EI、Scopus 收录
中文核心期刊
Zhenqing Wang. The asymptotic elastic-viscoplastic field at mode II dynamic propagating crack-tip[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(1): 76-83. DOI: 10.6052/0459-1879-2009-1-2007-345
Citation: Zhenqing Wang. The asymptotic elastic-viscoplastic field at mode II dynamic propagating crack-tip[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(1): 76-83. DOI: 10.6052/0459-1879-2009-1-2007-345

The asymptotic elastic-viscoplastic field at mode II dynamic propagating crack-tip

  • Received Date: July 16, 2007
  • Revised Date: June 29, 2008
  • Investigations on crack-tip stress-strain fields indifferent media are of engineering significance. The development of crack isdetermined by the mechanical state of high stress zone near crack tip due todynamic fracture failure as the major structural catastrophic form. Thestructure of crack tip field is complex and it is hard to get the solutionof asymptotic fields with the viscous effect. In the present paper, amechanical model is established in order to investigate the viscous effectin dynamic growing crack-tip field of mode II crack. Under the assumptionthat the viscosity coefficient is in inverse proportion to power law of theplastic equivalent strain rate, the elasticity, plasticity and viscosity ofmaterial at crack-tip can be matched reasonably by asymptotic analysis, andthe boundary conditions can be served as the supplementary conditions tosolve the growing crack-tip field. An elastic-viscoplastic asymptoticanalysis is carried out on the moving crack-tip fields in perfect plasticmaterials under plane-strain condition. A continuous solution withoutdiscontinuities is obtained And the variations of numerical solution formode II crack are discussed. It is shown that both stress and strain possessexponential singularity, and the tip field contains no elastic unloadingzone for mode II crack. By introducing Airy stress function, the governingequation of mode II quasi-static crack tip has been obtained and analyzednumerically. When the crack moving speed approaches zero, the quasi-staticsolution is recovered to show that the quasi-static solution is a specialcase of a dynamic one.
  • Related Articles

    [1]Wang Penghuan, Tang Mingkai, Wang Senlin. MECHANICAL PROPERTIES OF MULTI-LEVEL GYROID LATTICE STRUCTURES FABRICATED BY SELECTIVE LASER MELTING[J]. Chinese Journal of Theoretical and Applied Mechanics, 2025, 57(1): 148-161. DOI: 10.6052/0459-1879-24-283
    [2]Liu Hailin, Yi Min, Wang Jianxiang, Yi Xin. NUMERICAL SIMULATIONS OF POWDER SPREADING PROCESS IN SELECTIVE LASER MELTING AND POWDER LAYER CHARACTERIZATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(9): 1921-1938. DOI: 10.6052/0459-1879-22-589
    [3]Liu Yuewu, Fang Huijun, Li Longlong, Ge Tengze, Zheng Taiyi, Liu Danlu, Ding Jiuge. RECENT PROGRESS ON NUMERICAL RESEARCH OF KEY MECHANICAL PROBLEMS DURING UNDERGROUND COAL GASIFICATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(3): 669-685. DOI: 10.6052/0459-1879-22-331
    [4]Sun Sirui, Zhang Jie, Ni Mingjiu. THE NUMERICAL SIMULATION OF MELTING PROCESS IN A LATERAL HEATED CAVITY UNDER TRANSVERSE MAGNETIC FIELDS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(9): 2377-2386. DOI: 10.6052/0459-1879-22-155
    [5]Zhou You, Zeng Zhong, Liu Hao, Zhang Liangqi. EFFECT OF ASPECT RATIO ON THERMOCAPILLARY CONVECTION INSTABILITY OF GaAs MELT LIQUID BRIDGE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(2): 301-315. DOI: 10.6052/0459-1879-21-227
    [6]Sun Yuanyuan, Jiang Wugui, Xu Gaogui, Chen Tao, Mao Longhui. INFLUENCE OF ROUGH SURFACE OF DEPOSITED AREA ON QUALITY OF POWDER SPREADING DURING SELECTIVE LASER MELTING: DISCRETE ELEMENT SIMULATIONS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(12): 3217-3227. DOI: 10.6052/0459-1879-21-399
    [7]Chen Hui, Yan Wentao. DYNAMIC BEHAVIOURS OF POWDER PARTICLES IN SELECTIVE LASER MELTING ADDITIVE MANUFACTURING[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(12): 3206-3216. DOI: 10.6052/0459-1879-21-403
    [8]Yang Xiaodong, Shen Changyu, Li Qian. A SHEAR VISCOSITY MODEL OF POLYMER MELT CONSTRUCTED BY BEZIER CURVE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(2): 313-317. DOI: 10.6052/0459-1879-13-163
    [9]Yourong Li, Lan Peng, Shuangying Wu, Nobuyuki Imaishi. Bifurcation of thermocapillary convection in a shallow annular pool of silicon melt[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(1): 43-48. DOI: 10.6052/0459-1879-2007-1-2005-470
    [10]MELrING EFFECTS OF ALUMINUM BUAL-SHEET STRUCTURE IN HYPERVELOCITY IMPACT[J]. Chinese Journal of Theoretical and Applied Mechanics, 1995, 27(3): 257-266. DOI: 10.6052/0459-1879-1995-3-1995-432
  • Cited by

    Periodical cited type(5)

    1. 张晓阳,刘泽宇,赵飘. 泡沫金属经典本构模型表征三轴拉伸和拉压组合条件下宏观力学性能的研究. 南华大学学报(自然科学版). 2024(02): 66-72 .
    2. 刘彦,王百川,闫俊伯,闫子辰,时振清,黄风雷. 侵彻作用下负泊松比蜂窝夹芯结构动态响应. 兵工学报. 2023(07): 1938-1953 .
    3. 吴文旺,肖登宝,孟嘉旭,刘凯,牛迎浩,薛睿,张鹏,丁文杰,叶璇,凌雪,毕颖,夏勇. 负泊松比结构力学设计、抗冲击性能及在车辆工程应用与展望. 力学学报. 2021(03): 611-638 . 本站查看
    4. 贾然,赵桂平. 闭孔泡沫铝泊松比及三轴压缩变形模式. 力学学报. 2021(08): 2289-2297 . 本站查看
    5. 王立才. 机械制造中新型金属材料的应用研究. 南方农机. 2020(22): 116-117 .

    Other cited types(19)

Catalog

    Article Metrics

    Article views (2313) PDF downloads (521) Cited by(24)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return