EI、Scopus 收录
中文核心期刊
Volume 53 Issue 9
Sep.  2021
Turn off MathJax
Article Contents
Hou Xianwei, Xiong Wei, Chen Haihua, Zhang Xianfeng, Wang Haiying, Dai Lanhong. Impact energy release and damage characteristics of two high-entropy alloys. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(9): 2528-2540 doi: 10.6052/0459-1879-21-327
Citation: Hou Xianwei, Xiong Wei, Chen Haihua, Zhang Xianfeng, Wang Haiying, Dai Lanhong. Impact energy release and damage characteristics of two high-entropy alloys. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(9): 2528-2540 doi: 10.6052/0459-1879-21-327

IMPACT ENERGY RELEASE AND DAMAGE CHARACTERISTICS OF TWO HIGH-ENTROPY ALLOYS

doi: 10.6052/0459-1879-21-327
  • Received Date: 2021-07-08
  • Accepted Date: 2021-08-18
  • Available Online: 2021-08-19
  • Publish Date: 2021-09-18
  • In order to explore the impact energy release characteristics regularities of two typical high-entropy alloy materials, using the Φ14.5 mm ballistic gun launcher, the quasi-sealed test chamber system, two typical high-entropy alloy fragments, the FeNiMoW and the FeNiCoCr, were carried out the release energy effect tests at different impact velocities. Furthermore, the test platform was used to study the penetration and damage effect of two high-entropy alloy fragments to multi-layered targets, which were placed to the bottom of the test chamber. By changing the thickness of the steel target fixed in front of the test chamber, the impact release energy characteristics and damage regularities of two high-entropy alloy fragments to the subsequent multi-layered targets were studied. The study found that FeNiMoW and FeNiCoCr high-entropy alloy fragments began to react releasing chemical energy at around 1356 m/s and 1217 m/s, respectively. There was no chemical reaction reacted below this velocity. It was obvious that the impact velocities had a great influence to the release energy of the two high-entropy alloy fragments. As the velocity increased, the energy release response of the fragments became more intense, the peak overpressure showed a rising trend and the rising velocity became faster. As the thickness of the front steel target increased from 1 mm to 5 mm at an impact velocity of approximately 1600 m/s, it could be seen that the peak overpressures of FeNiMoW fragments showed a rise trend, and the peak overpressures of FeNiCoCr fragments showed a downward trend. In the process of the fragments perforating the front steel target and penetrating the multi-layered aluminum targets, the reduction of the release energy reaction degree will contribute to the enhancement of the penetration effect of the fragments, and the more increasing thickness of the front steel target will reduce the penetration and damage effect of the fragments to the multi-layered aluminum targets. On the other hand, as the thickness of the front steel target increases, the area of the first layer of aluminum target damaged by the fragments first increases and then decreases.

     

  • loading
  • [1]
    吕昭平, 雷智锋, 黄海龙等. 高熵合金的变形行为及强韧化. 金属学报, 2018, 54(11): 1553-1566 (Lü Zhaoping, Lei Zhifeng, Huang Hailong, et al. Deformation behavior and toughening of high-entropy alloys. Acta Metallurgica Sinica, 2018, 54(11): 1553-1566 (in Chinese) doi: 10.11900/0412.1961.2018.00372
    [2]
    张勇, 陈明彪, 杨潇. 先进高熵合金技术. 北京: 化学工业出版社, 2017

    (Zhang Yong, Chen Mingbiao, Yang Xiao. Advanced High-entropy Alloy Technology. Beijing: Chemical Industry Press, 2017 (in Chinese))
    [3]
    Miracle DB, Senkov ON. A critical review of high-entropy alloys and related concepts. Acta Materialia, 2017, 122: 448-511 doi: 10.1016/j.actamat.2016.08.081
    [4]
    Chou HP, Chang YS, Chen SK, et al. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys. Materials Science and Engineering:B, 2009, 163(3): 184-189 doi: 10.1016/j.mseb.2009.05.024
    [5]
    Tsai KY, Tsai MH, Yeh JW. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys. Acta Materialia, 2013, 61(13): 4887-4897 doi: 10.1016/j.actamat.2013.04.058
    [6]
    Gludovatz B, Hohenwarter A, Catoor D, et al. A fracture-resistant high-entropy alloy for cryogenic applications. Science, 2014, 345(6201): 1153-1158 doi: 10.1126/science.1254581
    [7]
    杨铭, 刘雄军, 吴渊等. 高熵非晶合金研究进展. 中国科学:物理学 力学 天文学, 2020, 50(6): 21-33 (Yang Ming, Liu Xiongjun, Wu Yuan, et al. Research progress on high-entropy bulk metallic glasses. Sci Sin-Phys Mech Astron, 2020, 50(6): 21-33 (in Chinese)
    [8]
    温晓灿, 张凡, 雷智锋等. 高熵合金中的第二相强韧化. 中国材料进展, 2019, 38(03): 242-250 (Wen Xiaocan, Zhang Fan, Lei Zhifeng, et al. Second phase strengthening in high-entropy alloys. Materials China, 2019, 38(03): 242-250 (in Chinese)
    [9]
    Zhang WR, Liaw PK, Zhang Y. Science and technology in high-entropy alloys. Science China Materials, 2018, 61(1): 2-22
    [10]
    张勇, 周云军, 惠希东等. 大块金属玻璃及高熵合金的合金化作用. 中国科学(G 辑:物理学 力学 天文学), 2008(4): 439-448 (Zhang Yong, Zhou Yunjun, Hui Xidong, et al. Alloying effect of bulk metallic glass and high-entropy alloy. Sci Sin-Phys Mech Astron, 2008(4): 439-448 (in Chinese)
    [11]
    李建国, 黄瑞瑞, 张倩等. 高熵合金的力学性能及变形行为研究进展. 力学学报, 2020, 52(2): 333-359 (Li Jianguo, Huang Ruirui, Zhang Qian, et al. Mechnical properties and behaviors of high-entropy alloys. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(2): 333-359 (in Chinese)
    [12]
    Zhang Z, Hong Z, Yu T, et al. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.53. Materials & Design, 2017, 133: 435-443
    [13]
    张周然. HfZrTiTax高熵合金含能结构材料的组织结构与力学性能研究. [硕士论文]. 长沙: 国防科技大学, 2017

    (Zhang Zhouran. Microstructure and mechanical properties of HfZrTiTax high-entropy alloys energetic structural materials. [Master's Thesis]. Changsha: National University of Defense Technology, 2017 (in Chinese))
    [14]
    王睿鑫. NbZrTiTa高熵合金的组织结构演变及结构释能特性研究. [硕士论文]. 长沙: 国防科技大学, 2018

    (Wang Ruixin. Microstructure evolution and energetic structural properties of NbZrTiTa high-entropy alloy. [Master's Thesis]. Changsha: National University of Defense Technology, 2018 (in Chinese))
    [15]
    李甲, 冯慧, 陈阳等. 高熵合金强韧化理论建模与模拟研究进展. 固体力学学报, 2020, 41(2): 93-108 (Li Jia, Feng Hui, Chen Yang, et al. Progress in theoretical modeling and simulation on strengthening and toughening of high-entropy alloys. Chinese Journal of Solid Mechanics, 2020, 41(2): 93-108 (in Chinese)
    [16]
    Chu C, Chen W, Chen Z, et al. Microstructure and mechanical behavior of FeNiCoCr and FeNiCoCrMn high-entropy alloys fabricated by powder metallurgy. Acta Metallurgica Sinica (English Letters) , 2021, 34(4): 445-454 doi: 10.1007/s40195-020-01150-9
    [17]
    Xu J, Kong X, Chen M, et al. High-entropy FeNiCoCr alloys with improved mechanical and tribological properties by tailoring composition and controlling oxidation. Journal of Materials Science & Technology, 2021, 82: 207-213
    [18]
    Wu P, Gan K, Yan D, et al. A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy. Corrosion Science, 2021, 183: 109341 doi: 10.1016/j.corsci.2021.109341
    [19]
    Lin WT, Chen D, Dang CQ, et al. Highly pressurized helium nanobubbles promote stacking-fault-mediated deformation in FeNiCoCr high-entropy alloy. Acta Materialia, 2021, 210: 116843 doi: 10.1016/j.actamat.2021.116843
    [20]
    Zhang TW, Ma SG, Zhao D, et al. Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: micromechanism and constitutive modeling. International Journal of Plasticity, 2020, 124: 226-246 doi: 10.1016/j.ijplas.2019.08.013
    [21]
    陈海华, 张先锋, 熊玮等. WFeNiMo高熵合金动态力学行为及侵彻性能研究. 力学学报, 2020, 52(5): 1443-1453 (Chen Haihua, Zhang Xianfeng, Xiong Wei, et al. Dynamic mechanical behavior and penetration performance of WFeNiMo high-entropy alloy. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(5): 1443-1453 (in Chinese)
    [22]
    Liu XF, Tian ZL, Zhang XF, et al. “Self-sharpening” tungsten high entropy alloy. Acta Materialia, 2020, 186: 257-266 doi: 10.1016/j.actamat.2020.01.005
    [23]
    熊玮, 张先锋, 陈亚旭等. 冷轧成型Al/Ni多层复合材料力学行为与冲击释能特性研究. 爆炸与冲击, 2019, 39(5): 130-138 (Xiong Wei, Zhang Xianfeng, Chen Yaxu, et al. Mechanical properties and shock-induced chemical reaction behaviors of cold-rolled Al/Ni multi-layered composites. Explosion And Shock Waves, 2019, 39(5): 130-138 (in Chinese)
    [24]
    宋鸿武, 陈岩, 程明等. 异种金属层状复合材料累积叠轧工艺的研究进展. 材料导报, 2011, 25(19): 7-12 (Song Hongwu, Chen Yan, Cheng Ming, et al. Progresses in the accumulative roll-bonding of clad bimetals. Materials Review, 2011, 25(19): 7-12 (in Chinese)
    [25]
    Lynch DD, Kunkel RW, Juarascio SS. An analysis comparison using the vulnerability analysis for surface targets (VAST) computer code and the computation of vulnerable area and repair Time (COVART III) computer code: ARL-MR-341. USA: Army Research Laboratory, 1997
    [26]
    Ames RG. Vented chamber calorimetry for impact-initiated energetic materials//43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005
    [27]
    Ames RG. Energy release characteristics of impact-initiated energetic materials//MRS Online Proceedings Library (OPL), 2005: 896
    [28]
    Ames RG, Waggener SS. Reaction efficiencies for impact-initiated energetic materials//Proceedings of the 32nd International Pyrotechnics Seminar, Karlsruhe, Germany. 2005: 28
    [29]
    Fischer S, Grubelich M. A survey of combustible metals, thermites, and intermetallics for pyrotechnic applications//32nd Joint Propulsion Conference and Exhibit. 1996: 3018
    [30]
    Wang CT, He Y, Ji C, et al. Investigation on shock-induced reaction characteristics of a Zr-based metallic glass. Intermetallics, 2018, 93: 383-388 doi: 10.1016/j.intermet.2017.11.004
    [31]
    陈曦, 杜成鑫, 程春等. Zr基非晶合金材料的冲击释能特性. 兵器材料科学与工程, 2018, 41(6): 44-49 (Chen Xi, Du Chengxin, Cheng Chun, et al. Impact energy releasing characteristics of Zr-based amorphous alloy. Ordnance Material Science and Engineering, 2018, 41(6): 44-49 (in Chinese)
    [32]
    Zhang YF, Luo XB, Liu GQ, et al. Shock-induced reaction characteristics of porous W/Zr-based metallic glass composite fragments. Rare Metal Materials and Engineering, 2020, 49(8): 2549-2556
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(22)  / Tables(5)

    Article Metrics

    Article views (722) PDF downloads(162) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return