| Citation: |
Zhang Jun, Jia Hong. INFLUENCE OF COHESIVE ZONE MODELS SHAPE ON ADHESIVELY BONDED JOINTS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(5): 1088-1095. DOI: 10.6052/0459-1879-16-064
|
|
1 He X. A review of finite element analysis of adhesively bonded joints. International Journal of Adhesion & Adhesives, 2011, 31:248-264
|
|
2 郑锐,林建平,吴倩倩等.结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展.材料工程,2015, 34(3):98-105(Zheng Rui, Lin Jianping, Wu Qianqian, et al. Progress in research on environmental corrosion-resistance of structural adhesive bonding automotive-body metal joint. Journal of Materials Engineering, 2015, 43(3):98-105(in Chinese))
|
|
3 叶斐,杨世文.碳纤维复合材料胶接单搭接接头的力学研究. 汽车实用技术,2015,2:68-70(Ye Fei, Yang Shiwen. The mechanics study of carbon fiber composite single lap adhesive joints. Automobile Applied Technology, 2015,2:68-70(in Chinese))
|
|
4 Barenblatt GI. The formation of equilibrium cracks during brittle fracture:general ideas and hypotheses, axially symmetric crack. Applied Mathematics and Mechanics, 1959, 23:622-636
|
|
5 Dugdale DS. Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids, 1960, 8:100-104
|
|
6 刘湘云,陈普会,马维等.复合材料-金属毛化接头的失效预测模型.固体力学学报, 2015,36(1):55-62(Liu Xiangyun, Chen Puhui, Ma Wei, et al. A model for a composite-metal-weld joint. Journal of Solid Mechanics, 2015, 36(1):55-62(in Chinese))
|
|
7 Feraren P, Jensen HM. Cohesive zone modelling of interface fracture near flaws in adhesive joints. Engineering Fracture Mechanics, 2004, 71:2125-2142
|
|
8 Park K, Paulino GH, Roesler JR. Determination of the kink point in the bilinear softening model for concrete. Engineering Fracture Mechanics, 2008, 75:3806-3818
|
|
9 张军,张永祥,杨军.环氧树脂胶湿热与室温环境下的蠕变行为研究.机械强度,2014,36(6):35-41(Zhang Jun, Zhang Yongxiang, Yang Jun. Investigation on Epoxy Creep Behavior at Ambient and Hydrothermal Environment. Journal of Mechanical Strength, 2015, 37(6):237-242(in Chinese))
|
|
10 张军,王增威,杨军等.环氧树脂胶对接结构的疲劳试验与理论研究.中国胶粘剂,2014, 23(9):17-21(Zhang Jun,Wang Zengwei, Yang Jun, et al. Fatigue experiment and theoretical investigation on epoxy resin adhesive butt joint. China Adhesives, 2014, 23(9):17-21(in Chinese))
|
|
11 Needleman A. A continuum model for void nucleation by inclusion debonding. Journal of Applied Mechanics, 1987, 54:525-531
|
|
12 Tvergaard V, Hutchinson JW. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. Journal of Mechanics and Physics of Solids, 1992, 40:1377-1397
|
|
13 Camacho GT, Ortiz M. Computational modeling of impact damage in brittle materials. International Journal of Solids and Structures, 1996, 33:2899-2938
|
|
14 Geubelle PH, Baylor J. Impact-induced delamination of laminated composites:a 2D simulation. Composites Part B:Engineering, 1998, 29:589-602
|
|
15 Alfano M, Furgiuele F, Leonardi A, et al. Mode I fracture of adhesive joints using tailored cohesive zone models. International Journal of Fracture, 2009, 157:193-204
|
|
16 Martiny PH, Lani F, Kinloch AJ, et al. A maximum stress at a distance criterion for the prediction of crack propagation in adhesivelybonded joints. Engineering Fracture Mechanics, 2013, 97:105-135
|
|
17 Jhin G, Azari S, Ameli A, et al. Crack growth rate and crack path in adhesively bonded joints:Comparison of creep fatigue and fracture. International Journal of Adhesion and Adhesives, 2013, 46:74-84
|
|
18 张军.界面应力及内聚力模型在界面力学的应用.郑州:郑州大学出版社,2011(Zhang Jun. Application of Interface Stress and Cohesive Zone Model in Interface Mechanics. Zhengzhou:Zhengzhou University Press, 2011(in Chinese))
|
|
19 Liljedhal CDM, Crocombe AD, Wahab MA. Damage modeling of adhesively bonded joints. International Journal of Fracture, 2006, 141:147-161
|
|
20 Chen CC, Linzell DG. Modeling end notched flexure tests to establish cohesive element mode Ⅱ fracture parameters. Engineering Fracture Mechanics, 2010, 77:1338-1347
|
|
21 李伟东,吴坤岳,胡平.周期激励下单搭接接头强度与振动特性研究.计算力学学报,2014,31(4):446-452(LiWeidong,Wu Kunyue, Hu Ping. Study on strength and fatigue behavior of single lap joint under periodic excitation. Chinese Journal of Computational Mechanics, 2014, 31(4):446-452(in Chinese))
|
|
22 张盼,许英杰,汪海滨等.基于粘弹性本构模型的双搭接胶结接头应力分析.应用数学和力学,2015,2(36):160-166(Zhang Pan, Xu Yingjie, Wang Haibin, et al. Stress analyses of double lap bonding joint using viscoelastic constitutive model. Applied Mathematics and Mechanics, 2015, 36(2):160-166(in Chinese))
|
|
23 XuW,Wei Y. Strength analysis of metallic bonded joints containing Defects. Computational Materials Science, 2012, 53:444-450
|
|
24 Blackman BRK, Hadavinia H, Kinloch AJ, et al. The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints. International Journal of Fracture, 2003, 119:25-46
|
|
25 Yan Y, Shang F. Cohesive zone modeling of interfacial delamination in PZT thin films. International Journal of Solids and Structures, 2009, 46:2739-2749
|
|
26 Lorena M, Fern C, Sonia S. Influence of the cohesive law shape on the composite adhesively-bonded patch repair behavior. Composites Part B, 2016, 91:414-421
|
|
27 Cui H. Simulation of ductile adhesive failure with experimentally determined cohesive law. Composites Part B, 2016, Accepted Manuscript
|
|
28 Jousset P, Rachik M. Comparison and evaluation of two types of cohesive zone models for the finite element analysis of fracture propagation in industrial bonded structures. Engineering Fracture Mechanics, 2014, 132:48-69
|
|
29 Campilho RDSG, Banea MD, Neto JABP, et al. Modelling adhesive joints with cohesive zone models:effect of the cohesive law shape of the adhesive layer. International Journal of Adhesion & Adhesives, 2013, 44:48-56
|
|
30 Campilho RDSG, Fernandes TAB. Comparative evaluation of single-lap joints bonded with different adhesives by cohesive zone modellin. Procedia Engineering, 2015, 114:102-109
|
|
31 Arcan L, Arcan M, Daniel L. SEM fractography of pure and mixed mode Interlaminar fracture in graphite/epoxy composites. In:Masters JE and Au JJ eds. Fractography of Modern Engineering Materials:Composites and Metals, ASTM Technology Publish, Philadelphia, 1987
|
|
32 Arnaud N, Créacohcadec R, Cognard JY. A tension/compressiontorsion test suited to analyze the mechanical behavior of adhesives under non-proportional loadings. International Journal of Adhesion & Adhesives, 2014, 53:3-14
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: