STUDY ON CONSTITUENT PROPERTIES OF A 2D-SiC/SiC COMPOSITE BY HYSTERESIS MEASURMENTS

Guo Hongbao; Jia Purong; Wang Bo; Jiao Guiqiong; Zeng Zeng

doi:10.6052/0459-1879-14-247

Volume 47 Issue 2

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Theoretical and Applied Mechanics > 2015 > 47(2): 260-269. > DOI: 10.6052/0459-1879-14-247 CSTR: 32045.14.0459-1879-14-247

Guo Hongbao, Jia Purong, Wang Bo, Jiao Guiqiong, Zeng Zeng. STUDY ON CONSTITUENT PROPERTIES OF A 2D-SiC/SiC COMPOSITE BY HYSTERESIS MEASURMENTS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(2): 260-269. DOI: 10.6052/0459-1879-14-247

Citation:

PDF (2971 KB)

STUDY ON CONSTITUENT PROPERTIES OF A 2D-SiC/SiC COMPOSITE BY HYSTERESIS MEASURMENTS

1.
School of Mechanics and Civil & Architecture, Northwestern Polytechnical University, Xi'an 710129, China
2. Chengdu Aircraft Design and Research Institute, Chengdu 610091, China

Received Date: August 22, 2014
Revised Date: January 07, 2015

Graphical Abstract

Abstract

Abstract

Continuous fiber reinforced ceramic matrix composites (CMCs) have outstanding mechanical properties. It is considered as a potential refractory material applied in aerospace fields. Study on CMCs' constituent properties has significant importance to the design, manufacture and engineering applications. In this paper, a method was prepared for assessing constituent properties of composites from hysteresis loops. The method is straightforward experimentally and provides values of constituent parameters directly. In detail, a hysteresis model in one dimension was constructed by shear-lag theory. The diverse effects of long and short matrix fragments on hysteresis behaviors were studied. And the hysteresis behaviors of a 2D-SiC/SiC composite were gained from tensile test. Considering the actual process of matrix cracking, all SiC matrixs was assumed to crack into long fragment. Values of four constituent parameters were calculated out: matrix cracking stress as 90MPa, residual stress as 19MPa, interfacial debond energy as 3.1 J/m² and sliding stress as 74MPa. Considering the influence of the few short fragments, the accuracy of calculations is analyzed. The calculations show a good dispersion and characterize the mechanical properties of 2D-SiC/SiC composites well.
- 2D-SiC/SiC composites,
- hysteresis behavior,
- shear-lag theory,
- hysteresis model,
- constituent properties

FullText(HTML)

References (14)

References

Zhu S, Mizuno M, Kagawa Y, et al. Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: A review. Composites Science and Technology, 1999, 59: 833-851

杨成鹏. 陶瓷基复合材料的力学特性和氧化损伤模拟研究. [博士论文]. 西安: 西北工业大学, 2011 (Yang Chengpeng. Mechanical characterization and oxidation damage modeling of ceramic matrix composites. [PhD Thesis]. Xi'an: Northwestern Polytechnical University, 2011 (in Chinese))

Vagaggini E, Domergue JM, Evans AG. Relationship between hysteresis measurements and the constituent properties of ceramic matrix composites: I, Theory. J Am Ceram Soc , 1995, 78(10): 2709-2720

Domergue JM, Vagaggini E, Evans AG. Relationship between hysteresis measurements and the constituent properties of ceramic matrix composites: II, Experimental studies on unidirectional materials. J. Am. Ceram. Soc., 1995, 78(10): 2721-2731

Domergue JM, Heredia FE, Evans AG. Hysteresis loops and the inelastic deformation of 0/90 ceramic matrix composites. J Am Ceram Soc , 1996, 79(1): 161-170

Ahn BK, Curtin WA. Strain and hysteresis by stochastic matrix cracking in ceramic matrix composites. J Mech Phys Solids, 1996, 45(2): 177-209

Li LB, Song YD. An approach to estimate interface shear stress of ceramic matrix composites from hysteresis loop. Applied Composite Materials, 2010, 17: 309-328

Wang YQ, Zhang LT, Cheng LF, et al. Characterization of tensile behavior of a two-dimensional woven carbon/silicon carbide composite fabricated by chemical vapor infiltration. Material Science and Engineering A, 2008, 497: 295-300

杨成鹏, 矫桂琼, 王波.2D-C/SiC复合材料的单轴拉伸力学行为及其强度. 力学学报, 2011, 43(2): 330-337 (Yang Chengpeng, Jiao Guiqiong, Wang Bo.Uniaxial tensile stress-strain behavior and strength of plain woven C/SiC composite.Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(2): 330-337 (in Chinese))

Evans AG, Zok FW. The physics and mechanics of fiber-reinforced brittle matrix composites. Journal of Materials Science, 1994, 29: 3857-3896

Hutchinson JW, Jensen HM. Models of fiber debonding and pullout in brittle composites with friction. Mechanics of Materials, 1990, 9: 139-163

李崇俊. SiC/SiC复合材料及其应用. 高科技纤维与应用, 2013, 38(3): 1-7 (Li Chongjun. SiC/SiC composites and application.Hi-Tech Fiber & Application, 2013, 38(3): 1-7 (in Chinese))

Solti JP, Mall S, Robertson DD. Modeling damage in unidirectional ceramic-matrix composites. Composites Science and Technology, 1995, 54(1): 55-66

李潘, 王波, 甄文强等.2D-SiC/SiC复合材料拉伸加卸载行为. 复合材料学报, 2014, 31(3): 676-682 (Li Pan, Wang Bo, Zhen Wenqiang, et al.Tensile loading/unloading stress-strain behavior of 2D-SiC/SiC composites.Acta Materiae Composites Sinica, 2014, 31(3): 676-682 (in Chinese))

[1]	Ling Shengbo, Yao Qi, Wang Lepeng, Mei Jie, Wu Zhen. INFLUENCE OF WRINKLE ON THE TENSILE PROPERTIES OF COMPOSITE LAMINATES: EXPERIMENTS AND NUMERICAL MODEL[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(6): 1740-1751. DOI: 10.6052/0459-1879-23-578
[2]	Wang Yunjiang, Wei Dan, Han Dong, Yang Jie, Jiang Mingqiang, Dai Lanhong. DOES STRUCTURE DETERMINE PROPERTY IN AMORPHOUS SOLIDS?[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(2): 303-317. DOI: 10.6052/0459-1879-19-368
[3]	Li Longbiao. INVESTIGATION ON FATIGUE HYSTERESIS LOOPS MODELS OF FIBRE-REINFORCED CERAMIC-MATRIX COMPOSITES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(5): 710-729. DOI: 10.6052/0459-1879-13-332
[4]	Liu Zhongbo, Fang Kezhaoy, Sun Zhaocheny. ON SHOALING PROPERTY OF A SET OFFOURTH DISPERSIVE BOUSSINESQ MODEL[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(4): 512-518. DOI: 10.6052/0459-1879-13-414
[5]	Shen Haojie, Yao Weixing, Wu Fuqiang. SYNERGISTIC DAMAGE MECHANIC MODEL FOR STIFFNESS PROPERTIES OF COMPOSITE LAMINATES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(2): 255-263. DOI: 10.6052/0459-1879-13-255
[6]	Zhiyong Ai, Chao Wu. Plane strain consolidation of a multi-layered soil with anisotrpic permeability and compressible constituents[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(5): 801-807. DOI: 10.6052/0459-1879-2009-5-2008-477
[7]	Weihong Zhang, Gaoming Dai, Fengwen Wang, Shiping Sun, Hicham Bassir. Topology optimization of material microstructures using strain energy-based prediction of effective elastic properties[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(1): 77-89. DOI: 10.6052/0459-1879-2007-1-2006-086
[8]	Z.Y. Gao, Tongxi Yu, D. Karagiozova. Finite element simulation on the mechanical properties of MHS materials[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(1): 65-75. DOI: 10.6052/0459-1879-2007-1-2006-198
[9]	Zhenhua Huang, M.S. Ghidaoui. A model for the scattering of long waves by slotted breakwaters in the presence of currents[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(1): 1-9. DOI: 10.6052/0459-1879-2007-1-2006-240
[10]	基于变形动力学模型的黏弹性材料本构关系[J]. Chinese Journal of Theoretical and Applied Mechanics, 1993, 25(3): 375-379. DOI: 10.6052/0459-1879-1993-3-1995-655

Cited By

Cited by

Periodical cited type(16)

1.	畅博彦，韩芳孝，周杨，关鑫. 精梳机钳板机构接触碰撞动力学建模与仿真. 纺织学报. 2025(01): 179-186 .
2.	张宏伟，罗忠，许春阳，常晶，姚思博. 静叶调节机构间隙转动关节接触力模型及实验. 机械工程学报. 2025(01): 1-12 .
3.	李晓，方世航，冯东民，李自娟，赵海洋. 基于堆积角的烟丝离散元仿真参数标定. 烟草科技. 2025(02): 83-90 .
4.	王宏伟，单志航，张立鑫，吴相朝，李明杰. 冷镦机棘爪部件的材料选取与性能分析. 锻压技术. 2024(01): 182-188+201 .
5.	畅博彦，韩芳孝，周杨，金国光. 面向精梳任务的高速变胞机构冲击动力学研究. 机械工程学报. 2024(07): 54-65 .
6.	宋宁宁，赵剑，公爵，李琳辉，彭海军. 车辆在非光滑路面的接触动力学分析方法研究. 力学学报. 2024(06): 1762-1774 . 本站查看
7.	刘洋. 五轴联动机床主运动构件重复碰撞瞬态动力学特性分析. 机床与液压. 2024(11): 226-230 .
8.	吴志刚，蒋建平，邬树楠，李庆军，王兴，谭述君，邓子辰. 航天结构空间组装动力学与控制研究进展. 力学进展. 2024(02): 344-390 .
9.	丁宁，张钧鑫. 新型起重永磁铁活动单元体冲击动力学研究. 长春大学学报. 2024(06): 18-24 .
10.	张西南，游浦，刘铸永. 基于符号距离场的多体系统碰撞动力学研究. 力学学报. 2024(09): 2703-2712 . 本站查看
11.	高建卓，陈龙，汪宁溪，骆昕. 弹簧冲击器溯源过程中的碰撞接触力特性研究. 计量学报. 2024(10): 1520-1524 .
12.	彭静，罗灿，马佳，黎科先，黄著. 基于遗传算法的身管-弹丸接触碰撞网络模型优化研究. 力学学报. 2024(10): 2974-2986 . 本站查看
13.	王兴东，柯蕃，孔建益，吴宗武. 低耗稳定的四间隙平面连杆多目标优化设计. 组合机床与自动化加工技术. 2024(12): 30-34+40 .
14.	张冰肖，王博洋，刘铸永，刘璟龙，时军委. 对接机构动力学建模与电子差动捕获缓冲研究. 宇航学报. 2024(12): 1910-1921 .
15.	马佳，揭豪，白梦昊，彭静，陈辉，陈得良. 基于无量纲分析的法向恢复系数模型研究. 力学学报. 2023(04): 982-990 . 本站查看
16.	梁伟华，朱赫，尹乔之，周乐，魏小辉，聂宏. 基于自适应起落架的旋翼飞行器着陆稳定性分析. 航空计算技术. 2023(04): 38-41 .

Other cited types(14)

Get Citation

PDF

XML

Article Metrics

Article views (1217) PDF downloads (826) Cited by(30)

STUDY ON CONSTITUENT PROPERTIES OF A 2D-SiC/SiC COMPOSITE BY HYSTERESIS MEASURMENTS