EI、Scopus 收录
中文核心期刊
Yang Tao, Zhaolin Fan, Jifei Wu. CFD based virtual flight simulation of square cross-section missile with control in longitudinal flight[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(2): 169-176. DOI: 10.6052/0459-1879-2010-2-2008-497
Citation: Yang Tao, Zhaolin Fan, Jifei Wu. CFD based virtual flight simulation of square cross-section missile with control in longitudinal flight[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(2): 169-176. DOI: 10.6052/0459-1879-2010-2-2008-497

CFD based virtual flight simulation of square cross-section missile with control in longitudinal flight

  • Received Date: August 24, 2008
  • Revised Date: July 06, 2009
  • The simulation of virtual flight based on computationalfluid dynamics (CFD) is now becoming possible together with theincorporation of a controller with control surface commands and controlsurface deflections. This paper investigates CFD-based virtual flight for ageneric square cross-section missile configuration in longitudinal motions.The incorporation of the flight mechanics equations and a controller intothe CFD solver loop, a multi-block structured-grid scheme with both thecontrol surface deformations and the rigid motion of the aircraft, aredescribed. This study is helpful to a wider effort towards the simulation ofguide and navigation, and validates flight stability in nonlinearaerodynamics regions. The virtual flight simulation of square sectionmissile with control in longitudinal flight are presentedincluding holding angle of attack and prescribed maneuver about incidencedecreasing with required angle. The availability of the coupling method andthe trim arithmetic are proved in the virtual flight simulations through thetwo typical maneuver actions.
  • Related Articles

    [1]Qian Zhihao, Ding Chensen, Xu Lingchen, Guo Chaoyang, Yu Yue, Luo Cijin, Liu Moubin. A HIGHLY EFFICIENT AND ACCURATE SURROGATE MODEL FOR FLUID-STRUCTURE INTERACTION WITH LIMITED DATA[J]. Chinese Journal of Theoretical and Applied Mechanics, 2025, 57(4): 803-815. DOI: 10.6052/0459-1879-25-059
    [2]Wang Chunpeng, Gao Ruxin, Lian Yanping, Cheng Zhanshan, Li Mingjian. A SELF-TRAINING CLASSIFICATION JUDGEMENT OPTIMIZATION METHOD FOR THE IMPACT-RESISTANT STRUCTURAL SIZE OPTIMIZATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(7): 1861-1875. DOI: 10.6052/0459-1879-24-057
    [3]Li Jianyu, Yang Kun, Wang Bo, Zhang Lili. A MAXIMUM ENTROPY APPROACH FOR UNCERTAINTY QUANTIFICATION OF INITIAL GEOMETRIC IMPERFECTIONS OF THIN-WALLED CYLINDRICAL SHELLS WITH LIMITED DATA[J]. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(4): 1028-1038. DOI: 10.6052/0459-1879-22-556
    [4]Cao Chong, Cheng Linsong, Zhang Xiangyang, Jia Pin, Shi Junjie. SEEPAGE PROXY MODEL AND PRODUCTION FORECAST METHOD BASED ON MULTIVARIATE AND SMALL SAMPLE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(8): 2345-2354. DOI: 10.6052/0459-1879-21-155
    [5]Dai Yuntong, Chen Zhenning, Zhu Feipeng, He Xiaoyuan. MEASUREMENT OF LÜDERS BAND IN SMALL SIZE LOW CARBON STEEL SPECIMEN BY 3D DIGITAL IMAGE CORRELATION METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(1): 119-126. DOI: 10.6052/0459-1879-14-175
    [6]Song Shufang, Lü Zhenzhou. THE ROBUST OPTIMIZATION DESIGN BASED ON MOMENT ESTIMATION METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, (4): 735-744. DOI: 10.6052/0459-1879-11-256
    [7]Jun Yan, Ling Liu, Xiaofeng Liu, Jiadong Deng. Concurrent hierarchical optimization for structures composed of modules considering size effects[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(2): 268-274. DOI: 10.6052/0459-1879-2010-2-2008-694
    [8]Fengtao Zhang, Kai Cui, Guowei Yang, Yuanyuan Cui. Optimization design of waverider based on the artificial neural networks[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(3): 418-424. DOI: 10.6052/0459-1879-2009-3-2008-422
    [9]Weihong Zhang, Gaoming Dai, Fengwen Wang, Shiping Sun, Hicham Bassir. Topology optimization of material microstructures using strain energy-based prediction of effective elastic properties[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 77-89. DOI: 10.6052/0459-1879-2007-1-2006-086
    [10]TOPOLOGY OPTIMIZATION OF TRUSS STRUCTURES BASED ON RELIABILITY 1)[J]. Chinese Journal of Theoretical and Applied Mechanics, 1998, 30(3): 277-284. DOI: 10.6052/0459-1879-1998-3-1995-127
  • Cited by

    Periodical cited type(0)

    Other cited types(2)

Catalog

    Article Metrics

    Article views (2061) PDF downloads (565) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return