REVIEW OF RESEARCH PROGRESSES OF THE QUANTIFYING JOINT ROUGHNESS COEFFICIENT

Chen Shijiang; Zhu Wancheng; Wang Chuangye; Zhang Fei

doi:10.6052/0459-1879-16-255

Volume 49 Issue 2

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Theoretical and Applied Mechanics > 2017 > 49(2): 239-256

Chen Shijiang, Zhu Wancheng, Wang Chuangye, Zhang Fei. REVIEW OF RESEARCH PROGRESSES OF THE QUANTIFYING JOINT ROUGHNESS COEFFICIENT[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(2): 239-256. doi: 10.6052/0459-1879-16-255

Citation:

Chen Shijiang, Zhu Wancheng, Wang Chuangye, Zhang Fei. REVIEW OF RESEARCH PROGRESSES OF THE QUANTIFYING JOINT ROUGHNESS COEFFICIENT[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(2): 239-256. doi: 10.6052/0459-1879-16-255

Citation:

PDF( 1066 KB)

REVIEW OF RESEARCH PROGRESSES OF THE QUANTIFYING JOINT ROUGHNESS COEFFICIENT

doi: 10.6052/0459-1879-16-255

*.
Institute of Mining Research, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia, China
†.
School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China

Received Date: 2016-09-09
Available Online: 2016-11-11
Publish Date: 2017-03-18

Abstract

Abstract

The joint roughness coefficient (JRC) method was suggested by International Society for Rock Mechanics to estimate joint roughness in 1978. Although this method is widely used in engineering practices, there is a shortcoming of subjectivity and experience relied on investigator. So, the research works about quantifying joint roughness were developed by authors in the world. In this article, firstly, we introduced the research progress about quantitative characterization on both joint profiles and discontinuities roughness, and summarized the results of relationship between the parameters and JRC. Secondly, we evaluated the essential properties and applicability of each parameter, pointed out the problems about the parameters in obtained process including sampling interval influence, deciding triangulation of an elementary surface and determining the weight of each parameter in the comprehensive parameters method. At the same time, we gave the author's ideas of solving the problems. In addition, we discussed anisotropy and size effect of surface roughness in detail, on which are focused by researchers. Finally, we predict that fractal dimension remain a method to describe surface roughness and 3D printing technology can be helpful to research anisotropy and size effect of rock discontinuities roughness.
- rock mechanics,
- rock discontinuities,
- joint roughness,
- research progress

FullText(HTML)

References(91)

References

[1]	Barton N. Review of a new shear strength criterion for rock joints. Engineering Geology, 1973, 7(4):287-332 doi: 10.1016/0013-7952(73)90013-6
[2]	Barton N, Choubey V. The shear strength of rock joints in theory and practice. Rock Mechanics, 1977, 10(1-2):1-54 doi: 10.1007/BF01261801
[3]	International Society for Rock Mechanics. Suggested methods for the quantitative description of discontinuities in rock masses. International Journal of Rock Mechanics and Mining Sciences, 1978, 15(6):319-368 doi: 10.1016/0148-9062(78)91472-9
[4]	Beer AJ, Stead D, Coggan JS. Estimation of the joint roughness coefficient (JRC) by visual comparison. Rock Mechanics and Rock Engineering, 2002, 35(1):65-74 doi: 10.1007/s006030200009
[5]	Tse R, Cruden DM. Estimating joint roughness coefficients. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1979, 16(5):303-307 doi: 10.1016/0148-9062(79)90241-9
[6]	Myers NO. Characterization of surface roughess. Wear, 1962, (5): 182-189 https://www.researchgate.net/publication/229359315_Characterization_of_surface_roughness
[7]	Yang ZY, Lo SC, Di CC. Reassessing the joint roughness coeffi-cient (JRC) estimation using Z₂. Rock Mechanics and Rock Engineering, 2001, 34(3):243-251 doi: 10.1007/s006030170012
[8]	Zhang GC, Karakus M, Tang HM, et al. A new method estimating the 2D joint roughness coefficient for discontinuity surfaces in rock masses. International Journal of Rock Mechanics and Mining Sciences, 2014, 72:191-198 doi: 10.1016/j.ijrmms.2014.09.009
[9]	Yu XB, Vayssade B. Joint Profiles and their Roughness Parameters. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1991, 28(4):333-336 doi: 10.1016/0148-9062(91)90598-G
[10]	Belem T, Homand-Etienne F, Souley M. Quantitative parameters for rock joint surface roughness. Rock Mechanics and Rock Engineering, 2000, 33(4):217-242 doi: 10.1007/s006030070001
[11]	Ei-Soudani SM. Profilometric analysis of fractures. Metallography, 1978, 11(3):247-336 doi: 10.1016/0026-0800(78)90045-9
[12]	Maerz NH, Franklin JA, Bennett CP. Joint roughness measurement using shadow profilometry. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1990, 27(5):329-343 doi: 10.1016/0148-9062(90)92708-M
[13]	王建锋.岩体结构面粗糙度JRC研究进展.地质科技情报, 1991, 10(2):73-78 http://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ199102020.htm Wang Jianfeng. Development and tendency in resrarch of joint roughness coefficient of rock masses. Geological Science and Technology Information, 1991, 10(2):73-78(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ199102020.htm
[14]	杜时贵, 郭霄.岩体结构面粗糙度系数JRC的研究现状.水文地质工程地质, 2004(S):30-33 http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG2003S1006.htm Du Shigui. Recent development of the joint roughness coefficient (JRC). Hydrogelogy and Engineering Geology, 2004(S):30-33(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG2003S1006.htm
[15]	陈世江, 赵自豪, 王超.基于修正线粗糙度法的岩石节理粗糙度估值.金属矿山, 2012, 41(6):22-25 http://www.cnki.com.cn/Article/CJFDTOTAL-JSKS201206008.htm Chen Shijiang, Zhao Zihao, Wang Chao. Estimation of rock joint roughness based on modified line-roughness. Metal Mine, 2012, 41(6):22-25(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JSKS201206008.htm
[16]	Mandelbrot BB. The Fractal Geometry of Nature. New York: Freeman, 1982
[17]	谢和平.岩石节理的分形描述.岩土工程学报, 1995, (1):18-24 http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC501.002.htm Xie Heping. Fractal description of rock joints. Chinese Journal of Geotechnical Engineering, 1995, (1):18-24(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC501.002.htm
[18]	Turk N, Greig MJ, Dearrnan WR, et al. Characterization of rock joint surfaces by fractal dimension//28th U.S. Syrup. on Rock Mechanics, University of Arizona, 1987:1223-1236
[19]	Carr JR, Warriner JB. Relationship between the fractal dimension and joint roughness coefficient//Bull Association of Engineering Geologists, 1989:253-263
[20]	Lee YH, Cart JR, Barr DJ, et al. The fractal dimension as a measure of the roughness of rock discontinuity profiles. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1990, 27(6):453-464 doi: 10.1016/0148-9062(90)90998-H
[21]	Wakabayashi N, Fukushige I. Experimental study on the relation between fractal dimension and shear strength//Proc Conference on Fractured and Jointed Rock Masses. Lake Tahoe:Lawrence Berkeley Laboratory, 1992:101-110
[22]	刘松玉.节理粗糙度的分维测定法.勘察科学技术, 1993, (6): 26-29 http://www.cnki.com.cn/Article/CJFDTOTAL-KCKX199306008.htm Liu Songyu. Fractional dimension method of JRC measurement. Site Investigation Science and Technology, 1993, (6):26-29(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-KCKX199306008.htm
[23]	秦四清, 张倬元, 王士天等.节理粗糙度曲线的分维特征.成都地质学院学报, 1993, 20(4):109-112 http://www.cnki.com.cn/Article/CJFDTOTAL-CDLG199304018.htm Qing Siqing, Zhang Zhuoyuan, Wang Shitian, et al. Fractal dimension characteristics of joint roughness curves. Journal of Chengdu College of Geology, 1993, 20(4):109-112(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-CDLG199304018.htm
[24]	杨更社.岩体节理面的分形与分维研究.西安矿业学院学报, 1993, (3):212-216 http://www.cnki.com.cn/Article/CJFDTOTAL-XKXB199303003.htm Yang Gengshe. Research on the fractal and fractal dimension of joints in rock mass. Journal of Xi'an Mining Institute, 1993, (3):212-216(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-XKXB199303003.htm
[25]	祝玉学.岩石节理表面粗糙度的分形表征.中国矿业, 1994, 3(5):51-56 http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKA199405011.htm Zhu Yuxue. Fractal characterization of rock joint roughness. China Mining Magazine, 1994, 3(5):51-56(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKA199405011.htm
[26]	周创兵, 熊文林.不连续面的分形维数及其在渗流分析中的应用.水文地质工程地质, 1996, (6):1-5 http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG606.000.htm Zhou Chuangbin, Xiong Wenlin. Application of seepage of the discontinuous surface using fractal dimension. Hydrogeology and Engineering Geology, 1996, (6):1-5(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG606.000.htm
[27]	冯夏庭, Masayuki Kosugi, 王泳嘉.岩石节理力学参数的非线性估计.岩土工程学报, 1999, 21(3):268-272 http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC903.002.htm Feng Xiating, Masayuki Kosugi, Wang Yongjia. Nonlinear estimation of rock joint mechanical parameters. Chinese Journal of Geotechnical Engineering, 1999, 21(3):268-272(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC903.002.htm
[28]	张林洪.结构面抗剪强度的一种确定方法.岩石力学与工程学报, 2001, 20(1):114-117 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200101027.htm Zhang Linhong. A determination method of joint shear strength. Chinese Journal of Rock Mechanics and Engineering, 2001, 20(1):114-117(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200101027.htm
[29]	许宏发, 李艳茹, 刘新宇等.节理面分形模拟及JRC与分维的关系.岩石力学与工程学报, 2002, 21(11):1663-1666 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200211017.htm Xu Hongfa, Li Yanru, Liu Xinyu, et al. Fractal simulation of joint profiles and relationship between JRC and fractal dimension. Chinese Journal of Rock Mechanics and Engineering, 2002, 21(11):1663-1666(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200211017.htm
[30]	朱珍德, 邢福东, 渠文平等.岩石——混凝土两相介质胶结面粗糙系数的分形描述.煤炭学报, 2006, 31(1):20-25 http://www.cnki.com.cn/Article/CJFDTOTAL-MTXB200601004.htm Zhu Zhende, Xing Fudong, Qu Wenping, et al. Fractal description of two-phase medium cementation plane roughness coefficient between rock and concrete. Journal of China Coal Society, 2006, 31(1):20-25(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-MTXB200601004.htm
[31]	朱珍德, 邢福东, 渠文平等.岩石——混凝土两相介质胶结面抗剪强度分形描述.岩石力学与工程学报, 2006, 25(增1):2910-2917 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2006S1046.htm Zhu Zhende, Xing Fudong, Qu Wenping, et al. Fractal description of shear strength of cementation plane between rock and concrete. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(s1):2910-2917(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2006S1046.htm
[32]	曹平, 贾洪强, 刘涛影等.岩石节理表面三维形貌特征的分形分析.岩石力学与工程学报, 2011, 30(增2):3839-3843 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2011S2062.htm Cao Ping, Jia Hongqiang, Liu Taoying, et al. Fractal analysis of threedimensional topography characteristics of rock joint surface. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(s2): 3839-3843(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2011S2062.htm
[33]	游志诚, 王亮清, 杨艳霞等.基于三维激光扫描技术的结构面抗剪强度参数各向异性研究.岩石力学与工程学报, 2014, 33(增1):3003-3008 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S1058.htm You Zhicheng, Wang Liangqing, Yang Yanxia, et al. Anisotropic research on shear strength parameters of discontinuity based on three-dimensional laser scanning technology. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(s1):3003-3008(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S1058.htm
[34]	Kulatilake PHSW, Balasingam P, Park J, et al. Natural rock joint roughness quantification through fractal techniques. Geotechnical and Geological Engineering, 2006, 24(5):1181-1202 doi: 10.1007/s10706-005-1219-6
[35]	Kulatilake PHSW, Park J, Balasingam P, et al. Quantification of aperture and relations between aperture, normal stress and fluid flow for natural single rock fractures. Geotechnical and Geological Engineering, 2008, 26(3):269-281 doi: 10.1007/s10706-007-9163-2
[36]	Fardin N, Stephansson O, Jing L. The scale dependence of rock joint surface roughness. International Journal of Rock Mechanics & Mining Sciences, 2001, 38(5):659-669 https://www.researchgate.net/publication/222206786_The_scale_dependence_of_rock_joint_surface_roughness
[37]	Fardin N, Feng Q, Stephansson O. Application of a new in situ 3D laser scanner to study the scale effect on the rock joint surface roughness. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(2):329-335 doi: 10.1016/S1365-1609(03)00111-4
[38]	徐磊, 任青文, 叶志才等.岩体结构面三维表面形貌的尺寸效应研究.武汉理工大学学报, 2008, 30(4):103-105 http://www.cnki.com.cn/Article/CJFDTOTAL-WHGY200804030.htm Xu Lei, Ren Qingwen, Ye Zhicai, et al. Research on the scale effect on the 3-D surface topography of rock joint. Journal of Wuhan University of Technology, 2008, 30(4):103-105(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-WHGY200804030.htm
[39]	Grasselli G, Wirthc J, Egger P. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing. International Journal of Rock Mechanics and Mining Sciences, 2002, 39(6):789-800 doi: 10.1016/S1365-1609(02)00070-9
[40]	Re F, Scavia C. Determination of contact areas in rock joints by Xray computer tomography. International Journal of Rock Mechanics and Mining Sciences, 1999, 36(7):883-890 doi: 10.1016/S0148-9062(99)00056-X
[41]	孙辅庭, 佘成学, 万利台.新的岩石节理粗糙度指标研究.岩石力学与工程学报, 2013, 32(12):2513-2519 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201312018.htm Sun Futing, She Chengxue, Wang Litai. Research on a new roughness index of rock joint. Chinese Journal of Rock Mechanics and Engineering, 2013, 32(12):2513-2519(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201312018.htm
[42]	Yang ZY, Di CC, Yen KC. The effect of asperity order on the roughness of rock joints. International Journal of Rock Mechanics and Mining Sciences, 2001, 38(5):745-752 doi: 10.1016/S1365-1609(01)00032-6
[43]	陈世江, 朱万成, 张敏思等.基于数字图像处理技术的岩石节理分形描述.岩土工程学报, 2012, 34(11):2087-2092 http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201211019.htm Chen Shijiang, Zhu Wancheng, Zhang Minsi, et al. Fractal description of rock joints based on digital image processing technique. Chinese Journal of Geotechnical Engineering, 2012, 34(11):2087-2092(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201211019.htm
[44]	唐志成, 宋英龙.一种描述结构面剖面线粗糙度的新方法.工程地质学报, 2011, 19(2):250-253 http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ201102019.htm Tang Zhicheng, Song Yinglong. New method for assessing rock discontinuity roughness on linear profiles. Journal of Engineering Geology, 2011, 19(2):250-253(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ201102019.htm
[45]	李化, 黄润秋.岩石结构面粗糙度系数JRC定量确定方法研究.岩石力学与工程学报, 2014, 33(增2)3489-3497 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S2013.htm Li Hua, Huang Runqiu. Method of quantitative determination of joint roughness coefficient. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(s2):3489-3497(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S2013.htm
[46]	Barton N, Bandis S. Effects of block size on the shear behavior of jointed rock. The 23rd US Symposium on Rock Mechanics, Berkeley:1982:739-760
[47]	杜时贵, 陈禹, 樊良本. JRC修正直边法的数学表达.工程地质学报, 1996, 4(2):36-43 http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ602.006.htm Du Shigui, Chen Yu, Fan Lingben. Mathematical expression of JRC modified straight edge. Journal of Engineering Geology, 1996, 4(2):36-43(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ602.006.htm
[48]	Tatone BSA, Grasselli G. A method to evaluate the threedimensional roughness of fracture surfaces in brittle geomaterials. Review of Scientific Instruments, 2009, 80(12):1-10 https://www.researchgate.net/publication/40897018_A_method_to_evaluate_the_three-dimensional_roughness_of_fracture_surfaces_in_brittle_geomaterials
[49]	Aydanö, Shimizu Y, Kawamoto T. The anisotropy of surface morphology characteristics of rock discontinuities. Rock Mechanics and Rock Engineering, 1996, 29(1):47-59 doi: 10.1007/BF01019939
[50]	Grasselli G, Egger P. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(1):25-40 doi: 10.1016/S1365-1609(02)00101-6
[51]	Tatone BSA, Grasselli G. A new 2D discontinuity roughness parameter and its correlation with JRC. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(8):1391-1400 doi: 10.1016/j.ijrmms.2010.06.006
[52]	Jang HS, Kang SS, Jang BA. Determination of Joint Roughness Coefficients Using Roughness Parameters. Rock Mechanics and Rock Engineering, 2014, 47(6):2061-2073 doi: 10.1007/s00603-013-0535-z
[53]	葛云峰, 唐辉明, 黄磊等.岩体结构面三维粗糙度系数表征新方法.岩石力学与工程学报, 2012, 31(12):2508-2515 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201212016.htm Ge Yunfeng, Tang Huiming, Huang Lei, et al. A new representation method for three-dimensional joint roughness coefficient of rock mass discontinuities. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(12):2508-2515(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201212016.htm
[54]	Ge YF, Tang HM, Ez Eldin MAM, et al. A description for rock joint roughness based on terrestrial laser scanner and image analysis. Scientific Reports, 2015, 5:16999, DOI: 10.1038/srep16999
[55]	陈世江, 朱万成, 刘树新等.岩体结构面粗糙度各向异性特征及尺寸效应分析.岩石力学与工程学报, 2015, 34(1):57-66 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201501007.htm Chen Shijiang, Zhu Wancheng, Liu Shuxin, et al. Anisotropy and size effects of surface roughness of rock joints. Chinese Journal of Rock Mechanics and Engineering, 2015, 34(1):57-66(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201501007.htm
[56]	Chen SJ, Zhu WC, Yu QL, et al. Characterization of anisotropy of joint surface roughness and aperture by variogram approach based on digital image processing technique. Rock Mechanics and Rock Engineering, 2016, 49(3):855-876 doi: 10.1007/s00603-015-0795-x
[57]	王思敬.论岩石的地质本质性及其岩石力学演绎.岩石力学与工程学报, 2009, 28(3):433-450 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200903002.htm Wang Sijing. Geological nature of rock and its deduction for rock mechanics. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(3):433-450(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200903002.htm
[58]	孙洪泉.地质统计学及其应用.徐州:中国矿业大学出版社, 1990:31-95 Sun Hongquan. Geostatistics and Its Application. Xuzhou:China University of Mining and Technology Press, 1990:31-95(in Chinese)
[59]	陈世江, 朱万成, 王创业等.考虑各向异性特征的三维岩体结构面峰值剪切强度研究.岩石力学与工程学报, 2016, 35(10): 2013-2021 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201610008.htm Chen Shijiang, Zhu Wancheng, Wang Chuangye, et al. The peak shear strength criterion of 3D rock discontinuities based on its anisotropic propeties. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(10):2013-2021(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201610008.htm
[60]	尹红梅, 张宜虎, 孔祥辉.结构面剪切强度参数三维分形估算.水文地质工程地质, 2011, 38(4):58-62 http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG201104012.htm Yin Hongmei, Zhang Yihu, Kong Xianghui. Estimation of joint shear strength based on fractal method. Hydrogeology and Engineering Geology, 2011, 38(4):58-62(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG201104012.htm
[61]	陈世江, 朱万成, 于庆磊等.基于多重分形特征的岩体结构面剪切强度研究.岩土力学, 2015, 36(3):703-710 http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201503017.htm Chen Shijiang, Zhu Wancheng, Yu Qinglei, et al. Shear strength research on rock joint surfaces based on multifractal theory. Rock and Soil Mechanics, 2015, 36(3):703-710(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201503017.htm
[62]	Xie HP, Wang JA, Stein E. Direct fractal measurement and multifractal properties of fracture surfaces. Physics Letters A, 1998, 242(1):41-50 https://www.researchgate.net/publication/222329302_Direct_fractal_measurement_and_multifractal_properties_of_fracture_surfaces
[63]	Xie HP, Wang JA. Direct fractal measurement of fracture surfaces. International Journal of Solids and Structures, 1999, 36(20):3073-3084 doi: 10.1016/S0020-7683(98)00141-3
[64]	Yang ZY, Lo SC. An index for describing the anisotropy of joint surfaces. International Journal of Rock Mechanics and Mining Sciences, 1997, 34(6):1031-1044 doi: 10.1016/S1365-1609(97)80012-3
[65]	Babanouri N, Nasab SK, Sarafrazi S. A hybrid particle swarm optimization and multi-layer perceptron algorithm for bivariate fractal analysis of rock fractures roughness. International Journal of Rock Mechanics and Mining Science, 2013, 60:66-74 doi: 10.1016/j.ijrmms.2012.12.028
[66]	Yang ZY, Di CC, Lo SC. Two-dimensional hurst index of joint surfaces. Rock Mechanics and Rock Engineering, 2001, 34(4):323-345 doi: 10.1007/s006030170004
[67]	周宏伟, 谢和平, Kwasniewski MA等.岩体节理表面形貌的各向异性研究.地质力学学报, 2001, 7(2):123-128 http://www.cnki.com.cn/Article/CJFDTOTAL-DZLX200102004.htm Zhou Hongwei, Xie Heping, Kwasniewski MA, et al. On anisotropy of surface topography of rock joint. Journal of Geomechanics, 2001, 7(2):123-128(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-DZLX200102004.htm
[68]	李久林, 唐辉明.结构面粗糙度和抗剪强度的各向异性效应.工程勘察, 1994, (5):12-16 http://www.cnki.com.cn/Article/CJFDTOTAL-GCKC405.002.htm Li Jiulin, Tang Huiming. Anisotropic effect of joint roughness and shear strength. Geotechnical Investigation and Surveying, 1994, (5):12-16(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCKC405.002.htm
[69]	杜时贵, 唐辉明.岩体断裂粗糙度系数的各向异性研究.工程地质学报, 1993, 1(2):32-41 http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ199302003.htm Du Shigui, Tang Huiming. A study on the anisotropy of joint roughness coefficient in rock mass. Journal of Engineering Geology, 1993, 1(2):32-41(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ199302003.htm
[70]	孙辅庭, 佘成学, 蒋庆仁.一种新的岩石节理面三维粗糙度分形描述方法.岩土力学, 2013, 34(8):2238-2242 http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201308025.htm Sun Futing, She Chengxue, Jiang Qingren. A new fractal description method for three-dimensional roughness surface of rock joint. Rock and Soil Mechanics, 2013, 34(8):2238-2242(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201308025.htm
[71]	杜时贵.简易纵剖面仪及其在岩体结构面粗糙度系数JRC研究中的应用.地质科技情报, 1992, 11(3):91-95 http://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ199203020.htm Du Shigui. Simple profile instrument and its application on studying joint roughness coefficient of rock. Geological Science and Technology Information, 1992, 11(3):91-95(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ199203020.htm
[72]	吉锋, 石豫川.硬性结构面表面起伏形态测量及其尺寸效应研究.水文地质工程地质, 2011, 38(4):63-67 http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG201104014.htm Ji Feng, Shi Yuchuan. A study of the measuring and strength size effect of the surface shape of structure plane. Hydrogeology and Engineering Geology, 2011, 38(4):63-67(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SWDG201104014.htm
[73]	Ueng TS, Jou YJ, Peng IH. Scale effect on shear strength of computer-aided-manufactured joints. Journal of Geoengineering, 2010, 5(2):29-37 https://www.researchgate.net/publication/268352277_Scale_effect_on_shear_strength_of_computer-aided-manufactured_joints
[74]	Vallier F, Mitani Y, Boulon M, et al. A shear model accounting scale effect in rock joints behavior. Rock Mechanics and Rock Engineering, 2010, 43(5):581-595 doi: 10.1007/s00603-009-0074-9
[75]	黄曼, 杜时贵, 罗战友等.基于多尺度直剪试验的岩石模型结构面抗剪强度特征研究.岩土力学, 2013, 34(11):3180-3186 http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201311024.htm Huang Man, Du Shigui, Luo Zhanyou, et al. Study of shear strength characteristics of simulation rock structural planes based on multi-size direct shear tests. Rock and Soil Mechanics, 2013, 34(11):3180-3186(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201311024.htm
[76]	罗战友, 杜时贵, 黄曼.岩石结构面粗糙度系数尺寸效应的推拉试验研究.岩土力学, 2015, 36(12):3381-3386 http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201512006.htm Luo Zhanyou, Du Shigui, Huang Man. An experimental study of size effect of roughness coefficient on rock joint using push-pull apparatus. Rock and Soil Mechanics, 2015, 36(12):3381-3386(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201512006.htm
[77]	杜时贵, 黄曼, 罗战友等.岩石结构面力学原型试验相似材料研究.岩石力学与工程学报, 2010, 29(11):2263-2270 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201011014.htm Du Shigui, Huang Man, Luo Zhanyou, et al. Similar material study of mechanical prototype test of rock structural plane. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(11):2263-2270(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201011014.htm
[78]	夏才初, 孙宗颀.节理表面形貌的室内和现场量测及其应用.勘察科学技术, 1994, (4):27-31 http://www.cnki.com.cn/Article/CJFDTOTAL-KCKX199404009.htm Xia Caichu, Sun Zongqi. Laboratory and field measurements of the superficial morphology of joints and their applications. Editorial Office of Site Investigation Science and Technology, 1994, (4):27-31(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-KCKX199404009.htm
[79]	夏才初, 王伟, 丁增志. TJXW-3D型便携式岩石三维表面形貌仪的研制.岩石力学与工程学报, 2008, 27(7):1505-1512 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200807029.htm Xia Caichu, Wang Wei, Ding Zengzhi. Development of threedimensional TJXW-3D typed portable rock surface topography. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(7):1505-1512(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200807029.htm
[80]	Belem T, Souley M, Homand F. Modeling surface roughness degradation of rock joint wall during monotonic and cyclic shearing. Acta Geotechnica, 2007, 2(4):227-248 doi: 10.1007/s11440-007-0039-7
[81]	曹平, 罗磊, 刘涛影等.岩石节理面粗糙度的分形效应与试件尺寸影响分析.科技导报, 2011, 29(24):57-61 http://www.cnki.com.cn/Article/CJFDTOTAL-KJDB201124022.htm Cao Ping, Luo Lei, Liu Taoying, et al. Analysis of the fractal and sample size effects the rock joint surface roughness. Science and Technology Review, 2011, 29(24):57-61(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-KJDB201124022.htm
[82]	Jiang Q, Feng XT, Gong YH, et al. Reverse modelling of natural rock joints using 3D scanning and 3D printing. Computers and Geotechnics, 2016, 73:210-220 doi: 10.1016/j.compgeo.2015.11.020
[83]	熊祖强, 江权, 龚彦华等.基于三维扫描与打印的岩体自然结构面试样制作方法与剪切试验验证.岩土力学, 2015, 36(6):1557-1565 http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201506005.htm Xiong Zuqiang, Jiang Quan, Gong Yanhua, et al. A method for preparing natural joints of rock mass based on 3D scanning and printing techniques and its experimental validation. Rock and Soil Mechanics, 2015, 36(6):1557-1565(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201506005.htm
[84]	Mah J, Samson C, McKinnon SD, et al. 3D laser imaging for surface roughness analysis. International Journal of Rock Mechanics and Mining Sciences, 2013, 58:111-117 doi: 10.1016/j.ijrmms.2012.08.001
[85]	Fekete S, Diederichs M. Integration of three-dimensional laser scanning with discontinuum modelling for stability analysis of tunnel in blocky rockmasses. International Journal of Rock Mechanics & Mining Science, 2013, 57:11-23 https://www.researchgate.net/publication/257550704_Integration_of_three-dimensional_laser_scanning_with_discontinuum_modelling_for_stability_analysis_of_tunnels_in_blocky_rockmasses
[86]	胡超, 周宜红, 赵春菊等.基于三维激光扫描数据的边坡开挖质量评价方法研究.岩石力学与工程学报, 2014, 32(增2):3979-3984 http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S2075.htm Hu Chao, Zhou Yihong, Zhao Chunju, et al. Slope excavation quality evaluation based on three-dimensional laser scan data. Chinese Journal of Rock Mechanics and Engineering, 2014, 32(s2):3979-3984(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2014S2075.htm
[87]	葛云峰, 唐辉明, 王亮清等.天然岩体结构面粗糙度各向异性、尺寸效应、间距效应研究.岩土工程学报, 2016, 38(1):170-179 http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201601021.htm Ge Yunfeng, Tang Huiming, Wang Liangqing, et al. Anisotropy, scale and interval effects of natural rock discontinuity surface roughness. Chinese Journal of Geotechnical Engineering, 2016, 38(1): 170-179(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201601021.htm
[88]	Kulatilake PHSW, Um J, Pan G. Requirements for accurate estimation of fractal parameters for self-affine roughness profiles using the line scaling. Rock Mechanics and Rock Engineering, 1997, 30(4):181-206 doi: 10.1007/BF01045716
[89]	Kulatilake PHSW, Um J. Requirement for accurate quantification of self-affine roughness using the roughness-length method. International Journal of Rock Mechanics and Mining Sciences, 1999, 36: 5-18 doi: 10.1016/S0148-9062(98)00170-3
[90]	Kulatilake PHSW, Um J, Pan G. Requirements for accurate quantification of self-affine roughness using the variogram method. International Journal of Solids and Structures, 1998, 35(31):4167-4189 https://www.researchgate.net/publication/245476064_Requirements_for_accurate_quantification_of_self_affine_roughness_using_the_roughness-length_method
[91]	Ge YF, Kulatilake PHSW, Tang HM, et al. Investigation of natural rock joint roughness. Computers and Geotechnics, 2014, 55: 290-305 doi: 10.1016/j.compgeo.2013.09.015