PROGRESS IN INSTRUMENTED INDENTATION METHODS FOR DETERMINATION OF SURFACE RESIDUAL STRESS

Peng Guangjian; Zhang Taihua

doi:10.6052/0459-1879-22-222

Volume 54 Issue 8

Aug. 2022

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Theoretical and Applied Mechanics > 2022 > 54(8): 2287-2303. > DOI: 10.6052/0459-1879-22-222 CSTR: 32045.14.0459-1879-22-222

Peng Guangjian, Zhang Taihua. Progress in instrumented indentation methods for determination of surface residual stress. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(8): 2287-2303. DOI: 10.6052/0459-1879-22-222

Citation:

PDF (4662 KB)

PROGRESS IN INSTRUMENTED INDENTATION METHODS FOR DETERMINATION OF SURFACE RESIDUAL STRESS

Peng Guangjian^*,
Zhang Taihua^†,

*.
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
†.
Institute of Solid Mechanics, School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China

Received Date: May 25, 2022
Accepted Date: June 20, 2022
Available Online: June 21, 2022

Graphical Abstract

Abstract

Abstract

By reviewing the instrumented indentation methods for determination of surface residual stress, the basic principle and mechanism for measuring residual stress by instrumented indentation was first expounded. The technical route for establishment of instrumented indentation methods for residual stress determination was also summarized. According to the classification of these methods, six representative instrumented indentation methods were discussed in detail to find out their corresponding advantages and limitations. Then, four commonly used stress-generating jigs to verify the reliability of instrumented indentation methods for residual stress determination were illustrated. Finally, the progress in instrumented indentation methods for surface residual stress determination was summarized. It was concluded that the future goal is to establish an instrumented indentation method for determining the mechanical parameters and non-equibiaxial residual stresses simultaneously without using stress-free reference samples. To establish such method, four research essentials, i.e., clear examination mechanism, reliable analysis process, technical feasibility, and reliable results, were discussed.
- instrumented micro/nano-indentation,
- residual stress,
- inverse determination,
- non-destructive testing,
- reliability verification

FullText(HTML)

References (93)

References

[1]	王海斗, 朱丽娜, 邢志国. 表面残余应力检测技术. 北京: 机械工业出版社, 2013 Wang Haidou, Zhu Lina, Xing Zhiguo. Surface Residual Stress Measurement Techniques. Beijing: China Machine Press, 2013 (in Chinese)
[2]	米谷茂. 残余应力的产生与对策. 北京: 机械工业出版社, 1983 Mi Gumao. Generation of Residual Stress and Countermeasures. Beijing: China Machine Press, 1983 (in Chinese)
[3]	Webster GA, Ezeilo AN. Residual stress distributions and their influence on fatigue lifetimes. International Journal of Fatigue, 2001, 23: 375-383
[4]	Yang YC, Chang E. Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti-6Al-4V substrate. Biomaterials, 2001, 22(13): 1827-1836 doi: 10.1016/S0142-9612(00)00364-1
[5]	Toribio J. Residual stress effects in stress-corrosion cracking. Journal of Materials Engineering and Performance, 1998, 7(2): 173-182 doi: 10.1361/105994998770347891
[6]	孙杰, 柯映林. 残余应力对航空整体结构件加工变形的影响分析. 机械工程学报, 2005, 41(2): 117-122 doi: 10.3321/j.issn:0577-6686.2005.02.023 Sun Jie, Ke Yinglin. Study on machining distortion of unitization airframe due to residual stress. Chinese Journal of Mechanical Engineering, 2005, 41(2): 117-122 (in Chinese) doi: 10.3321/j.issn:0577-6686.2005.02.023
[7]	宋天明. 焊接残余应力的产生与消除. 北京: 中国石化出版社, 2004 Song Tianming. Generation and Elimination of Welding Residual Stress. Beijing: China Petrochemical Press, 2004 (in Chinese)
[8]	张显程, 徐滨士, 王海斗, 等. 功能梯度涂层热残余应力. 机械工程学报, 2006, 42(1): 18-22 doi: 10.3321/j.issn:0577-6686.2006.01.004 Zhang Xiancheng, Xu Binshi, Wang Haidou, et al. Thermal residual stresses in functionally graded coatings. Chinese Journal of Mechanical Engineering, 2006, 42(1): 18-22 (in Chinese) doi: 10.3321/j.issn:0577-6686.2006.01.004
[9]	Schajer GS. Universal calibration constants for strain gauge hole-drilling residual stress measurements. Experimental Mechanics, 2022, 62(2): 351-358 doi: 10.1007/s11340-021-00771-0
[10]	Olson MD, DeWald AT, Hill MR. An uncertainty estimator for slitting method residual stress measurements including the influence of regularization. Experimental Mechanics, 2020, 60(1): 65-79 doi: 10.1007/s11340-019-00535-x
[11]	Ghaedamini R, Ghassemi A, Atrian A. A comparative experimental study for determination of residual stress in laminated composites using ring core, incremental hole drilling, and slitting methods. Materials Research Express, 2018, 6(2): 025205 doi: 10.1088/2053-1591/aaee46
[12]	Chen S, En YF, Li GY, et al. An ion beam layer removal method of determining the residual stress in the as-fabricated TSV-Cu/TiW/SiO₂/Si interface on a nanoscale. Microelectronics Reliability, 2020, 112: 113826 doi: 10.1016/j.microrel.2020.113826
[13]	Lodh A, Thool K, Samajdar I. X-ray diffraction for the determination of residual stress of crystalline material: An overview. Transactions of the Indian Institute of Metals, 2022, 75(4): 983-995 doi: 10.1007/s12666-022-02540-6
[14]	Faisal NH, Ahmed R, Prathuru AK, et al. Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. Experimental Mechanics, 2021, 62(3): 369-392
[15]	Acevedo R, Sedlak P, Kolman R, et al. Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: State of the art review. Journal of Materials Research and Technology, 2020, 9(4): 9457-9477 doi: 10.1016/j.jmrt.2020.05.092
[16]	Dong H, Liu X, Song Y, et al. Quantitative evaluation of residual stress and surface hardness in deep drawn parts based on magnetic Barkhausen noise technology. Measurement, 2021, 168: 108473 doi: 10.1016/j.measurement.2020.108473
[17]	张泰华. 微/纳米力学测试技术—仪器化压入的测量、分析、应用及其标准化. 北京: 科学出版社, 2013 Zhang Taihua. Micro/nano Mechanical Testing Technology—Measurement, Analysis, Application and Standardization of Instrumented Indentation. Beijing: Science Press, 2013 (in Chinese)
[18]	Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research, 1992, 7(6): 1564-1583 doi: 10.1557/JMR.1992.1564
[19]	Sun YH, Peng GJ, Hu YH, et al. Spherical indentation model for evaluating the elastic properties of the shell of microsphere with core-shell structure. International Journal of Solids and Structures, 2021, 230-231: 111159 doi: 10.1016/j.ijsolstr.2021.111159
[20]	Zhang TH, Yu C, Peng GJ, et al. Identification of the elastic–plastic constitutive model for measuring mechanical properties of metals by instrumented spherical indentation test. MRS Communications, 2017, 7(2): 221-228 doi: 10.1557/mrc.2017.28
[21]	Peng GJ, Zhang TH, Feng YH, et al. Determination of shear creep compliance of linear viscoelastic-plastic solids by instrumented indentation. Polymer Testing, 2012, 31(8): 1038-1044 doi: 10.1016/j.polymertesting.2012.07.007
[22]	Cheng YT, Cheng CM, Ni WY. Methods of obtaining instantaneous modulus of viscoelastic solids using displacement-controlled instrumented indentation with axisymmetric indenters of arbitrary smooth profiles. Materials Science and Engineering A, 2006, 423(1-2): 2-7 doi: 10.1016/j.msea.2005.09.134
[23]	Peng GJ, Xu FL, Chen JF, et al. Evaluation of non-equibiaxial residual stresses in metallic materials via instrumented spherical indentation. Metals, 2020, 10(4): 440 doi: 10.3390/met10040440
[24]	王海斗, 朱丽娜, 徐滨士. 纳米压痕技术检测残余应力. 北京: 科学出版社, 2016 Wang Haidou, Zhu Lina, Xu Binshi. Measurement of Residual Stress by Nanoindentation Technique. Beijing: Science Press, 2016 (in Chinese)
[25]	Jang J. Estimation of residual stress by instrumented indentation A review. Journal of Ceramic Processing Research, 2009, 10(3): 391-400
[26]	逯智科. 金属材料表面残余应力的仪器化压入测试技术. [博士论文]. 北京: 中国科学院大学, 2015 Lu Zhike. Determination of Surface Residual Stresses of Metals by Instrumented Indentation Testing. [PhD Thesis]. Beijing: University of Chinese Academy of Sciences, 2015 (in Chinese)
[27]	Peng GJ, Lu ZK, Ma Y, et al. Spherical indentation method for estimating equibiaxial residual stress and elastic-plastic properties of metals simultaneously. Journal of Materials Research, 2018, 33(8): 884-897 doi: 10.1557/jmr.2018.57
[28]	Hosseinzadeh AR, Mahmoudi AH. An approach for Knoop and Vickers indentations to measure equi-biaxial residual stresses and material properties: A comprehensive comparison. Mechanics of Materials, 2019, 134: 153-164 doi: 10.1016/j.mechmat.2019.04.010
[29]	Zhang T, Guo J, Wang W. A strain-pattern-based spherical indentation method for simultaneous uniaxial tensile residual stress and flow property determination. Journal of Strain Analysis for Engineering Design, 2020, 56(1): 50-64
[30]	Chen X, Yan J, Karlsson AM. On the determination of residual stress and mechanical properties by indentation. Materials Science and Engineering A, 2006, 416: 139-149 doi: 10.1016/j.msea.2005.10.034
[31]	Taljat B, Pharr GM. Measurement of residual stress by load and depth sensing spherical indentation. Materials Research Society Symposium Proceedings, 2000, 594: 519-524
[32]	Suresh S, Giannakopoulos AE. A new method for estimating residual stresses by instrumented sharp indentation. Acta Materialia, 1998, 46(16): 5755-5767 doi: 10.1016/S1359-6454(98)00226-2
[33]	Lee YH, Kwon D. Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Materialia, 2004, 52: 1555-1563 doi: 10.1016/j.actamat.2003.12.006
[34]	Carlsson S, Larsoon PL. On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis. Acta Materialia, 2001, 49: 2179-2191
[35]	Carlsson S, Larsoon PL. On the determination of residual stress and strain fields by sharp indentation testing. Part II: Experimental investigation. Acta Materialia, 2001, 49: 2193-2203
[36]	Lu ZK, Feng YH, Peng GJ, et al. Estimation of surface equi-biaxial residual stress by using instrumented sharp indentation. Materials Science and Engineering A, 2014, 614: 264-272 doi: 10.1016/j.msea.2014.07.041
[37]	Wang Q, Ji B, Fu Z, et al. Experimental study on the determination of welding residual stress in rib-deck weld by sharp indentation testing. Thin-Walled Structures, 2021, 161: 107516 doi: 10.1016/j.tws.2021.107516
[38]	Ahn SM, Park SY, Kim YC, et al. Surface residual stress in soda-lime glass evaluated using instrumented spherical indentation testing. Journal of Materials Science, 2015, 50(23): 7752-7759 doi: 10.1007/s10853-015-9345-x
[39]	Shen L, He Y, Liu D, et al. A novel method for determining surface residual stress components and their directions in spherical indentation. Journal of Materials Research, 2015, 30(8): 1078-1089 doi: 10.1557/jmr.2015.87
[40]	Wang Z, Deng L, Zhao J. A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test. Materials Research Express, 2018, 6(3): 036512 doi: 10.1088/2053-1591/aaeca6
[41]	Zhang TH, Cheng WQ, Peng GJ, et al. Numerical investigation of spherical indentation on elastic-power-law strain-hardening solids with non-equibiaxial residual stresses. MRS Communications, 2019, 9(1): 360-369 doi: 10.1557/mrc.2018.240
[42]	Deng L, Zhao J, Wang Z. Estimation of residual stress of metal material with yield plateau by continuous spherical indentation method. Materials Research Express, 2020, 7(3): 036537 doi: 10.1088/2053-1591/ab7069
[43]	Liang T, Yuan WK, Wang GF. Influence of equi-biaxial residual stress on spherical indentation of strain hardening materials. International Journal of Applied Mechanics, 2021, 13(5): 2150052 doi: 10.1142/S1758825121500526
[44]	Choi MJ, Kang SK, Kang I, et al. Evaluation of nonequibiaxial residual stress using Knoop indenter. Journal of Materials Research, 2011, 27(1): 121-125
[45]	Kim YC, Choi MJ, Kwon D, et al. Estimation of principal directions of bi-axial residual stress using instrumented Knoop indentation testing. Metals and Materials International, 2015, 21(5): 850-856 doi: 10.1007/s12540-015-5176-1
[46]	Rickhey F, Lee JH, Lee H. A contact size-independent approach to the estimation of biaxial residual stresses by Knoop indentation. Materials & Design, 2015, 84: 300-312
[47]	Kim YC, Ahn HJ, Kwon D, et al. Modeling and experimental verification for non-equibiaxial residual stress evaluated by Knoop indentations. Metals and Materials International, 2016, 22(1): 12-19 doi: 10.1007/s12540-015-5515-2
[48]	Ahn HJ, Kim JH, Xu H, et al. Directionality of residual stress evaluated by instrumented indentation testing using wedge indenter. Metals and Materials International, 2017, 23(3): 465-472 doi: 10.1007/s12540-017-6573-4
[49]	Hou XD, Jennett NM. A method to separate and quantify the effects of indentation size, residual stress and plastic damage when mapping properties using instrumented indentation. Journal of Physics D: Applied Physics, 2017, 50(45): 455304 doi: 10.1088/1361-6463/aa8a22
[50]	Tsui TY, Oliver WC, Pharr GM. Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy. Journal of Materials Research, 1996, 11(3): 752-759
[51]	Bolshakov A, Oliver WC, Pharr GM. Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations. Journal of Materials Research, 1996, 11(3): 760-768
[52]	Stilwell NA, Tabor D. Elastic recovery of conical indentations. Proceedings of the Physical Society, 1961, 78: 169-179 doi: 10.1088/0370-1328/78/2/302
[53]	Kim Jh, Choi S, Lee J, et al. An indentation method for evaluation of residual stress: Estimation of stress-free indentation curve using stress-independent indentation parameters. Journal of Materials Research, 2019, 34(7): 1103-1111 doi: 10.1557/jmr.2018.492
[54]	Xu ZH, Li X. Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation. Acta Materialia, 2005, 53(7): 1913-1919 doi: 10.1016/j.actamat.2005.01.002
[55]	Ling L, Long S, Ma Z, et al. Numerical study on the effects of equi-biaxial residual stress on mechanical properties of Nickel film by means of nanoindentation. Journal of Materials Science & Technology, 2010, 26(11): 1001-1005
[56]	Khan MK, Fitzpatrick ME, Hainsworth SV, et al. Effect of residual stress on the nanoindentation response of aerospace aluminium alloys. Computational Materials Science, 2011, 50(10): 2967-2976 doi: 10.1016/j.commatsci.2011.05.015
[57]	Meng QN, Wen M, Hu CQ, et al. Influence of the residual stress on the nanoindentation-evaluated hardness for zirconiumnitride films. Surface and Coatings Technology, 2012, 206(14): 3250-3257 doi: 10.1016/j.surfcoat.2012.01.021
[58]	Atar E, Sarioglu C, Demirler U, et al. Residual stress estimation of ceramic thin films by X-ray diffraction and indentation techniques. Scripta Materialia, 2003, 48(9): 1331-1336 doi: 10.1016/S1359-6462(03)00019-8
[59]	Wang L, Bei H, Gao YF, et al. Effect of residual stresses on the hardness of bulk metallic glasses. Acta Materialia, 2011, 59(7): 2858-2864 doi: 10.1016/j.actamat.2011.01.025
[60]	Yuan L, Yuan W, Wang G. Effects of residual stress on the hardness of elastoplastic material under spherical indentation. Journal of Applied Mechanics, 2020, 87(5): 051004 doi: 10.1115/1.4046004
[61]	Larsson PL. On the variation of hardness due to uniaxial and equi-biaxial residual surface stresses at elastic-plastic indentation. Journal of Materials Engineering and Performance, 2018, 27(6): 3168-3173 doi: 10.1007/s11665-018-3393-8
[62]	Hertz H. Miscellaneous Papers. London: Macmillan, 1896
[63]	Pham TH, Kim SE. Determination of equi-biaxial residual stress and plastic properties in structural steel using instrumented indentation. Materials Science and Engineering A, 2017, 688: 352-363 doi: 10.1016/j.msea.2017.01.109
[64]	Jeong C, Hwang Y, Kim N, et al. Evaluation of equi-biaxial residual stress from spherical indentation imprint. International Journal of Mechanical Sciences, 2021, 211: 106773 doi: 10.1016/j.ijmecsci.2021.106773
[65]	Liu X, Cai L. Indentation model to obtain residual stress based on deviator stress equivalence and its application. Materials Today Communications, 2021, 28: 102454 doi: 10.1016/j.mtcomm.2021.102454
[66]	Pak SY, Kim SY, Kim SH, et al. Measurement of residual stresses in polymeric parts by indentation method. Polymer Testing, 2013, 32(5): 946-952 doi: 10.1016/j.polymertesting.2013.04.011
[67]	Zhu L, Xu B, Wang H, et al. Measurement of residual stresses using nanoindentation method. Critical Reviews in Solid State and Materials Sciences, 2014, 40(2): 77-89
[68]	Akahori T, Nagakura T, Fushimi S, et al. An indentation method for evaluating the residual stress of polymeric materials: Equi-biaxial and non-equi-biaxial residual stress states. Polymer Testing, 2018, 70: 378-388 doi: 10.1016/j.polymertesting.2018.07.024
[69]	Moharrami R, Sanayei M. Numerical study of the effect of yield strain and stress ratio on the measurement accuracy of biaxial residual stress in steels using indentation. Journal of Materials Research and Technology, 2020, 9(3): 3950-3957 doi: 10.1016/j.jmrt.2020.02.021
[70]	Moharrami R, Sanayei M. Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels. Precision Engineering, 2020, 64: 220-227 doi: 10.1016/j.precisioneng.2020.04.011
[71]	Moharrami R, Sanayei M. Developing a method in measuring residual stress on steel alloys by instrumented indentation technique. Measurement, 2020, 158: 107718 doi: 10.1016/j.measurement.2020.107718
[72]	Greco A, Sgambitterra E, Furgiuele F. A new methodology for measuring residual stress using a modified Berkovich nano-indenter. International Journal of Mechanical Sciences, 2021, 207: 106662 doi: 10.1016/j.ijmecsci.2021.106662
[73]	Larsson PL. On the determination of biaxial residual stress fields from global indentation quantities. Tribology Letters, 2014, 54(1): 89-97 doi: 10.1007/s11249-014-0312-5
[74]	Wendler M, Belli R, Petschelt A, et al. Characterization of residual stresses in zirconia veneered bilayers assessed via sharp and blunt indentation. Dental Materials, 2015, 31(8): 948-957 doi: 10.1016/j.dental.2015.05.001
[75]	Larsson PL. On the influence of elastic deformation for residual stress determination by sharp indentation testing. Journal of Materials Engineering and Performance, 2017, 26(8): 3854-3860 doi: 10.1007/s11665-017-2816-2
[76]	Zhu J, Xie H, Hu Z, et al. Cross-sectional residual stresses in thermal spray coatings measured by Moiré interferometry and nanoindentation technique. Journal of Thermal Spray Technology, 2012, 21(5): 810-817 doi: 10.1007/s11666-012-9732-7
[77]	Fang X, Jin G, Cui XF, et al. Evolution characteristics of residual stress in metastable Ni-B alloy coatings identified by nanoindentation. Surface and Coatings Technology, 2016, 305: 208-214 doi: 10.1016/j.surfcoat.2016.08.042
[78]	Dong K, Lu F, Huang W, et al. Residual stress and fracture toughness of thick 8YSZ-Al₂O₃ composite coatings via a modified Vickers indentation method. Vacuum, 2020, 177: 109437 doi: 10.1016/j.vacuum.2020.109437
[79]	Mao W, Zhang H, Zhang Z, et al. Evaluation of fracture toughness and residual stress for both single GYbZ and double layered GYbZ/8YSZ coatings by modified indentation tests. Surface and Coatings Technology, 2020, 392: 125723 doi: 10.1016/j.surfcoat.2020.125723
[80]	Lee YH, Kwon D. Measurement of residual-stress effect by nanoindentation on elastically strained (100) W. Scripta Materialia, 2003, 49(5): 459-465 doi: 10.1016/S1359-6462(03)00290-2
[81]	Cheng YT, Cheng CM. Scaling approach to conical indentation in elastic-plastic solids with work hardening. Journal of Applied Physics, 1998, 84(3): 1284-1291 doi: 10.1063/1.368196
[82]	Yu C, Feng YH, Yang R, et al. An integrated method to determine elastic-plastic parameters by instrumented spherical indentation. Journal of Materials Research, 2014, 29(9): 1095-1103 doi: 10.1557/jmr.2014.78
[83]	Marshall DB, Lawn BR. Residual stress effects in sharp contact cracking. I:Indentation fracture mechanics. Journal of Materials Science, 1979, 14: 2001-2012
[84]	Marshall DB, Lawn BR, Chantikul P. Residual stress effects in sharp contact cracking. II:Strength degradation. Journal of Materials Science, 1979, 14(9): 2225-2235
[85]	毛卫国, 杨鹏, 戴翠英, 等. 脆性涂层材料断裂韧性和残余应力压痕表征技术综述. 材料导报, 2017, 31(7): 1-11 doi: 10.11896/j.issn.1005-023X.2017.07.001Flow Mao Weiguo, Yang Peng, Dai Cuiying, et al. A review of Vickers indentation measurements for fracture toughness and residual stress of brittle coating systems. Materials Reports, 2017, 31(7): 1-11 (in Chinese) doi: 10.11896/j.issn.1005-023X.2017.07.001Flow
[86]	Hivart P, Crampon J. Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr₃C₂/Ni-Cr coatings. Mechanics of Materials, 2007, 39(11): 998-1005 doi: 10.1016/j.mechmat.2007.05.002
[87]	Wan J, Zhou M, Yang XS, et al. Fracture characteristics of freestanding 8 wt% Y₂O₃–ZrO₂ coatings by single edge notched beam and Vickers indentation tests. Materials Science and Engineering A, 2013, 581: 140-144 doi: 10.1016/j.msea.2013.05.086
[88]	Giannakopoulos AE. The influence of initial elastic surface stresses on instrumented sharp indentation. Journal of Applied Mechanics, 2003, 70(5): 638-643 doi: 10.1115/1.1485756
[89]	Tabor D. The hardness of solids. Review of Physics in Technology, 1970, 1(3): 145-179 doi: 10.1088/0034-6683/1/3/I01
[90]	Zhou P, Jin X, Chen J, et al. Residual stress estimation in laminated ZrB₂-SiC ultra-high temperature ceramics with strong interfaces using X-ray diffraction and indentation techniques. Ceramics International, 2017, 43(15): 12459-12465 doi: 10.1016/j.ceramint.2017.06.115
[91]	Chen J, Liu J, Sun C. Residual stress measurement via digital image correlation and sharp indentation testing. Optical Engineering, 2016, 55(12): 124102 doi: 10.1117/1.OE.55.12.124102
[92]	Burley M, Campbell JE, Reiff-Musgrove R, et al. The effect of residual stresses on stress-strain curves obtained via profilometry-based inverse finite element method indentation plastometry. Advanced Engineering Materials, 2021, 23(5): 2001478 doi: 10.1002/adem.202001478
[93]	徐风雷. 便携式微米压入仪研制及非等轴残余应的球形压入检测技术. [博士论文]. 杭州: 浙江工业大学, 2021 Xu Fenglei. Development of the portable micro-indentation device and evaluation of non-equibiaxial residual stresses by spherical indentation. [PhD Thesis]. Hangzhou: Zhejiang University of Technology, 2021 (in Chinese)

[1]	Bai Zhengfeng, Niu Yuxin, Cui Lewen, Zhao Jijun. NON-PROBABILISTIC RELIABILITY ANALYSIS OF FLEXIBLE MANIPULATOR WITH JOINT CLEARANCE AND UNCERTAIN PARAMETERS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2025, 57(1): 224-236. DOI: 10.6052/0459-1879-24-406
[2]	Jiang Chao, Zheng Jing, Han Xu, Zhang Qingfei. A PROBABILITY AND INTERVAL HYBRID STRUCTURAL RELIABILITY ANALYSIS METHOD CONSIDERING PARAMETERS’ CORRELATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(4): 591-600. DOI: 10.6052/0459-1879-14-025
[3]	Jiang Chao, Zhang Zhe, Han Xu, Bai Yingchun. AN EVIDENCE-THEORY-BASED RELIABILITY ANALYSIS METHOD FOR UNCERTAIN STRUCTURES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2013, 45(1): 103-115. DOI: 10.6052/0459-1879-12-040
[4]	Chen Weidong, Li Jiancao. ADVANCED EQUIVALENT PLANE METHOD FOR STRUCTURAL SYSTEM RELIABILITY[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, (4): 797-801. DOI: 10.6052/0459-1879-11-328
[5]	Yijie Chen, Zhanhua Yang, Qiangshun Lei, Yajun Wang, Dan Ning. Research on the reliability of damping valve with annular slice[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(5): 815-820. DOI: 10.6052/0459-1879-2009-5-2008-546
[6]	Xiaojun Wang, Zhiping Qiu, Zhe Wu. Non-probabilistic set-based model for structural reliability[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(5): 641-646. DOI: 10.6052/0459-1879-2007-5-2006-629
[7]	Yangjun Luo, Zhan Kang. Non-probabilistic reliability-based topology optimization of continuum structures[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(1): 125-131. DOI: 10.6052/0459-1879-2007-1-2006-181
[8]	Zhan Kang, Yangjun Luo. On structural optimization for non-probabilistic reliability based on convex models[J]. Chinese Journal of Theoretical and Applied Mechanics, 2006, 38(6): 807-815. DOI: 10.6052/0459-1879-2006-6-2005-629
[9]	STUDY ON THE RELIABILITY OF RESIDUAL STRENGTH IN FATIGUE[J]. Chinese Journal of Theoretical and Applied Mechanics, 1998, 30(2): 220-228. DOI: 10.6052/0459-1879-1998-2-1995-119
[10]	THE APPLICATION OF IMPORTANT SAMPLING METHOD IN TUBULAR JOINT FATIGUE RELIABILITY ANALYSIS[J]. Chinese Journal of Theoretical and Applied Mechanics, 1996, 28(3): 359-362. DOI: 10.6052/0459-1879-1996-3-1995-341

Cited By

Cited by

Periodical cited type(0)

Other cited types(3)

Get Citation

PDF

XML

Article Metrics

Article views (857) PDF downloads (146) Cited by(3)

PROGRESS IN INSTRUMENTED INDENTATION METHODS FOR DETERMINATION OF SURFACE RESIDUAL STRESS

Abstract

References

Related Articles

Cited by

Periodical cited type(0)

Other cited types(3)

Catalog

Article Metrics

Related

Download Center

Author Center

PROGRESS IN INSTRUMENTED INDENTATION METHODS FOR DETERMINATION OF SURFACE RESIDUAL STRESS

Abstract

References

Related Articles

Cited by

Periodical cited type(0)

Other cited types(3)

Catalog

Article Metrics

Related

Download Center

Author Center

Export File

Citation

Format

Content