EI、Scopus 收录
中文核心期刊
Wu Yuanjun, Xu Xikai, Bao Chen, Cai Lixun. Experimental study on ductile-to-brittle transition of RPV steel considering geometric size. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(10): 2363-2372. DOI: 10.6052/0459-1879-23-264
Citation: Wu Yuanjun, Xu Xikai, Bao Chen, Cai Lixun. Experimental study on ductile-to-brittle transition of RPV steel considering geometric size. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(10): 2363-2372. DOI: 10.6052/0459-1879-23-264

EXPERIMENTAL STUDY ON DUCTILE-TO-BRITTLE TRANSITION OF RPV STEEL CONSIDERING GEOMETRIC SIZE

  • Received Date: June 26, 2023
  • Accepted Date: September 23, 2023
  • Available Online: September 24, 2023
  • Published Date: September 24, 2023
  • Reactor pressure vessel (RPV) is an important safety barrier of nuclear power plant, and the change of fracture toughness of RPV steel in ductile-to-brittle transition zone is an essential consideration in the safety evaluation of nuclear power plant. International standards such as ASTM standard usually recommend the Master Curve method to study the change of fracture toughness of RPV steel in ductile-to-brittle transition zone. The fracture toughness test of SA-508 steel was completed by using single edge-notched bending (SEB) and compact tension (CT) specimens of different sizes in the temperature range from room temperature to −100 °C. The fracture toughness transformation law of SA-508 steel in ductile-to-brittle transition zone was studied based on the Master Curve method, at the same time, the prediction accuracy of ductile-to-brittle transition temperature obtained by the Master Curve method based on the fracture specimens of different sizes is compared, and its failure characteristics were studied by analyzing the micromorphology of the fracture specimens. It is shown that the specimen configuration and geometry have significant influence on ductile-to-brittle transition behavior of RPV steel. The Master Curve method has good accuracy in predicting ductile-to-brittle transition temperature of standard thickness specimens, but the predicted ductile-to-brittle transition temperature of small size specimens is much different from the actual ductile-to-brittle transition zone. With the decrease of temperature, the crack initiation point of both large and small size specimens comes closer to the crack tip and has a nonlinear relationship with the fracture toughness of the specimens.
  • [1]
    王荣山, 翁立奎, 万强茂等. 试样重组技术的可行性研究. 机械强度, 2012, 34(2): 312-316 (Wang Rongshan, Weng Likui, Wan Qiangmao, et al. Feasibility study of specimen reconstitution technology. Journal of Mechanical Strength, 2012, 34(2): 312-316 (in Chinese)

    Wang Rongshan, Weng Likui, Wan Qiangmao, et al. Feasibility study of specimen reconstitution technology. Journal of Mechanical Strength, 2012, 34(02): 312-316(in Chinese))
    [2]
    何广伟, 包陈, 蔡力勋等. COEC微小试样用于延性断裂行为评定的规则化法研究. 机械工程学报, 2017, 53(20): 61-68 (He Guangwei, Bao Chen, Cai Lixun, et al. Normalization method for the evaluation of ductile fracture behavior using small COEC specimen. Journal of Mechanical Engineering, 2017, 53(20): 61-68 (in Chinese) doi: 10.3901/JME.2017.20.061

    He Guangwei, Bao Chen, Cai Lixun, et al. Normalization method for the evaluation of ductile fracture behavior using small COEC specimen. Journal of Mechanical Engineering, 2017, 53(20): 61-68(in Chinese)) doi: 10.3901/JME.2017.20.061
    [3]
    包陈, 蔡力勋, 但晨等. 考虑裂尖约束效应的小尺寸CIET试样延性断裂行为. 机械工程学报, 2017, 53(2): 33-44

    Bao Chen, Cai Lixun, Dan Chen, et al. Ductile fracture behavior of small-sized CIET specimen considering crack front constraint effect. Journal of Mechanical Engineering, 2017, 53(2): 33-44 (in Chinese)
    [4]
    巫元俊, 包陈, 何广伟等. 用于J阻力曲线测试的载荷分离直接标定法. 航空学报, 2017, 38(10): 164-170 (Wu Yuanjun, Bao Chen, He Guangwei, et al. Load separation based direct calibration method for estimating J-resistance curves. Acta Aeronautica et Astronautica Sinica, 2017, 38(10): 164-170 (in Chinese)

    Wu Yuanjun, Bao Chen, He Guangwei, et al. Load separation based direct calibration method for estimating J-resistance curves. Acta Aeronautica et Astronautica Sinica, 2017, 38(10): 164-170(in Chinese))
    [5]
    Tobita T, Nishiyama Y, Onizawa K. Mechanical properties database of reactor pressure vessel steels related to fracture toughness evaluation. JP: Japan Atomic Energy Agency, 2018
    [6]
    He GW, Bao C, Cai LX, et al. Estimation of J-R curves for small-sized COEC specimens and its application considering crack-tip constraints. Acta Mechanica Solida Sinica, 2019, 32(3): 261-276 doi: 10.1007/s10338-019-00089-4
    [7]
    He GW, Bao C, Cai LX, et al. Estimation of J-resistance curves of SA-508 steel from small sized specimens with the correction of crack tip constraint. Engineering Fracture Mechanics, 2018, 200: 125-133 doi: 10.1016/j.engfracmech.2018.07.032
    [8]
    Misawa T, Suzuki K, Saito M, et al. Determination of the minimum quantity of irradiated ferritic steel specimens for small punch DBTT testing. Journal of Nuclear Materials, 1991, 179: 421-424
    [9]
    Kumar P, Dutta BK, Chattopadhyay J. Fracture toughness prediction of reactor grade materials using pre-notched small punch test specimens. Journal of Nuclear Materials, 2017, 495: 351-362 doi: 10.1016/j.jnucmat.2017.08.035
    [10]
    American Society of Mechanical Engineers. ASME boiler and pressure vessel code, section III, subsection G//Annual Book of ASME Standards, US: American Society of Mechanical Engineers, 2001
    [11]
    Wallin K. The scatter in KIC results. Engineering Fracture Mechanics, 1984, 19(6): 1085-1093 doi: 10.1016/0013-7944(84)90153-X
    [12]
    Wallin K. Master Curve Analysis of Ductile to Brittle Transition Region Fracture Toughness Round Robin Data. FL: VTT Publications, 1998: 367
    [13]
    Wallin K. Irradiation damage effects on the fracture toughness transition curve shape for reactor pressure vessel steels. International Journal of Pressure Vessel &Piping, 1993, 55(1): 61-79
    [14]
    Wallin K. The size effect in KIC results. Engineering Fracture Mechanics, 1985, 22(1): 149-163 doi: 10.1016/0013-7944(85)90167-5
    [15]
    Wallin K. Structural integrity assessment aspects of the master curve methodology. Engineering Fracture Mechanics, 2010, 77(2): 285-292 doi: 10.1016/j.engfracmech.2009.02.010
    [16]
    Wallin K. Use of the master curve methodology for real three dimensional cracks. Nuclear Engineering and Design, 2007, 237(12-13): 1388-1394 doi: 10.1016/j.nucengdes.2006.09.034
    [17]
    ASTM E1921-2019. Standard test method for determination of reference temperature, T0, for ferritic steels in the transition range//Annual Book of ASTM Standards. Philadelphia, PA: American Society for Testing and Materials, 2019
    [18]
    曹昱澎. 压力容器用钢在韧脆转变区的断裂韧性预测方法研究. [博士论文]. 上海: 华东理工大学, 2012

    Cao Yupeng. Prediction of fracture toughness in the ductile-to-brittle transition region of pressure vessel steels. [PhD Thesis]. Shanghai: East China University of Science and Technology, 2012 (in Chinese))
    [19]
    Ruggieri C, Savioli RG, Dodds RH. An engineering methodology for constraint corrections of elastic-plastic fracture toughness - partⅡ: Effects of specimen geometry and plastic strain on cleavage fracture predictions. Engineering Fracture Mechanics, 2015, 146: 185-209 doi: 10.1016/j.engfracmech.2015.06.087
    [20]
    Sokolov MA. Development of mini-compact tension test method for determining fracture toughness master curves for reactor pressure vessel steels. US: Oak Ridge National Laboratory, 2017
    [21]
    Zhang YL, Hui H, Zhang JB, et al. Prediction of fracture toughness of SA738GrB steel in the ductile-brittle transition using master curve method and bimodal master curve method. International Journal of Pressure Vessels and Piping, 2020, 182: 104033
    [22]
    Kim J, Park J, Kim M. Estimation of fracture toughness of API 2WGr50 steel in ductile to brittle transition behavior using master curve approach. Journal of Marine Science and Engineering, 2022, 10(8): 1066
    [23]
    Wan Q, Chen L, Pang J, et al. Study on data multiplication of impact toughness by specimen reconstitution technique and master curve. Journal of Failure Analysis and Prevention, 2022, 22(3): 1229-1235 doi: 10.1007/s11668-022-01410-z
    [24]
    张新平, 史耀武. 用小尺寸R-CT试样研究核压力容器钢断裂韧性及与Charpy试样的比较. 核动力工程, 1995, 16(4): 342-347 (Zhang Xinping, Shi Yaowu. Study on fracture toughness of reactor pressure vessel steels by using small size round compact tension specimen and the comparison with charpy-size specimen. Nuclear Power Engineering, 1995, 16(4): 342-347 (in Chinese)

    Zhang Xinping, Shi Yaowu. Study on fracture toughness of reactor pressure vessel steels by using small size round compact tension specimen and the comparison with charpy-size specimen. Nuclear Power Engineering, 1995, 16(4): 342-347(in Chinese))
    [25]
    邓彩艳, 宋蒙蒙, 龚宝明等. 试样厚度对韧脆转变温度区间的影响. 焊接学报, 2018, 39(5): 14-19 (Deng Caiyan, Song Mengmeng, Gong Baoming, et al. Effect of specimen thickness on the shift of the ductile-to-brittle transition curve. Transactions of the China Welding Institution, 2018, 39(5): 14-19 (in Chinese)

    Deng Caiyan, Song Mengmeng, Gong Baoming, et al. Effect of specimen thickness on the shift of the ductile-to-brittle transition curve. Transactions of the China Welding Institution, 2018, 39(05): 14 ~ 19(in Chinese))
    [26]
    林赟, 佟振峰, 宁广胜等. 国产A508-3钢辐照前后小样品断裂韧性测试分析. 核动力工程, 2017, 38(S1): 74-76 (Lin Yun, Tong Zhenfeng, Ning Guangsheng, et al. Fracture toughness of RPV steel using small specimens after neutron irradiation. Nuclear Power Engineering, 2017, 38(S1): 74-76 (in Chinese)

    Lin Yun, Tong Zhenfeng, Ning Guangsheng, et al. Fracture toughness of RPV steel using small specimens after neutron irradiation. Nuclear Power Engineering, 2017, 38(S1): 74 ~ 76(in Chinese))
    [27]
    钟巍华, 佟振峰, 宁广胜等. 辐照用小尺寸样品力学性能表征技术研究进展. 原子能科学技术, 2019, 53(10): 1894-1905 (Zhong Weihua, Tong Zhenfeng, Ning Guangsheng, et al. Research progress in small specimen test technology for mechanical property of irradiated materials. Atomic Energy Science and Technology, 2019, 53(10): 1894-1905 (in Chinese)

    Zhong Weihua, Tong Zhenfeng, Ning Guangsheng, et al. Research progress in small specimen test technology for mechanical property of irradiated materials. Atomic Energy Science and Technology, 2019, 53(10): 1894 ~ 1905(in Chinese))
    [28]
    Zheng Y, Wang GZ, Wang K, et al. Correlation of the master curve reference temperature T0 with unified constraint parameter. Engineering Fracture Mechanics, 2021, 253: 107867 doi: 10.1016/j.engfracmech.2021.107867
    [29]
    Beremin FM, Pineau A, Mudry F, et al. A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metallurgical Transactions A, 1983, 14(11): 2277-2287 doi: 10.1007/BF02663302
    [30]
    Margolin BZ, Shvetsova VA, Gulenko AG, et al. Prometey local approach to brittle fracture: development and application. Engineering Fracture Mechanics, 2008, 75(11): 3483-3498 doi: 10.1016/j.engfracmech.2007.05.002
    [31]
    Margolin BZ, Fomenko VN, Gulenko AG, et al. Further improvement of the Prometey model and unified curve method-part 1: Improvement of the Prometey model. Engineering Fracture Mechanics, 2017, 182: 467-486 doi: 10.1016/j.engfracmech.2017.05.015
    [32]
    Margolin BZ, Gulenko AG, Fomenko VN, et al. Further improvement of the Prometey model and unified curve method part 2: Improvement of the unified curve method. Engineering Fracture Mechanics, 2018, 191: 383-402 doi: 10.1016/j.engfracmech.2017.11.014
    [33]
    Hohe J, Hebel J, Friedmann V, et al. Probabilistic failure assessment of ferritic steels using the master curve approach including constraint effects. Engineering Fracture Mechanics, 2007, 74(8): 1274-1292 doi: 10.1016/j.engfracmech.2006.07.007
    [34]
    ASTM E1820-11. Standard test methods for measurement of fracture toughness//Annual Book of ASTM Standards. Philadelphia, PA: American Society for Testing and Materials, 2011
  • Related Articles

    [1]Li Yilei, Yao Di, Qiao Hongwei, Li Xihua, Zhang Kun, Sun Lei, Yan Xiao, Li Pengzhou. DYNAMIC DUCTILE-BRITTLE TRANSITION AND FRACTURE TOUGHNESS MEASUREMENT OF METAL UNDER INTERMEDIATE-LOW LOADING VELOCITIES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(2): 424-436. DOI: 10.6052/0459-1879-20-304
    [2]Liu Ming, Hou Dongyang, Gao Chenghui. STUDY ON FRACTURE TOUGHNESS OF SEMICONDUCTOR MATERIAL USING VICKERS AND BERKOVICH INDENTERS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(2): 413-423. DOI: 10.6052/0459-1879-20-349
    [3]Xie Yiling, Liu Ze. A GENERAL METHOD TO INTRODUCE PRE-CRACK IN BULK METALLIC GLASSES FOR PLANE STRAIN FRACTURE TOUGHNESS TEST[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(2): 392-399. DOI: 10.6052/0459-1879-19-377
    [4]Li Yabo, Song Qingyuan, Yang kai, Chen Yiping, Sun Chengqi, Hong Youshi. PROBABILISTIC CONTROL VOLUME METHOD FOR THE SIZE EFFECT OF SPECIMEN FATIGUE PERFORMANCE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(5): 1363-1371. DOI: 10.6052/0459-1879-19-118
    [5]Cai Baochun, Jiang Huazhen, Wang Wenzhong, Li Zhengyang, Wang Baoan, Yang Bing, Ren Zhiyuan. INFLUENCE OF SURFACE ROUGHNESS ORIENTATIONS ON FRICTION COEFFICIENT OF WHEEL/RAIL SPECIMEN IN OIL LUBRICATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(5): 1114-1125. DOI: 10.6052/0459-1879-16-080
    [6]Dai Yuntong, Chen Zhenning, Zhu Feipeng, He Xiaoyuan. MEASUREMENT OF LÜDERS BAND IN SMALL SIZE LOW CARBON STEEL SPECIMEN BY 3D DIGITAL IMAGE CORRELATION METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(1): 119-126. DOI: 10.6052/0459-1879-14-175
    [7]Haijun Li, Feng Liu, T.C. Wang. Fracture analysis of pzt-4 compact tension specimen[J]. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(5): 701-706. DOI: 10.6052/0459-1879-2008-5-2007-625
    [8]Shidong Pan, Linzhi Wu, Yuguo Sun. Analysis of fracture behavior of honeycomb sandwich specimens[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(5): 610-617. DOI: 10.6052/0459-1879-2007-5-2006-440
    [9]The incremental Young's moduli in the rat small intestine caused by[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(2): 171-176. DOI: 10.6052/0459-1879-2004-2-2003-188
    [10]A MICRO-MODEL OF DUCTILE FRACTUKE AND IT’S APPLICAION TO CONSTRAINED FRACTURE[J]. Chinese Journal of Theoretical and Applied Mechanics, 1995, 27(S): 120-124. DOI: 10.6052/0459-1879-1995-S-1995-513
  • Cited by

    Periodical cited type(1)

    1. 李国强,俞海兵,巫元俊. 基于多温度SDFF模型的反应堆压力容器钢韧脆转变区韧性评价. 机械工程材料. 2024(11): 111-118 .

    Other cited types(0)

Catalog

    Article Metrics

    Article views (444) PDF downloads (60) Cited by(1)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return