A METHOD FOR COMPUTING THE EFFECTIVE IN-PLAN THERMOELASTIC PROPERTIES OF PERIODIC COMPOSITES BASED ON THE RADIAL INTEGRATION BOUNDARY ELEMENT METHOD

Liu Huayu; Zheng Yongtong; Peng Haifeng; Gao Xiaowei; Yang Kai

doi:10.6052/0459-1879-24-044

Volume 56 Issue 8

Aug. 2024

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Theoretical and Applied Mechanics > 2024 > 56(8): 2294-2303. > DOI: 10.6052/0459-1879-24-044 CSTR: 32045.14.0459-1879-24-044

Liu Huayu, Zheng Yongtong, Peng Haifeng, Gao Xiaowei, Yang Kai. A method for computing the effective in-plan thermoelastic properties of periodic composites based on the radial integration boundary element method. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(8): 2294-2303. DOI: 10.6052/0459-1879-24-044

Citation:

PDF (5509 KB)

A METHOD FOR COMPUTING THE EFFECTIVE IN-PLAN THERMOELASTIC PROPERTIES OF PERIODIC COMPOSITES BASED ON THE RADIAL INTEGRATION BOUNDARY ELEMENT METHOD

*.
School of Mechanics and Aerospace Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
†.
School of Infrastructure Engineering, Nanchang University, Nanchang 330031, China

Received Date: January 17, 2024
Accepted Date: June 11, 2024
Available Online: June 11, 2024
Published Date: June 12, 2024

Graphical Abstract

Abstract

Abstract

One can program not only the elastic modulus and Poisson’s ratio but also the thermal expansion coefficients of the composites which consist of artificial microstructures and multiple materials. The macro effective thermoelastic properties of the composites are determined by their microstructures. In this paper, the authors proposed a novel method to evaluate the homogenized in-plan thermoelastic properties of the composites made of the periodic microstructures, which is based on the radial integration boundary element method. The proposed method employs the representative volume elements homogenized approach to calculate the effective properties based on the displacements and stresses of the micro unit cells, while utilizing the radial integral boundary element method for solving the displacements and stresses. The proposed method does not require internal grid and domain integration, and it only relies on the displacements and surface tractions on the boundary to obtain the effective thermoelastic parameters of materials, such as elastic modulus and thermal expansion coefficients. This method has advantages such as easy implementation of parameterized modeling, which leads to priorities in structure optimization. Besides, using the boundary element method makes it easy to analyze accurately the cells with tiny structural features. What’s more, the discontinuous elements are employed at the conners of structures in this paper to simplify the implementation of the periodic boundary conditions of the representative volume elements. The authors simulated the banding problem of a composite beam using both the homogenized thermoelastic properties and the direct finite element simulation. The results of the homogenized model coincide the direct simulation well, which indicates the effectiveness of the proposed method. Using the proposed method, the authors also conducted the parametric analysis of the coefficients of thermal expansion of a cellular microstructure. The results show that one can achieve the negative thermal expansion by changing the sizes of the cellular structure’s components.
- boundary element method,
- thermoelasticity,
- negative thermal expansion,
- homogenization method,
- representative volume element

FullText(HTML)

References (37)

References

[1]	薛明德, 向志海. 大型空间结构热-动力学耦合分析方法综述. 力学学报, 2022, 54(9): 2361-2376 (Xue Mingde, Xiang Zhihai. Review of thermal-dynamical analysis methods for large space structures. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(9): 2361-2376 (in Chinese) doi: 10.6052/0459-1879-22-171 Xue Mingde, Xiang Zhihai. Review of thermal-dynamical analysis methods for large space structures. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(9): 2361-2376 (in Chinese) doi: 10.6052/0459-1879-22-171
[2]	Fan LJ, Xiang ZH. Suppressing the thermally induced vibration of large-scale space structures via structural optimization. Journal of Thermal Stresses, 2015, 38(1): 1-21 doi: 10.1080/01495739.2014.950529
[3]	Yuan X, Xiang Z. A thermal-flutter criterion for an open thin-walled circular cantilever beam subject to solar heating. Chinese Journal of Aeronautics, 2018, 31(9): 1902-1909 doi: 10.1016/j.cja.2018.07.002
[4]	Askari M, Hutchins DA, Thomas PJ, et al. Additive manufacturing of metamaterials: A review. Additive Manufacturing, 2020, 36: 101562 doi: 10.1016/j.addma.2020.101562
[5]	Abdulhameed O, Al-Ahmari A, Ameen W, et al. Additive manufacturing: Challenges, trends, and applications. Advances in Mechanical Engineering, 2019, 11(2): 1-27
[6]	Lim TC. Composite metamaterial with sign-switchable coefficients of hygroscopic, thermal and pressure expansions. Advanced Composites and Hybrid Materials, 2019, 2(4): 657-669 doi: 10.1007/s42114-019-00118-3
[7]	Yu C, Lin K, Jiang S, et al. Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite. Nature Communications, 2021, 12: 4701 doi: 10.1038/s41467-021-25036-1
[8]	Chen J, Gao Q, Sanson A, et al. Tunable thermal expansion in framework materials through redox intercalation. Nature Communications, 2017, 8: 14441 doi: 10.1038/ncomms14441
[9]	Prall D, Lakes RS. Properties of a chiral honeycomb with a Poisson’s ratio of — 1. International Journal of Mechanical Sciences, 1997, 39(3): 305-314
[10]	Yang L, Harrysson O, West H, et al. Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. International Journal of Solids and Structures, 2015, 69-70: 475-490 doi: 10.1016/j.ijsolstr.2015.05.005
[11]	Wang Y, Wang L, Ma ZD, et al. Parametric analysis of a cylindrical negative Poisson’s ratio structure. Smart Materials and Structures, 2016, 25(3): 035038 doi: 10.1088/0964-1726/25/3/035038
[12]	Yu B, Xu Z, Mu R, et al. Design of large-scale space lattice structure with near-zero thermal expansion metamaterials. Aerospace, 2023, 10(3): 294 doi: 10.3390/aerospace10030294
[13]	Liu HY, Zheng YT, Gao XW, et al. The inverse design of auxetics using the boundary element method and the constrained conjugate gradient method. Engineering Analysis with Boundary Elements, 2024, 162: 17-27 doi: 10.1016/j.enganabound.2024.01.029
[14]	Hollister SJ, Kikuchi N. A comparison of homogenization and standard mechanics analyses for periodic porous composites. Computational Mechanics, 1992, 10(2): 73-95 doi: 10.1007/BF00369853
[15]	Gao YH, Xing YF. The multiscale asymptotic expansion method for three-dimensional static analyses of periodical composite structures. Composite Structures, 2017, 177: 187-195 doi: 10.1016/j.compstruct.2017.06.063
[16]	Wang Y, Ye J, Liu L, et al. Evaluation the interface damage influences on mechanical properties of fiber-reinforced composites based on subdomain boundary element theory. Mechanics of Advanced Materials and Structures, 2023, 30(20): 4264-4279 doi: 10.1080/15376494.2022.2092793
[17]	Yazdanparast R, Rafiee R. Determining in-plane material properties of square core cellular materials using computational homogenization technique. Engineering with Computers, 2023, 39(1): 373-386 doi: 10.1007/s00366-021-01562-w
[18]	Lim TC. Anisotropic and negative thermal expansion behavior in a cellular microstructure. Journal of Materials Science, 2005, 40(12): 3275-3277 doi: 10.1007/s10853-005-2700-6
[19]	Hassanzadeh-Aghdam MK, Ansari R, Darvizeh A. Micromechanical modeling of thermal expansion coefficients for unidirectional glass fiber-reinforced polyimide composites containing silica nanoparticles. Composites Part A: Applied Science and Manufacturing, 2017, 96: 110-121 doi: 10.1016/j.compositesa.2017.02.015
[20]	Tian W, Qi L. Unified periodic boundary condition for homogenizing the thermo-mechanical properties of composites. Applied Mathematical Modelling, 2023, 121: 252-269 doi: 10.1016/j.apm.2023.04.024
[21]	Tian W, Qi L, Chao X, et al. Periodic boundary condition and its numerical implementation algorithm for the evaluation of effective mechanical properties of the composites with complicated micro-structures. Composites Part B: Engineering, 2019, 162: 1-10 doi: 10.1016/j.compositesb.2018.10.053
[22]	谷金良. B样条边界面法及边界积分方程中的等几何方法研究. [博士论文]. 长沙: 湖南大学, 2013 (Gu Jinliang. Research of the B-spline boundary face method and the isogeometric analysis in the boundary integral equation. [PhD Thesis]. Changsha: Hunan University, 2012 (in Chinese) Gu Jinliang. Research of the B-spline boundary face method and the isogeometric analysis in the boundary integral equation. [PhD Thesis]. Changsha: Hunan University, 2012 (in Chinese)
[23]	高效伟, 刘健, 彭海峰. 集成单元边界元法及其在主动冷却热防护系统分析中的应用. 力学学报, 2016, 48(4): 994-1003 (Gao Xiaowei, Liu Jian, Peng Haifeng. Integrated unit BEM and its application in analysis of actively cooling TPS. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(4): 994-1003 (in Chinese) doi: 10.6052/0459-1879-15-437 Gao Xiaowei, Liu Jian, Peng Haifeng. Integrated unit BEM and its application in analysis of actively cooling TPS. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(4): 994-1003 (in Chinese) doi: 10.6052/0459-1879-15-437
[24]	郑昌军, 高海峰, 杜磊等. 边界元特征值分析及Burton-Miller法探究. 计算力学学报, 2016, 33(3): 335-342 (Zheng Changjun, Gao Haifeng, Du Lei, et al. BEM eigenvalue analysis and the investigation of the Burton-Miller method. Chinese Journal of Computational Mechanics, 2016, 33(3): 335-342 (in Chinese) Zheng Changjun, Gao Haifeng, Du Lei, et al. BEM eigenvalue analysis and the investigation of the Burton-Miller method. Chinese Journal of Computational Mechanics, 2016, 33(3): 335-342 (in Chinese)
[25]	余志强, 刘强, 郑昌军. 三维声学特征频率灵敏度分析的边界元法. 计算力学学报, 2023, 40(4): 634-640 (Yu Zhiqiang, Liu Qiang, Zheng Changjun. A boundary element method for the eigenfrequency sensitivity analysis of three-dimensional acoustic problems. Chinese Journal of Computational Mechanics, 2023, (4): 634-640 (in Chinese) Yu Zhiqiang, Liu Qiang, Zheng Changjun. A boundary element method for the eigenfrequency sensitivity analysis of three-dimensional acoustic problems. Chinese Journal of Computational Mechanics, 2023, (4): 634-640 (in Chinese)
[26]	Zhang SQ, Xu BB, Gao ZH, et al. Topology optimization of heat transfer and elastic problems based on element differential method. Engineering Analysis with Boundary Elements, 2023, 149: 190-202 doi: 10.1016/j.enganabound.2023.01.026
[27]	Zhang W, Jiang Q, Feng W, et al. Explicit structural topology optimization using boundary element method-based moving morphable void approach. International Journal for Numerical Methods in Engineering, 2021, 122(21): 6155-6179 doi: 10.1002/nme.6786
[28]	Fernandes GR, Crozariol LHR, Furtado AS, et al. A 2D boundary element formulation to model the constitutive behavior of heterogeneous microstructures considering dissipative phenomena. Engineering Analysis with Boundary Elements, 2019, 99: 1-22 doi: 10.1016/j.enganabound.2018.10.018
[29]	Lo Cascio M, Milazzo A, Benedetti I. A hybrid virtual–boundary element formulation for heterogeneous materials. International Journal of Mechanical Sciences, 2021, 199: 106404 doi: 10.1016/j.ijmecsci.2021.106404
[30]	Yazdanparast R, Rafiee R. Developing a homogenization approach for estimation of in-plan effective elastic moduli of hexagonal honeycombs. Engineering Analysis with Boundary Elements, 2020, 117: 202-211 doi: 10.1016/j.enganabound.2020.04.012
[31]	Gao XW. Boundary element analysis in thermoelasticity with and without internal cells. International Journal for Numerical Methods in Engineering, 2003, 57(7): 975-990 doi: 10.1002/nme.715
[32]	陈豪龙, 周焕林, 余波. 瞬态热传导问题的精细积分-双重互易边界元法. 应用力学学报, 2017, 34(5): 835-841 (Chen Haolong, Zhou Huanlin, Yu Bo. Precise integration DRBEM for solving transient heat conduction problems. Chinese Journal of Applied Mechanics, 2017, 34(5): 835-841 (in Chinese) Chen Haolong, Zhou Huanlin, Yu Bo. Precise integration DRBEM for solving transient heat conduction problems. Chinese Journal of Applied Mechanics, 2017, 34(5): 835-841 (in Chinese)
[33]	Yang K, Wang J, Du JM, et al. Radial integration boundary element method for nonlinear heat conduction problems with temperature-dependent conductivity. International Journal of Heat and Mass Transfer, 2017, 104: 1145-1151 doi: 10.1016/j.ijheatmasstransfer.2016.09.015
[34]	高效伟, 杨恺. 功能梯度材料结构的热应力边界元分析. 力学学报, 2011, 43(1): 136-143 (Gao Xiaowei Yang Kai. Thermal stress analysis of functionally graded material structures using boundary element method. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(1): 136-143 (in Chinese) doi: 10.6052/0459-1879-2011-1-lxxb2009-585 Gao Xiaowei Yang Kai. Thermal stress analysis of functionally graded material structures using boundary element method. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(1): 136-143 (in Chinese) doi: 10.6052/0459-1879-2011-1-lxxb2009-585
[35]	Hori M, Nemat-Nasser S. On two micromechanics theories for determining micro–macro relations in heterogeneous solids. Mechanics of Materials, 1999, 31(10): 667-682 doi: 10.1016/S0167-6636(99)00020-4
[36]	Xia Z, Zhang Y, Ellyin F. A unified periodical boundary conditions for representative volume elements of composites and applications. International Journal of Solids and Structures, 2003, 40(8): 1907-1921 doi: 10.1016/S0020-7683(03)00024-6
[37]	Zheng YT, Liu Y, Gao XW, et al. Improved hole and tube elements in BEM for elasticity problems. Engineering Analysis with Boundary Elements, 2024, 159: 17-35 doi: 10.1016/j.enganabound.2023.11.021

[1]	Bai Xiaowei, Zhao Luyang, Li Liang, Luo Lilong, Yang Jie, Hu Heng. COMPARATIVE STUDY ON TWO TYPES OF DATA-DRIVEN COMPUTATIONAL HOMOGENIZATION METHODS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(7): 1931-1942. DOI: 10.6052/0459-1879-23-641
[2]	Tian Wenlong, Qi Lehua, Chao Xujiang. AN EFFICIENT FE COMPRESSION METHOD FOR GENERATING THE RVES OF COMPOSITES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(7): 1537-1547. DOI: 10.6052/0459-1879-23-061
[3]	Liu Shuo, Fang Guodong, Wang Bing, Fu Maoqing, Liang Jun. STUDY OF THERMAL CONDUCTION PROBLEM USING COUPLED PERIDYNAMICS AND FINITE ELEMENT METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(2): 339-348. DOI: 10.6052/0459-1879-17-332
[4]	Rong Junjie, Xiao Jinyou, Wen Lihua. A HIGH ORDER KERNEL INDEPENDENT FAST MULTIPOLE BOUNDARY ELEMENT METHOD FOR ELASTODYNAMICS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(5): 776-785. DOI: 10.6052/0459-1879-13-426
[5]	Shiping Sun, Weihong Zhang, Kepeng Qiu, Zhongze Guo, Bassir Hicham. Integrated topology optimization and scale effect analysis of cyclic symmetry sandwich structures[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(6): 788-795. DOI: 10.6052/0459-1879-2007-6-2006-518
[6]	Weihong Zhang, Gaoming Dai, Fengwen Wang, Shiping Sun, Hicham Bassir. Topology optimization of material microstructures using strain energy-based prediction of effective elastic properties[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 77-89. DOI: 10.6052/0459-1879-2007-1-2006-086
[7]	Z.Y. Gao, Tongxi Yu, D. Karagiozova. Finite element simulation on the mechanical properties of MHS materials[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 65-75. DOI: 10.6052/0459-1879-2007-1-2006-198
[8]	Lixin He, Laiping Zhang, Hanxin Zhang. A finite element/finite volume mixed solver on hybrid grids[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 15-22. DOI: 10.6052/0459-1879-2007-1-2005-604
[9]	INVESTIGATION OF THE STIFFNESS OF TRABECULAE BY REPRESENTATIVE VOLUME ELEMENT (RVE) APPROACH[J]. Chinese Journal of Theoretical and Applied Mechanics, 1997, 29(6): 701-710. DOI: 10.6052/0459-1879-1997-6-1995-287
[10]	HOMOGENIZATION METHOD OF STRESS ANALYSIS OF COMPOSITE STRUCTURES[J]. Chinese Journal of Theoretical and Applied Mechanics, 1997, 29(3): 306-313. DOI: 10.6052/0459-1879-1997-3-1995-230

Cited By

Cited by

Periodical cited type(1)

陈豪龙，唐欣越，王润华，周焕林，柳占立. 基于物理信息神经网络的多介质非线性瞬态热传导问题研究. 力学学报. 2025(01): 89-102 .

本站查看

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views (176) PDF downloads (39) Cited by(1)

A METHOD FOR COMPUTING THE EFFECTIVE IN-PLAN THERMOELASTIC PROPERTIES OF PERIODIC COMPOSITES BASED ON THE RADIAL INTEGRATION BOUNDARY ELEMENT METHOD