EI、Scopus 收录
中文核心期刊
Comments on the calibration technique of the projected contact area of nanoindentation tester[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(5): 645-652. DOI: 10.6052/0459-1879-2005-5-2004-304
Citation: Comments on the calibration technique of the projected contact area of nanoindentation tester[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(5): 645-652. DOI: 10.6052/0459-1879-2005-5-2004-304

Comments on the calibration technique of the projected contact area of nanoindentation tester

  • The nanoindentation test techniques especially the O&P method are analyzed and the nanoindentation tests are implemented. The analysis focuses on the determination of the contact area and the depth region of the application. Analysis results show that a common area formula for all materials justified only at large indentation depth, and such a universal formula may lead to larger errors at small depth. Hence hardness values measured at small indentation depth based on O&P method must be used with care.
  • Related Articles

    [1]Yu Zhijie, Wei Yueguang. REVIEW ON THE RESEARCHES AND PROSPECT OF THE TRANS-SCALE INDENTATION SCALING LAW OF SOLIDS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(8): 2085-2100. DOI: 10.6052/0459-1879-22-273
    [2]Li Yabo, Song Qingyuan, Yang kai, Chen Yiping, Sun Chengqi, Hong Youshi. PROBABILISTIC CONTROL VOLUME METHOD FOR THE SIZE EFFECT OF SPECIMEN FATIGUE PERFORMANCE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(5): 1363-1371. DOI: 10.6052/0459-1879-19-118
    [3]Hua Jun, Wu Xiaxia, Duan Zhirong. NUMERICAL STUDY ON NANOINDENTATION OF DEFECTIVE BILAYER GRAPHENE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(4): 917-925. DOI: 10.6052/0459-1879-15-427
    [4]Li Weiwei, Yang Qingsheng, Liu Zhiyuan. NANOINDENTATION EXPERIMENT AND FINITE ELEMENT SIMULATION FOR BIOMECHANICAL BEHAVIOR OF RED BLOOD CELL[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012, (3): 614-621. DOI: 10.6052/0459-1879-2012-3-20120319
    [5]Shiping Sun, Weihong Zhang, Kepeng Qiu, Zhongze Guo, Bassir Hicham. Integrated topology optimization and scale effect analysis of cyclic symmetry sandwich structures[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(6): 788-795. DOI: 10.6052/0459-1879-2007-6-2006-518
    [6]Xiuyan Feng, Xianghua Guo, Daining Fang, Ziqiang Wang. Three-point microbend size effects for pure Ni foils[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(4): 479-485. DOI: 10.6052/0459-1879-2007-4-2006-274
    [7]研究了雷诺数Re=200, 1000, 线速度比α=0.5,[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(4): 466-471. DOI: 10.6052/0459-1879-2004-4-2003-021
    [10]Yurun Fan, . 挤出胀大流动的有限元方法研究[J]. Chinese Journal of Theoretical and Applied Mechanics, 1990, 22(3): 285-292. DOI: 10.6052/0459-1879-1990-3-1995-946

Catalog

    Article Metrics

    Article views (1873) PDF downloads (884) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return