| [1] | Hutchinson JW, Suo Z.Mixed mode cracking in layered materials.Advances in Applied Mechanics, 1991, 29: 63-191 | | [2] | Miller RA.Thermal barrier coatings for aircraft engines: History and directions.Journal of Thermal Spray Technology, 1997, 6(1): 35-42 | | [3] | Underwood JH, Park AP, Vigllante GN, et al.Thermal damage, cracking and rapid erosion of cannon bore coatings.Journal of Pressure Vessel Technology, 2003, 125(3): 299-304 | | [4] | 周益春,刘奇星,杨丽等.热障涂层的破坏机理与寿命预测.固体力学学报,2010, 31(5): 504-531 | | [4] | (Zhou Yichun, Liu Qixing, Yang Li, et al.Failure mechanisms and life prediction of thermal barrier coatings.Acta Mechanica Solida Sinica, 2010, 31(5): 504-531 (in Chinese)) | | [5] | 徐颖强, 孙戬, 李万钟等. 基于圆筒模型的热障涂层安定分析. 力学学报, 2015, 47(5): 779-788 | | [5] | (Xu Yinqiang, Sun Jian, Li Wangzhong, et al.Shakedown analysis of thermal barrier coatings based on cylinder model.Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(5): 779-788 (in Chinese)) | | [6] | Li HX, Chen GN, Zhang K, et al.Degradation failure features of chromium-plated gun barrels with a laser-discrete-quenched substrate.Surface and Coatings Technology, 2007, 201(24): 9558-9564 | | [7] | Li DJ, Tan M, Liu GQ, et al.Preparation and characterization of ZrB/AlN multilayers by N+ beam assisted deposition.Surface and Coatings Technology, 2011, 205(13-14): 3791-3797 | | [8] | Chen XG, Yang Y, Yan DR, et al.Microstructure and properties of in situ nanostructured ceramic matrix composite coating prepared by plasma spraying.Journal of Materials Science, 2011, 46(23): 7369-7376 | | [9] | 龚伟,周黎明,王恩泽等. Q235钢基体表面微晶玻璃功能梯度涂层接触应力的数值模拟.中国表面工程, 2014, 27(2): 46-51 | | [9] | (Gong Wei, Zhou Liming, Wang Enze, et al.Numerical simulation of the contact stress of functionally gradient glass-ceramic coatings on Q235 Ssteel.China Surface Engineering, 2014, 27(2): 46-51 (in Chinese)) | | [10] | 陈光南. 材料力学性能的激光调控. 中国激光,2011, 38(6): 43-53 | | [10] | (Chen Guangnan.Regulation of the mechanical properties of materials by laser.Chinese Journal of Lasers, 2011, 38(6): 43-53 (in Chinese)) | | [11] | Chen XJ, Yan Q, Ma Q.Influence of the laser pre-quenched substrate on an electroplated chromium coating/steel substrate.Applied Surface Science, 2017, 405: 273-279 | | [12] | Rizk AA.Stress intensity factor for an edge crack in two bonded dissimilar materials under convective cooling.Theoretical and Applied Fracture Mechanics, 2008, 49(3): 251-267 | | [13] | Zhou B, Kokini K.Effect of surface pre-crack morphology on the fracture of thermal barrier coatings under thermal shock.Acta Materialia, 2004, 52(14): 4189-4197 | | [14] | 李俊, 冯伟哲, 高效伟. 一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法. 力学学报, 2016, 48(2): 387-398 | | [14] | (Li Jun, Feng Weizhe, Gao Xiaowei.A dual boundary integral equation method based on direct evaluation of higher order singular integral for crack problems.Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(2): 387-398 (in Chinese)) | | [15] | Shen G, Glinka G.Determination of weight functions from reference stress intensity factors.Theoretical and Applied Fracture Mechanics, 1991, 15(3): 237-245 | | [16] | Fett T.Direct determination of weight functions from reference loading cases and geometrical conditions.Engineering Fracture Mechanics, 1992, 42(3): 435-444 | | [17] | Wu XR, Xu W.Strip yield crack analysis for multiple site damage in infinite and finite panels - A weight function approach.Engineering Fracture Mechanics, 2011, 78(14): 2585-2596 | | [18] | Chen XJ, You Y.Weight functions for multiple edge cracks in a coating.Engineering Fracture Mechanics, 2014, 116: 31-40 | | [19] | 童第华, 吴学仁, 胡本润等. 半无限板边缘裂纹的权函数解法与评价. 力学学报, 2017, 49(4): 848-857 | | [19] | (Tong Dihua, Wu Xueren, Hu Benrun, et al.Weight function methods and assessment for an edge crack in a semi-infinite plate.Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(4): 848-857 (in Chinese)) | | [20] | Jin XC, Zeng YJ, Ding SD, et al.Weight function of stress intensity factor for single radial crack emanating from hollow cylinder.Engineering Fracture Mechanics, 2017, 170: 77-86 | | [21] | Fett T, Diegele E, Munz D, et al.Weight functions for edge cracks in thin surface layers.International Journal of Fracture, 1996, 81(??): 205-215 | | [22] | Fett T, Munz D, Yang YY.Direct adjustment procedure for weight functions of graded materials.Fatigue & Fracture of Engineering Materials & Structures, 2000, 23(3): 191-198 | | [23] | Carslaw HS, Jaeger JC.Conduction of Heat in Solids. 2nd Ed. London: Oxford University Press, 1986 | | [24] | 谈庆明.量纲分析. 第1版. 合肥: 中国科学技术大学出版社, 2005 | | [24] | (Tan Qingming. Dimensional Analysis .1st Ed.Hefei: Press of University of Science and Technology of China, 2005 (in Chinese)) | | [25] | Boley BA, Weiner JH.Theory of Thermal Stresses. 1st Ed. New York:Dover Pulilication Inc., 2011 | | [26] | Bueckner HF.A novel principle for the computation of stress intensity factors. Zeitschrift für Angewandte Mathematik und Mechanik, 1970, 50(1): 529-546 | | [27] | Rice JR.Some remarks on elastic crack-tip stress fields. InternationalJournal of Solids and Structures, 1972, 8(6): 751-758 | | [28] | Wang BL, Mai YW, Zhang XH.Thermal shock resistance of functionally graded materials.Acta Materialia, 2004, 52(17): 4961-4972 | | [29] | ANSYS Release 11.0, ANSYS Inc., Canonsburg, Release 11.0, ANSYS Inc., Canonsburg, PA, 2009 | | [30] | Chen XJ, You Y.Weight functions for multiple axial cracks in a coated hollow cylinder.Archive of Applied Mechanics, 2015, 85(5): 617-628 |
|
本站查看
DownLoad: