EI、Scopus 收录
中文核心期刊
Qin Tianyu, Ren Xinyan, Hu Feifei, Liu Yujie, Ao Ni, Kan Qianhua, Wu Shengchuan, Kang Guozheng. Remaining life assessment of hook tail frame in railway heavy-haul wagon based on real loading spectrum. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(7): 1830-1838. DOI: 10.6052/0459-1879-21-687
Citation: Qin Tianyu, Ren Xinyan, Hu Feifei, Liu Yujie, Ao Ni, Kan Qianhua, Wu Shengchuan, Kang Guozheng. Remaining life assessment of hook tail frame in railway heavy-haul wagon based on real loading spectrum. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(7): 1830-1838. DOI: 10.6052/0459-1879-21-687

REMAINING LIFE ASSESSMENT OF HOOK TAIL FRAME IN RAILWAY HEAVY-HAUL WAGON BASED ON REAL LOADING SPECTRUM

  • Received Date: December 26, 2021
  • Revised Date: January 29, 2022
  • Accepted Date: March 07, 2022
  • Available Online: March 08, 2022
  • With the increase in the operation scale and frequency of China heavy-haul railroad wagons, the failure fracture problem of hook tail frame is becoming more and more serious. In this work, domestic 16/17 type hook tail frame (forged E-grade steel) was used as a research object, the basic mechanical properties and fracture performances of forged E-grade steel were firstly obtained by systematic material tests; secondly, a finite element model of the hook tail frame with initial crack defects was established; finally, the remaining life prediction of the damaged hook frame was calculated by using the NASGRO equation based on the measured loading spectrum. The results show that when the crack shape ratio of 0.8, 0.5, 0.3, the calculated remaining life of the hook tail frame gradually decreases, and the calculated remaining life of the fatigue crack propagation from 2 mm to 20 mm is 360000 km, 320000 km and 260000 km, respectively, all of which are less than one depot maintenance period; the remaining life ratios of the three profile ratios are small after crack expansion to 12 mm, which are only 4.7%, 4.0%, and 2.2% of the total remaining serviceable mileage. Therefore, it is reasonable to take 12 mm as the damage tolerance of the hook tail frame for stopping crack. To investigate the effect of near threshold area on crack propagation life, reducing the initial crack size to 0.5 mm with a shape ratio of 0.5, when the crack is near the crack propagation threshold area, the calculated remaining service mileage increases to 1.56 million km, which is 4.9 times of the initial crack of 2 mm, including three maintenance periods. These results can provide a basic reference for the optimization and strategy of the inspection interval of the hook tail frame widely used for railway heavy-haul railroad wagons.
  • [1]
    吴圣川, 任鑫焱, 康国政等. 铁路车辆部件抗疲劳评估的进展与挑战. 交通运输工程学报, 2021, 21(1): 81-114 (Wu Shengchuan, Ren Xinyan, Kang Guozheng, et al. Progress and challenge on fatigue resistance assessment of railway vehicle components. Journal of Traffic and Transportation Engineering, 2021, 21(1): 81-114 (in Chinese)

    Wu Shengchuan, Ren Xinyan, Kang Guozheng, et al. Progress and challenge on fatigue resistance assessment of railway vehicle components. Journal of Traffic and Transportation Engineering, 2021, 21(1): 81-114. (in Chinese))
    [2]
    Ge X, Ling L, Chen ZG, et al. Experimental assessment of the dynamic performance of slave control locomotive couplers in 20 000-tonne heavy-haul trains. Journal of Rail and Rapid Transit, 2021, 235(10): 1225-1236 doi: 10.1177/0954409721993618
    [3]
    景致明. 重载列车17型锻造钩尾框寿命预测研究. [硕士论文]. 成都: 西南交通大学, 2021

    Jing Zhiming. Study on life predection of the type 17 forged coupler yoke. [Master Thesis]. Chengdu: Southwest Jiaotong University (in Chinese))
    [4]
    郭光玉, 高志, 宋亮. 17型车钩及其零部件故障简析. 铁道机车车辆, 2009, 29(1): 47-49 (Guo Guangyu, Gao Zhi, Song Liang. Fault analysis of 17 type coupler and its components. Railway Locomotive &Car, 2009, 29(1): 47-49 (in Chinese)

    Guo Guangyu, Gao Zhi, Song Liang. Fault analysis of 17 type coupler and its components. Railway Locomotive & Car, 2009, 29(1): 47-49 (in Chinese))
    [5]
    金希红, 曾燕军, 周坤等. 重载机车与102车钩系统的相互作用关系. 科学通报, 2019, 64(25): 2617-2624 (Jin Xihong, Zeng Yanjun, Zhou Kun, et al. Interactions research between heavy haul locomotive and 102 coupler system. Chinese Science Bulletin, 2019, 64(25): 2617-2624 (in Chinese) doi: 10.1360/N972018-01243

    Jin Xihong, Zeng Yanjun, Zhou Kun, et al. Interactions research between heavy haul locomotive and 102 coupler system. Chinese Science Bulletin, 2019, 64(25): 2617-2624. (in Chinese)) doi: 10.1360/N972018-01243
    [6]
    Guo LR, Wang KY. Analysis of coupler jackknifing and its effect on locomotives on a tangent track. Journal of Rail and Rapid Transit, 2018, 232(5): 1559-1573 doi: 10.1177/0954409717738429
    [7]
    朱涛, 张敬科, 吴启凡等. 车钩缓冲装置对轨道列车碰撞安全性的影响综述. 交通运输工程学报, 2021, 21(1): 233-249 (Zhu Tao, Zhang Jingke, Wu Qifan, et al. Review on influence of coupler and draft gear on safety of railway train collision. Journal of Traffic and Transportation Engineering, 2021, 21(1): 233-249 (in Chinese)

    Zhu Tao, Zhang Jingke, Wu Qifan, et al. Review on influence of coupler and draft gear on safety of railway train collision[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 233-249. (in Chinese))
    [8]
    Beretta S, Carboni M, Fiore G, et al. Corrosion–fatigue of A1 N railway axle steel exposed to rainwater. International Journal of Fatigue, 2010, 32(6): 952-961 doi: 10.1016/j.ijfatigue.2009.08.003
    [9]
    Beretta S, Carboni M, Cantini S, et al. Application of fatigue crack growth algorithms to railway axles and comparison of two steel grades. Journal of Rail & Rapid Transit, 2004, 218(4): 317-326
    [10]
    Traupe M, Jenne S, Lütkepohl K, et al. Experimental validation of inspection intervals for railway axles accompanying the engineering process. International Journal of Fatigue, 2016, 86(792): 44-51
    [11]
    Makino T, Kato T, Hirakawa K. Review of the fatigue damage tolerance of high-speed railway axles in Japan. Engineering Fracture Mechanics, 2011, 78(5): 810-825 doi: 10.1016/j.engfracmech.2009.12.013
    [12]
    李晓慧, 谢基龙. 重载列车E级钢钩舌疲劳裂纹扩展条件及寿命预测. 北京交通大学学报, 2006(4): 102-104 (Li Xiaohui, Xie Jilong. Prediction of fatigue crack growth condition and lifetime on coupler guard arm area of E grade steel of burden strain. Journal of Beijing Jiaotong University, 2006(4): 102-104 (in Chinese) doi: 10.3969/j.issn.1673-0291.2006.04.025

    Li Xiaohui, Xie Jilong. Prediction of fatigue crack growth condition and lifetime on coupler guard arm area of E grade steel of burden strain. Journal of Beijing Jiaotong University, 2006(4): 102-104. (in Chinese)) doi: 10.3969/j.issn.1673-0291.2006.04.025
    [13]
    刘青峰, 谢基龙, 缪龙秀等. 钩尾框尾部弯角疲劳裂纹扩展寿命预测研究. 铁道学报, 2002, 24(5): 42-46 (Liu Qingfeng, Xie Jilong, Miao Longxiu, et al. Prediction of fatigue crack lifetime of the end flanged corner of coupler yoke. Journal of the China Railway Society, 2002, 24(5): 42-46 (in Chinese)

    Liu Qingfeng, Xie Jilong, Miao Longxiu, et al. Prediction of fatigue crack lifetime of the end flanged corner of coupler yoke. Journal of the China Railway Society, 2002, 24(5): 42-46. (in Chinese))
    [14]
    Hu YN, Qin QB, Wu SC, et al. Fatigue resistance and remaining life assessment of induction-hardened S38 C steel railway axles. International Journal of Fatigue, 2021, 144: 106068 doi: 10.1016/j.ijfatigue.2020.106068
    [15]
    Guo F, Wu SC, Liu JX, et al. A time-domain stepwise fatigue assessment to bridge small-scale fracture mechanics with large-scale system dynamics for high-speed maglev lightweight bogies. Engineering Fracture Mechanics, 2021, 248: 107711 doi: 10.1016/j.engfracmech.2021.107711
    [16]
    Makino T, Sakai H, Kozuka C, et al. Overview of fatigue damage evaluation rule for railway axles in Japan and fatigue property of railway axle made of medium carbon steel. International Journal of Fatigue, 2020, 132: 105361 doi: 10.1016/j.ijfatigue.2019.105361
    [17]
    董志波, 周守振, 武继胜等. 基于轮廓法与固有应变理论焊接纵向残余应力的三维重构. 中国科学: 技术科学, 2020, 50(7): 957-963 (Dong Zhibo, Zhen Shouzhen, Wu Jisheng, et al. Reconstructing a 3 D map of longitudinal residual stress by combining the inherent strain theory and contour method. Scientia Sinica: Technologica, 2020, 50(7): 957-963 (in Chinese) doi: 10.1360/SST-2020-0070

    Dong Zhibo, Zhen Shouzhen, Wu Jisheng, et al. Reconstructing a 3 D map of longitudinal residual stress by combining the inherent strain theory and contour method [J]. Scientia Sinica: Technologica, 2020, 50(7): 957-963. (in Chinese)) doi: 10.1360/SST-2020-0070
    [18]
    Yao DC, Liu HC, Yang JW, et al. Implementation of a novel algorithm of wheelset and axle box concurrent fault identification based on an efficient neural network with the attention mechanism. Journal of Intelligent Manufacturing, 2021, 32: 729-743 doi: 10.1007/s10845-020-01701-y
    [19]
    Maierhofer J, Pippan R, Ganser HP. Modified NASGRO equation for short cracks and application to the fitness-for-purpose assessment of surface-treated components. Procedia Materials Science, 2014, 3: 930-935 doi: 10.1016/j.mspro.2014.06.151
    [20]
    Hirakawa K, Toyama K, Kubota M. The analysis and prevention of failure in railway axles. International Journal of Fatigue, 1998, 20(2): 135-144 doi: 10.1016/S0142-1123(97)00096-0
    [21]
    Newman JC. A crack opening stress equation for fatigue crack growth. International Journal of Fracture, 1984, 24(4): 131-135 doi: 10.1007/BF00020751
    [22]
    The British Standards Institution. BS 7910: 2019 guide to methods for assessing the acceptability of flaws in metallic structures. London: British Standard Institution, 2019
    [23]
    Chai GZ. A mixed mode fracture J integral criterion for elastic perfectly plastic materials in small scale yielding. Engineering Fracture Mechanics, 1990, 37(3): 667-674 doi: 10.1016/0013-7944(90)90389-X
    [24]
    管艳华, 田武岭, 张建武等. 大秦线重载钩舌疲劳寿命有限元模拟分析. 机械设计与研究, 2012, 28(3): 122-123 (Guan Yanhua, Tian Wuling, Zhang Jianwu, et al. FEA coupler knuckle fatigue life of heavy-haul freight in Da-qing railway. Machine Design & Research, 2012, 28(3): 122-123 (in Chinese) doi: 10.3969/j.issn.1006-2343.2012.03.034

    Guan Yanhua, Tian Wuling, Zhang Jianwu, et al. FEA coupler knuckle fatigue life of heavy-haul freight in Da-qing railway. Machine Design & Research, 2012, 28(3): 122-123. (in Chinese)) doi: 10.3969/j.issn.1006-2343.2012.03.034
    [25]
    Vukšić Popović M, Tanasković J, Glišić D, et al. Experimental and numerical research on the failure of railway vehicles coupling links. Engineering Failure Analysis, 2021, 127: 105497 doi: 10.1016/j.engfailanal.2021.105497
    [26]
    Yao Y, Zhang XX, Zhang HJ, et al. The stability mechanism and its application to heavy-haul couplers with arc surface contact. Vehicle System Dynamics, 2013, 51(9): 1324-1341 doi: 10.1080/00423114.2013.801500
    [27]
    Infante V, Duarte P, Branco CM. Fatigue analysis of railway coupling joint. Engineering Failure Analysis, 2007, 14(6): 1175-1184 doi: 10.1016/j.engfailanal.2006.11.055
    [28]
    薛海. 基于实测载荷谱的重载货车车钩疲劳可靠性研究. [博士论文]. 北京: 北京交通大学, 2017

    Xue Hai. Study on fatigue reliability of heavy haul freight car couplings based on measured load spectrum. [PhD Thesis]. Beijing: Beijing Jiaotong University, 2017 (in Chinese))
    [29]
    Schijve J. Fatigue of Structures and Materials. Berlin: Springer Netherlands, 2009
    [30]
    丁然, 李强. 基于漏探概率的车轴探伤周期制定方法. 中国铁道科学, 2017, 38(4): 101-106 (Ding Ran, Li Qiang. Method for determining flaw detection period of axle based on missed detection probability. China Railway Science, 2017, 38(4): 101-106 (in Chinese) doi: 10.3969/j.issn.1001-4632.2017.04.14

    Ding Ran, Li Qiang. Method for determining flaw detection period of axle based on missed detection probability. China Railway Science, 2017, 38(4): 101-106. (in Chinese)) doi: 10.3969/j.issn.1001-4632.2017.04.14
    [31]
    李守新, 翁宇庆, 惠卫军等. 高强度钢超高周疲劳性能. 北京: 冶金工业出版社, 2010

    Li Shouxin, Wen Yuqing, Hui Weijun, et al. Very High Cycle Fatigue Properties of High Strength Steels. Beijing: Metallurgical Industry Press, 2010 (in Chinese))
    [32]
    Trapp A, Wolfsteiner P. Fatigue assessment of non-stationary random loading in the frequency domain by a quasi-stationary Gaussian approximation. International Journal of Fatigue, 2021, 148: 106214 doi: 10.1016/j.ijfatigue.2021.106214
    [33]
    Li FS, Wu H, Wu PB. Vibration fatigue dynamic stress simulation under non-stationary state. Mechanical Systems and Signal Processing, 2021, 146: 107006 doi: 10.1016/j.ymssp.2020.107006
  • Related Articles

    [1]Gao Zihan, Cheng Xiaoqi, Fan Ziye, Jiang Nan. INVESTIGATION ON THE DISTRIBUTION OF UNIFORM MOMENTUM ZONES WITH VARIABLE-INTERVAL SPATIAL AVERAGE DETECTION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(8): 2193-2202. DOI: 10.6052/0459-1879-24-098
    [2]Jiang Xin, Bai Zhengfeng, Ning Zhiyuan, Wang Siyu. INTERVAL UNCERTAINTY ANALYSIS METHODS FOR MULTIBODY SYSTEMS BASED ON SIGNAL DECOMPOSITION AND CHEBYSHEV POLYNOMIALS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(6): 1694-1705. DOI: 10.6052/0459-1879-22-092
    [3]Wu Shengchuan, Luo Yan, Wang Wenjing, Li Yongheng, Hu Chunming. FATIGUE STRENGTH AND RESIDUAL LIFETIME ASSESSMENT OF RAILWAY AXLES SUBJECTED TO FOREIGN OBJECT DAMAGE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(1): 84-95. DOI: 10.6052/0459-1879-20-228
    [4]Wu Pengge, Ni Bingyu, Jiang Chao. AN INTERVAL FINITE ELEMENT METHOD BASED ON THE NEUMANN SERIES EXPANSION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(5): 1431-1442. DOI: 10.6052/0459-1879-20-152
    [5]Wang Hao, Ke Shitang. EVOLUTION CHARACTERISTIC AND WORKING MECHANISM ANALYSIS OF ROTATING THIN-WALLED STRUCTURES IN POST-CRITICAL TURBULENT INTERVAL BASED ON FIELD MEASUREMENT[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(1): 111-123. DOI: 10.6052/0459-1879-18-125
    [6]Liu Jian, Lei Jirong, Xia Baizhan. THE INTERVAL ANALYSIS OF MULTILAYER-METAMATERIALS WITH PERFORATED APERTURES BASED ON CHEBYSHEV EXPANSION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(1): 137-148. DOI: 10.6052/0459-1879-16-254
    [7]Ji Xing. A CRITICAL REVIEW ON CRITERIA OF FRACTURE MECHANICS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(4): 741-753. DOI: 10.6052/0459-1879-16-069
    [8]Li Qi, Qiu Zhiping, Zhang Xudong. SECOND-ORDER PARAMETER PERTURBATION METHOD FOR DYNAMIC STRUCTURES WITH INTERVAL PARAMETERS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(1): 147-153. DOI: 10.6052/0459-1879-14-088
    [9]Qiu Zhiping Qi Wuchao. Collocation interval finite element method[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(3): 496-504. DOI: 10.6052/0459-1879-2011-3-lxxb2010-382
    [10]Weijie Li, Baolin Wang, Xinhong Zhang. Viscoelastic fracture of a functionally graded material strip[J]. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(3): 402-406. DOI: 10.6052/0459-1879-2008-3-2006-468
  • Cited by

    Periodical cited type(2)

    1. 龚海军,郭志启,李福军,钟发勇,高正源,孙鹏飞. 铸钢机车车钩精密铸造工艺及其凝固组织研究. 特种铸造及有色合金. 2024(09): 1291-1296 .
    2. 马建勇,马术文,张海柱,黎荣,肖鹏. 面向数字孪生的构架裂纹扩展寿命预测建模分析方法. 机械设计与研究. 2023(05): 172-177 .

    Other cited types(6)

Catalog

    Article Metrics

    Article views (812) PDF downloads (116) Cited by(8)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return