Citation: | Qu Jie, Qin Wei, Jin Quanlin. STUDY ON THE PARAMETER VALUE DOMAIN OF MACRO-MICRO CONSTITUTIVE MODEL[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(6): 920-930. doi: 10.6052/0459-1879-14-049 |
Momenia A, Ebrahimib GR, Jahazic M, et al. Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size. Journal of Alloys and Compounds, 2014, 587(2): 199-210
|
Nie LF, Zhang LW, Zhu Z, et al. Constitutive modeling of dynamic recrystallization kinetics and processing maps of solution and aging FGH96 superalloy. Journal of Materials Engineering and Erformance, 2013, 22(12): 3728-3734
|
Li HW, Wu Ch, Yang H. Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing. International Journal of Plasticity, 2013, 51(11): 271-291
|
金泉林. 一个新的动态再结晶过程的分析模型. 塑性工程学报,1994, 1(1): 3-14 (Jin Quanlin. A new dynamic recrystallization analytical model. Journal of Plasticity Engineering, 1994, 1(1): 3-14 (in Chinese))
|
Qu J, Jin QL, Xu BY. Some improvements in visco-plastic model considering dynamic recrystallization. Acta Mechanica Sinca, 2004, 20 (5): 499-506
|
Qu J, Jin QL, Xu BY. Parameter identification for improved viscoplastic model considering dynamic recrystallization. International Journal of Plasticity, 2005, 21 (7): 1267-1302
|
曲杰. 宏微观耦合本构模型参数参数识别面临的困境.见: 刘应华, 刘凯欣, 宁建国编. 塑性力学新进展——2011年全国塑性力学会议论文集. 北京:清华大学出版社, 2011: 150-155 (Qu Jie. Parameter identification challenges in Macro-micro coupled constitutive model. In: Liu Yinghua, Liu Kaixin, Ning Jianguo eds. Advances in Plastic Mechanics—2011 China Plastic Mechanics Conference Proceeding. Beijing: Tsinghua University Press, 2011: 150-155 (in Chinese))
|
Mahnken R, Stein E. Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations. International Journal of Plasticity, 1996, 12: 451-479
|
Tanake K, Nakamura T, Hosida Y, et al. Determination of the constants in the Zener-Hollomon hyperbolic equation for high temperature deformation. Res Mechanica, 1984, 12(1): 41-57
|
Cingara A, Mcqueen HJ. New method for determining sinh constitutive constants for high temperature of 300 austenitic. Journal of Materials Processing Technology, 1992, 36: 17-12
|
魏海莲,刘国权,肖翔等. 表观的和基于物理的35Mn2钢奥氏体热变形本构分析. 金属学报,2013,49(6):731-738 (Wei Hailian, Liu Guoquan, Xiao Xiang, et al. Apparent and physically based constitutive analysis for hot deformation of austenite in 35Mn2 steel. Acta Metallurgica Sinca, 2013, 49(6): 731-738 (in Chinese))
|
Morris C. Self-diffusion during plastic deformation. Materials transactions, JIM, 1970, 11: 145-151
|
Press WH, Flannery BP, Teukolsky SA, et al. Numerical Recipes Source Code: The Art of Scientific Computing(3rd). UK, Cambridge: Cambridge University Press, 2007
|
Mcqueen J, Ryan ND. Constitutive analysis in hot working. Materials Science and Engineering A, 2002, 322: 43-63
|
余永宁, 刘国权. 体视学——组织定量分析的原理和应用. 北京:冶金工业出版社,1989 (Yu Yongning, Liu Guoquan. Stereology—Metallographical Quantitative Analysis Theory and Its Application. Beijing: Metallurgical Industry Press, 1989 (in Chinese))
|
宋余九. 金属的晶界与强度. 西安:西安交通大学出版社, 1987 (Song Yujiu. Metal Grain Boundary and Its Strength. Xian: Xian Jiaotong University Press, 1987 (in Chinese))
|
Heverlee PD. An algorithm for cubic spline fitting with convexity constraints. Computing, 1980, 24: 349-371
|
Jonas JJ, Quelennec X, Jiang L, et al. The Avrami kinetics of dynamic recrystallization. Acta Materialia, 2009, 57: 2748-2756
|
Yanagida A, Liu JSh, Yanagimoto J. Flow curve determination for metal under dynamic recrystallization using inverse analysis. Materials Transactions, 2003, 44(11): 2303-2310
|
Bum B, Reichert P, Kuhni M. Practical identifiability analysis of large environmental simulation models. Water Resources Research, 2001, 37 (4): 1015-1030
|
Bum B, KÜhni M, Siegrist H, et al. Practical identifiability of ASM2d parameters-systematic selection and tuning of parameter sunsets. Water Research, 2002, 36: 4113-4127
|
Ryan ND, McQueen HJ. Comparison of dynamic softening in 301, 304, 316 and 317 stainless steels. High Temperature Technology, 1990, 8(3): 185-200
|
Roberts W, Ahlblom B. A nucleation criterion for dynamic recrystallization during hot working. Acta Metallurgica, 1979, 26: 801-813
|
Sandström R, Lagneborg R. A model for hot working occurring by recrystallization. Acta Metallurgica,1975, 23: 387-398
|
OriginLab Corporation. Origin 8 User Guide. 2007.
|