Processing math: 100%
EI、Scopus 收录
中文核心期刊
Han Qiang, Qu zhan, Ye Zhengyin, Dong Guangjian. STUDY ON FRACTURE TOUGHNESS OF MODE I OF SHALE BASED ON MICRO-MECHANICAL TEST[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1245-1254. DOI: 10.6052/0459-1879-18-283
Citation: Han Qiang, Qu zhan, Ye Zhengyin, Dong Guangjian. STUDY ON FRACTURE TOUGHNESS OF MODE I OF SHALE BASED ON MICRO-MECHANICAL TEST[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 1245-1254. DOI: 10.6052/0459-1879-18-283

STUDY ON FRACTURE TOUGHNESS OF MODE I OF SHALE BASED ON MICRO-MECHANICAL TEST

  • Received Date: August 28, 2018
  • Fracture toughness of mode I (KIC) is one of the important mechanical parameters for hydraulic fracturing of shale gas reservoir. Due to the heterogeneity of shale composition, the conventional mechanical measurement has some problems such as large sample volume, discontinuous mechanical interpretation parameters, and low interpretation accuracy. One of the challenges is to obtain the fracture characteristics of shale in time to ensure the safety and efficiency of engineering construction. In this paper, research on fracture toughness of mode I of shale is performed based on micro-indentation. It can be used to study the mechanism of shale micro-crack initiation, development and formation of macro-crack, and to predict the macro-parameters of shale. Based on the analysis of multi-scale composition of shale, the fracture toughness tests with pyramid indenter (Vickers indenter and Berkovich indenter) were performed by micro-indentation. The relationship between residual indentation and indenter was evaluated, and the effect of experimental load on shale micro-fracture was analyzed. The optimization of indenter parameter also was discussed. The fracture toughness of shale is evaluated at meso-scale. The applicability of the micro-indentation test was evaluated, based on a comparative analysis with the results of the Brazil disc test. The results show that t the fluctuation of fracture toughness obtained by micro-indentation is slight when load is within the effective range. When load is too large, the fracture toughness of meso-scale is gradually reduced due to local drop-cuts on the indentation area. The average value of KIC obtained by micro-indentation is 0.86 MPam,and the average value obtained by Brazilian disc test is 0.92 MPam. The heterogeneity of shale composition results in more dispersed meso-mechancial measurement than macroscopic measurement. Micro-indentation test can be used to characterize shale fracture toughness of mode I and perform macroscopic prediction. It provides a new method for effectively solving shale gas hydraulic fracturing.
  • [1] 陈勉, 葛洪魁, 赵金洲 等. 页岩油气高效开发的关键基础理论与挑战. 石油钻探技术, 2015,43(5):7-14
    [1] ( Chen Mian, Ge Hongkui, Zhao Jinzhou , et al. The key fundamentals for the efficient exploitation of shale oil and gas and its related challenges. Petroleum Drilling Techniques, 2015,43(5):7-14 (in Chinese))
    [2] 李庆辉, 陈勉, 金衍 等. 页岩脆性的室内评价方法及改进. 岩石力学与工程学报, 2012,31(8):1680-1685
    [2] ( Li Qinghui, Chen Mian, Jin Yan , et al. Indoor evaluation method for shale brittleness and improvement. Chinese Journal of Rock Mechanics and Engineering, 2012,31(8):1680-1685 (in Chinese))
    [3] Lyu Q, Long XP, Ranjith PG , et al. Experimental investigation on the mechanical properties of a low-clay shale with different absorption times in sub-/super-critical CO2. Energy, 2018,147:1288-1298
    [4] Lyu Q, Long XP, Ranjith PG , et al. Experimental investigation on the mechanical behaviours of a low-clay shale under water-based fluids. Engineering Geology, 2018,233:124-138
    [5] 孙可明, 张树翠 . 含层理页岩气藏水力压裂裂纹扩展规律解析分析. 力学学报, 2016,48(5):1229-1237
    [5] ( Sun Keming, Zhang Shucui . Hydraulic fracture propagation in shale gas bedding reservoir analytical analysis. Chinese Journal of Theoretical and Applied Mechancis, 2016,48(5):1299-1237 (in Chinese))
    [6] 张财贵, 曹富, 李炼 等. 采用压缩单裂纹圆孔板确定岩石动态起裂、扩展和止裂韧度. 力学学报, 2016,48(3):624-635
    [6] ( Zhang Caigui, Cao Fu, Li Lian , et al. Determination of dynamic fracture initiation, propagation, and arrest toughness of rock using SCDC specimen. Chinese Journal of Theoretical and Applied Mechanics, 2016,48(3):624-635 (in Chinese))
    [7] 郑哲敏 . 关于中国页岩气持续开发工程科学研究的一点认识. 科学通报, 2016,61(1):34-35
    [7] ( Zheng Zhemin . A little understanding of the scientific research on the continuous development of shale gas in China. Science Bulletin, 2016,61(1):34-35 (in Chinese))
    [8] 谢和平, 高峰, 鞠杨 等. 页岩气储层改造的体破裂理论与技术构想. 科学通报, 2016,61(1):36-46
    [8] ( Xie Heping, Gao Feng, Ju Yang , et al. Volume fracture theory and technical conception of reforming shale gas reservoir. Science Bulletin, 2016,61(1):36-46 (in Chinese))
    [9] Farrokhrouz M, Asef MR, Kharrat R . Empirical estimation of uniaxial compressive strength of shale formations. Geophysics, 2014,79(4):227-233
    [10] 韩铁林, 师俊平, 陈蕴生 等. 轴、侧向同卸荷下砂岩力学特性影响的试验研究. 力学学报, 2016,48(4):936-943
    [10] ( Han Tielin, Shi Junping, Chen Yunsheng , et al. Experimental study on mechanics characteristics of sandstone under axial unloading and radial unloading path. Chinese Journal of Theoretical and Applied Mechanics, 2016,48(3):936-943 (in Chinese))
    [11] 陈勉, 金衍, 袁长友 . 围压条件下岩石断裂韧性的实验研究. 力学与实践, 2001,23(4):32-35
    [11] ( Chen Mian, Jin Yan, Yuan Changyou . Study on the experiment for fracture toughness under confining pressure. Mechanics in Engineering, 2001,23(4):32-35 (in Chinese))
    [12] 陈治喜, 陈勉 . 岩石断裂韧性与声波速度相关性的试验研究. 石油钻采工艺, 1997,19(5):56-60
    [12] ( Chen Zhixi, Chen Mian . Experimental study on the relationship between rock fracture toughness and acoustic velocity. Oil Drilling and Production Technology, 1997,19(5):56-60 (in Chinese))
    [13] 陈建国, 邓金根, 袁俊亮 等. 页岩储层I型和II型断裂韧性评价方法研究. 岩石力学与工程学报, 2015,34(6):1101-1105
    [13] ( Chen Jianguo, Deng Jinggen, Yuan Junliang , et al. Determination of fracture toughness of modes I and II of shale formation. Chinese Journal of Rock Mechanics and Engineering, 2015,34(6):1101-110 (in Chinese))
    [14] 陈勉, 金衍, 张广清 . 石油工程岩石力学. 北京: 科学出版社, 2008
    [14] ( Chen Mian, Jin Yan, Zhang Guangqing. Petroleum Engineering Rock Mechanics. Beijing: Science Press, 2008 (in Chinese))
    [15] Heng S, Guo YT, Yang CH , et al. Experimental and theoretical study of the anisotropic properties of shale. International Journal of Rock Mechanics and Mining Sciences, 2015,74(1):58-68
    [16] Liang L, Xiong J, Liu X . Experimental study on crack propagation in shale formations considering hydration and wettability. Journal of Natural Gas Science and Engineering, 2015,23:492-499
    [17] 何金钢, 康毅力, 游利军 等. 矿物成分和微结构对泥质岩储层应力敏感性的影响. 天然气地球科学, 2012,23(1):129-134
    [17] ( He Jingang, Kang Yili, You Lijun , et al. Effects of mineral composition and microstructure on stress-sensitivity of mudrocks. Natural Gas Geoscience, 2012,23(1):129-134 (in Chinese))
    [18] 夏英杰, 李连崇, 唐春安 等. 储层砂岩破坏特征与脆性指数相关性影响的试验及数值研究. 岩石力学与工程学报, 2017,36(1):10-28
    [18] ( Xia Yingjie, Li Lianchong, Tang Chunan , et al. Experiment and numerical research on failure characteristic and brittleness index for reservoir sandstone. Chinese Journal of Rock Mechanics and Engineering, 2017,36(1):10-28 (in Chinese))
    [19] 唐春安, 刘红元, 秦四清 等. 非均匀性对岩石介质中裂纹扩展模式的影响. 地球物理学报, 2000,43(1):116-121
    [19] ( Tang Chunan, Liu Hongyuan, Qin Siqing , et al. Influence of heterogeneity on crack propagation modes in brittle rock. Chinese Journal of Geophysics, 2000,43(1):116-121 (in Chinese))
    [20] 王士民, 朱合华, 冯夏庭 等. 细观非均匀性对脆性岩石材料宏观破坏形式的影响. 岩土力学, 2006,27(2):224-227
    [20] ( Wang Shimin, Zhu Hehua, Feng Xiating , et al. Influence of heterogeneity on macroscopical crack from the brittle rock. Rock and Soil Mechancis, 2006,27(2):224-227 (in Chinese))
    [21] 罗荣, 曾亚武, 杜欣 . 非均质岩石材料宏细观力学参数的关系研究. 岩土工程学报, 2012,34(12):2331-2336
    [21] ( Luo Rong, Zeng Yawu, Du Xin . Relationship between macroscopic and mesoscopic mechanical parameters of inhomogenous rock material. Journal of Geotechnical Engineering, 2012,34(12):2331-2336 (in Chinese))
    [22] 宋仲康, 马德军, 郭俊宏 等. 一种改进的纳米压入测试方法. 中国有色金属学报, 2012,22(2):520-525
    [22] ( Song Zhongkang, Ma Dejun, Guo Junhong , et al. A modified method of nanoindentation. The Chinese Journal of Nonferrous Metals, 2012,22(2):520-52 (in Chinese))
    [23] Gianpetro DP, Owen DR . Multiscaling in Molecular and Continuum Mechanics: Interaction of Time and Size from Macro to Nano. Netherlands: Springer, 2007
    [24] Zhang TH, Feng YH, Yang R , et al. A method to determine fracture toughness using cube-corner indentation. Scripta Materialia, 2010,62(4):199-201
    [25] 张海霞, 张泰华, 郇勇 . 纳米压痕和划痕法测定氧化硅薄膜材料的力学特性. 微纳电子技术, 2003,40(8):245-248
    [25] ( Zhang Haixia, Zhang Taihua, Xun Yong . Nanoindentation and nanoscratch measurements on the mechanical properties of SiO2 film. Micro/ Nano Electronic Technology, 2003,40(8):245-248 (in Chinese))
    [26] Zhu W, Hughes JJ, Bicanic N , et al. Nanoindentation mapping of mechanical properties of cement paste and natural rocks. Materials Characterization, 2007,58(11):1189-1198
    [27] Bobko C, Ulm FJ . The nano-mechanical morphology of shale. Mechanics of Materials, 2008,40(4):318-337
    [28] Sebastiani M, Johanns KE, Herbert EG , et al. Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges. Current Opinion in Solid State and Materials Science, 2015,19(6):324-333
    [29] 韩强, 屈展, 叶正寅 . 页岩多尺度力学特性研究现状. 应用力学学报, 2018,35(3):564-570
    [29] ( Han Qiang, Qu Zhan, Ye Zhengyin . Research status of shale multi-scale mechanical properties. Chinese Journal of Applied Mechanics, 2018,35(3):564-570 (in Chinese))
    [30] Evans AG, Charles EA . Fracture toughness determinations by indentation. Journal of the American Ceramic Society, 2010,59(7-8):371-372
    [31] Marshall DB, Evans AG . Reply to "Comment on Elastic/Plastic Indentation Damage in Ceramics: The Median/ Radial Crack System". Journal of the American Ceramic Society, 2010,64(12):C182-C183
    [32] Anderson TL. Fracture Mechanics-Fundamentals and Applications. CRC Press, 2015
    [33] Oore M, Burns DJ . Estimation of stress intensity factors for embedded irregular cracks subjected to arbitrary normal stress fields. Journal of Pressure Vessel Technology, 1980,102(102):202-211
    [34] Laugier MT . New formula for indentation toughness in ceramics. Journal of Materials Science Letters, 1987,6(3):355-356
    [35] Ouchterlony F . Stress intensity factors for the expansion loaded star crack. Engineering Fracture Mechanics, 1976,8(2):447-448
    [36] 刘向君, 熊健, 梁利喜 . 龙马溪组硬脆性页岩水化实验研究. 西南石油大学学报(自然科学版), 2016,38(3):178-186
    [36] ( Liu Xiangjun, Xiong Jian, Liang Lixi . Hydration experiment of hard brittle shale of the longmaxi formation. Journal of Southwest Petroleum University, 2016,38(3):178-186 (in Chinese))
    [37] Zolotnikova GS, Solovyev VV, Gogolinskiy KV , et al. Study of the effect of different sources on the combined error of;hardness measurements by the instrumented indentation method. Measurement Techniques, 2013,56(2):158-163
    [38] Chen P, Han Q, Tianshou MA , et al. The mechanical properties of shale based on micro-indentation test. Petroleum Exploration and Development, 2015,42(5):723-732
    [39] Atkinson C, Smelser RE, Sanchez J . Combined mode fracture via the cracked Brazilian disk test. International Journal of Fracture, 1982,18(4):279-291
  • Related Articles

    [1]Li Yilei, Yao Di, Qiao Hongwei, Li Xihua, Zhang Kun, Sun Lei, Yan Xiao, Li Pengzhou. DYNAMIC DUCTILE-BRITTLE TRANSITION AND FRACTURE TOUGHNESS MEASUREMENT OF METAL UNDER INTERMEDIATE-LOW LOADING VELOCITIES[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(2): 424-436. DOI: 10.6052/0459-1879-20-304
    [2]Liu Ming, Hou Dongyang, Gao Chenghui. STUDY ON FRACTURE TOUGHNESS OF SEMICONDUCTOR MATERIAL USING VICKERS AND BERKOVICH INDENTERS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(2): 413-423. DOI: 10.6052/0459-1879-20-349
    [3]Xie Yiling, Liu Ze. A GENERAL METHOD TO INTRODUCE PRE-CRACK IN BULK METALLIC GLASSES FOR PLANE STRAIN FRACTURE TOUGHNESS TEST[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(2): 392-399. DOI: 10.6052/0459-1879-19-377
    [4]Yu Han, Zhijun Liu, Yunfeng Wang, Yao Luo, Fengxia Liu, Xiaojuan Wang, Wei Wei, Xiaofei Xu. GAS-LIQUID TWO-PHASE FLOW REGIMES AND IMPACT FACTORS IN T-JUNCTION MICROREACTOR[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(2): 441-449. DOI: 10.6052/0459-1879-18-269
    [5]Zhang Caigui, Cao Fu, Li Lian, Zhou Yan, Huang Runqiu, Wang Qizhi. DETERMINATION OF DYNAMIC FRACTURE INITIATION, PROPAGATION, AND ARREST TOUGHNESS OF ROCK USING SCDC SPECIMEN[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(3): 624-635. DOI: 10.6052/0459-1879-15-349
    [6]Chen Shi, Tao Ying, Shen Shengqiang, Li Dewei. STATIC SPREADING OF DROPLET IMPACT ON SOLID SURFACE:INFLUENCE FACTOR[J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(3): 329-335. DOI: 10.6052/0459-1879-14-012
    [7]Xie-Quan LIU. Fracture toughness of eutectic ceramic composite[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(4): 682-690. DOI: 10.6052/0459-1879-2010-4-lxxb2009-228
    [8]Researches on the enhancement of fracture toughness induced by friction between crack faces[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(3): 280-286. DOI: 10.6052/0459-1879-2005-3-2003-331
    [9]THE EFFECTIVE FRACTURE TOUGHNESS OF MICROCRACKED BODIES 1)[J]. Chinese Journal of Theoretical and Applied Mechanics, 1998, 30(1): 109-115. DOI: 10.6052/0459-1879-1998-1-1995-105
    [10]TOUGHNESS INCREMENT BY CRACK GROWTH IN TOUGHENED STRUCTURAL MATERIALS[J]. Chinese Journal of Theoretical and Applied Mechanics, 1991, 23(1): 61-71. DOI: 10.6052/0459-1879-1991-1-1995-810
  • Cited by

    Periodical cited type(7)

    1. 谭鑫,胡跃刚,尹心,曹文贵. 颗粒离散元岩石模型的宏细观抗拉强度关联. 力学学报. 2024(05): 1411-1425 . 本站查看
    2. 陈立超,张典坤,吕帅锋,王生维. 海/陆相页岩微观力学性质压痕测试研究. 油气地质与采收率. 2022(06): 31-38 .
    3. 刘明,侯冬杨,高诚辉. 利用维氏和玻氏压头表征半导体材料断裂韧性. 力学学报. 2021(02): 413-423 . 本站查看
    4. 张安林,张朝鹏,李存宝,刘洋,艾婷,任利,郑良娟. 岩石断裂尺寸效应测试装置研制及实验研究. 实验力学. 2021(01): 69-79 .
    5. 陈立超,王生维. 煤岩断裂力学性质对储层压裂改造的影响. 天然气地球科学. 2020(01): 122-131 .
    6. 陈恳,黄波,王庆,王刚. 通过表面机械加工调控Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5非晶合金的结构和韧性. 力学学报. 2020(02): 400-407 . 本站查看
    7. 徐纪鹏,董新龙,付应乾,俞鑫炉,周风华. 不同加载边界下混凝土巴西劈裂过程及强度的DIC实验分析. 力学学报. 2020(03): 864-876 . 本站查看

    Other cited types(5)

Catalog

    Article Metrics

    Article views (1783) PDF downloads (103) Cited by(12)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return