, 2017, 386: 100-115 doi: 10.1016/j.jsv.2016.06.014
|
[23] |
江守燕, 赵林鑫, 杜成斌. 基于频率和模态保证准则的结构内部多缺陷反演. 力学学报, 2019, 51(4): 1091-1100 (Jiang Shouyan, Zhao Linxin, Du Chengbin. Identification of multiple flaws in structures based on frequency and modal assurance criteria. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1091-1100 (in Chinese)
Jiang Shouyan, Zhao Linxin, Du Chengbin. Identification of multiple flaws in structures based on frequency and modal assurance criteria. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1091-1100(in Chinese))
|
[24] |
Lee JS, Kim JE, Kim YY. Damage detection by the topology design formulation using modal parameters. International Journal for Numerical Methods in Engineering, 2007, 69(7): 1480-1498 doi: 10.1002/nme.1817
|
[25] |
Abdollahi F, Tavakkoli SM. Damage identification by using modal expansion and topology optimization in three dimensional elasticity problems. International Journal of Optimization in Civil Engineering, 2019, 9(4): 543-560
|
[26] |
Saito A, Sugai R, Wang ZX, et al. Damage identification using noisy frequency response functions based on topology optimization. Journal of Sound and Vibration, 2023, 545: 117412 doi: 10.1016/j.jsv.2022.117412
|
[27] |
付君健, 李帅虎, 李好等. 基于拓扑优化的结构弹性成像方法. 力学学报, 2022, 54(5): 1331-1340 (Fu Junjian, Li Shuaihu, Li Hao, et al. Structural elastography method based on topology optimization. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(5): 1331-1340 (in Chinese)
Fu Junjian, Li Shuaihu, Li Hao, et al. Structural elastography method based on topology optimization. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(5): 1331-1340(in Chinese))
|
[28] |
Kim G, Sterkenburg R, Tsutsui W. Investigating the effects of fluid intrusion on nomex® honeycomb sandwich structures with carbon fiber facesheets. Composite Structures, 2018, 206: 535-549 doi: 10.1016/j.compstruct.2018.08.054
|
[29] |
Song ZH, Luong S, Whisler D, et al. Honeycomb core failure mechanism of CFRP/nomex sandwich panel under multi-angle impact of hail ice. International Journal of Impact Engineering, 2021, 150: 103817 doi: 10.1016/j.ijimpeng.2021.103817
|
[30] |
Abrate S. Soft impacts on aerospace structures. Progress in Aerospace Sciences, 2016, 81: 1-17 doi: 10.1016/j.paerosci.2015.11.005
|
[31] |
Siddique SH, Hazell PJ, Wang HX, et al. Lessons from nature: 3 d printed bio-inspired porous structures for impact energy absorption—a review. Additive Manufacturing, 2022, 58: 103051 doi: 10.1016/j.addma.2022.103051
|
[32] |
Fu JJ, Sun PF, Du YX, et al. Design and mechanical characterization of an s-based TPMS hollow isotropic cellular structure. Computer Modeling in Engineering & Sciences, 2022, 131(2): 695-713
|
[33] |
Bendsøe MP, Sigmund O. Material interpolation schemes in topology optimization. Archive of Applied Mechanics, 1999, 69(9): 635-654
|
[34] |
胡骏, 亢战. 考虑可控性的压电作动器拓扑优化设计. 力学学报, 2019, 51(4): 1073-1081 (Hu Jun, Kang Zhan. Topology optimization of piezoelectric actuator considering controllability. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1073-1081 (in Chinese)
Hu Jun, Kang Zhan. Topology optimization of piezoelectric actuator considering controllability. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1073-1081(in Chinese))
|
[35] |
Fan W, Qiao PZ. Vibration-based damage identification methods: a review and comparative study. Structural Health Monitoring, 2011, 10(1): 83-111 doi: 10.1177/1475921710365419
|
[36] |
付君健, 张跃, 杜义贤等. 周期性多孔结构特征值拓扑优化. 振动与冲击, 2022, 41(3): 73-81 (Fu Junjian, Zhang Yue, Du Yixian, et al. Eigenvalue topology optimization of periodic cellular structures. Journal of Vibration and Shock, 2022, 41(3): 73-81 (in Chinese)
Fu Junjian, Zhang Yue, Du Yixian, et al. Eigenvalue topology optimization of periodic cellular structures. Journal of Vibration and Shock, 2022, 41(3): 73-81(in Chinese))
|
[1] | Fu Junjian, Li Shuaihu, Li Hao, Gao Liang, Zhou Xiangman, Tian Qihua. STRUCTURAL ELASTOGRAPHY METHOD BASED ON TOPOLOGY OPTIMIZATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(5): 1331-1340. DOI: 10.6052/0459-1879-21-672 |
[2] | Han Fei, Duan Zunyi. RESEARCH ON DYNAMIC RESPONSE ANALYSIS AND CABLE FORCE IDENTIFICATION METHOD OF SUBMERGED ANCHOR CABLES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(4): 921-928. DOI: 10.6052/0459-1879-21-583 |
[3] | Zhang Yi, Xue Shifeng, Han Limei, Zhou Bo, Liu Jianlin, Jia Peng. EXPERIMENTAL CHARACTERIZATION AND NUMERICAL SIMULATION OF DAMAGE EVOLUTION IN SEMI-CRYSTALLINE POLYMERS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(6): 1671-1683. DOI: 10.6052/0459-1879-21-101 |
[4] | Du Chengbin, Jin Licheng, Wu Zhiqin. DAMAGE INDEX METHOD FOR DETECTION OF FLAWS BASED ON DYNAMIC RESPONSE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(6): 1841-1855. DOI: 10.6052/0459-1879-19-221 |
[5] | Wang Zenghui, Li Xikui. MESO-MECHANICALLY INFORMED MACROSCOPIC CHARACTERIZATION OF DAMAGE-HEALING-PLASTICITY FOR GRANULAR MATERIALS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(2): 284-296. DOI: 10.6052/0459-1879-17-362 |
[6] | Li Xueyan, Zhang Huimin. STUDY OF DAMAGE IDENFICATION METHOD BASED ON THE COVARIANCE OF STRAIN IMPULSE RESPONSE FUNCTION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(5): 1081-1090. DOI: 10.6052/0459-1879-17-039 |
[7] | Identification of damage in rectangular plates based on neural network technique with sub-regions[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(3): 374-377. DOI: 10.6052/0459-1879-2005-3-2003-261 |
[8] | On load identification for piezoelectric smart structures[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(4): 491-495. DOI: 10.6052/0459-1879-2004-4-2002-235 |
[9] | THE UNIFICATION OF DAMAGE WITH FRACTURE[J]. Chinese Journal of Theoretical and Applied Mechanics, 1991, 23(1): 123-128. DOI: 10.6052/0459-1879-1991-1-1995-818 |
[10] | THE IDENTIFICATION OF DYNAMIC PARAMETERS OF STRUCTURE AND THE IMPROVEMENT OF MATHE-MATIC MODEL TO CALCULATE DYNAMIC RESPONSE[J]. Chinese Journal of Theoretical and Applied Mechanics, 1990, 22(4): 429-437. DOI: 10.6052/0459-1879-1990-4-1995-966 |