EI、Scopus 收录
中文核心期刊
Guo Jiawen, Wei Cheng, Tan Chunlin, Zhao Yang. ANALYSIS OF THE CORED STRANDED WIRE ROPE ON THE NONLINEAR BENDING DYNAMIC CHARACTERISTICS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(2): 373-384. DOI: 10.6052/0459-1879-17-297
Citation: Guo Jiawen, Wei Cheng, Tan Chunlin, Zhao Yang. ANALYSIS OF THE CORED STRANDED WIRE ROPE ON THE NONLINEAR BENDING DYNAMIC CHARACTERISTICS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(2): 373-384. DOI: 10.6052/0459-1879-17-297

ANALYSIS OF THE CORED STRANDED WIRE ROPE ON THE NONLINEAR BENDING DYNAMIC CHARACTERISTICS

  • Received Date: August 31, 2017
  • When modeling the slender structures such as cable and tether with large flexibility, the complex twirling geometry in practical situation is usually ignored and the cable is simplified as a general beam with homogeneous material. In doing so, the result of dynamic simulation diverges from the physical significance. Therefore, this paper provides an equivalent dynamic method for the typical nonlinear helix wire strand considering the inner line contact under the static and large scale dynamic conditions. The variable bending stiffness affected by the contact friction and bending curvature is obtained through the equivalent constitutive law, by which the massive computation resulting from fine modeling method is able to be avoided. Based on the absolute nodal coordinate formulation, a series of the generalized coordinates have been selected to establish the dynamic differential equations. To verify the equivalent method, a fine strand model based on the finite segment element has been provided to test the accuracy according to the practical strand configuration. Furtherer, the distribution of the variable bending stiffness in practical strand under certain load is obtained through the quasi-static analysis. Compared with traditional ANCF model, the dynamic simulation of the one-tip-fixed equivalent beam under gravity coincides with the fact that the stiffness decreases as well as the flexibility increases in twirling strand. At last, the conversion among each kind of the energy component has been researched. The equivalent model of the twirling strand with large deformation can be used to improve the efficiency of the motion prediction in cable dynamic systems. Besides, the results provide the evidence for wire rope design.
  • [1] Leech C.The Modelling and Analysis of the Mechanics of Ropes. New York: Springer, 2014
    [2] Langlois S, Legeron F, Levesque F.Time history modeling of vibrations on overhead conductors with variable bending stiffness. IEEE Transactions on Power Delivery, 2014, 29(2): 607-614
    [3] Wang Z, Zhang L, Song J, et al.A novel approach for modeling and simulation of helix twisting structure based on mass-spring model. Advances in Mechanical Engineering, 2013, 5: 971251
    [4] 文浩, 陈辉, 金栋平等. 带可控臂绳系卫星释放及姿态控制. 力学学报, 2012, 44(2): 408-414
    [4] (Wen Hao, Chen Hui, Jin Dongping, et al.Deployment and attitude control of a tethered subsatellite with controllable arm. Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(2): 408-414 (in Chinese))
    [5] 蔡洪, 杨育伟, 郭才发. 电动力绳系研究进展. 宇航学报, 2014, 35(11): 1223-1232
    [5] (Cai Hong, Yang Yuwei, Guo Caifa.Review of electrodynamic tether system. Journal of Astronautics, 2014, 35(11): 1223-1232 (in Chinese))
    [6] 潘冬, 张越, 魏承等. 空间大型末端执行器绳索捕获动力学建模与仿真. 振动与冲击, 2015, 34(1): 74-79
    [6] (Pan Dong, Zhang Yue, Wei Cheng, et al.Dynamic modeling and simulation on rope capturing by space large end effector. Journal of Vibration and Shock, 2015, 34(1): 74-79 (in Chinese))
    [7] 刘延柱, 薛纭. 受拉扭弹性细杆超螺旋形态的定性分析. 物理学报, 2009, 58(9): 5936-5941
    [7] (Liu Yanzhu, Xue Yun.Qualitive analysis of supercoiling configuration of a thin elastic rod under tension and twist. Acta Physica Sinica, 2009, 58(9): 5936-5941 (in Chinese))
    [8] 刘延柱, 薛纭. 受圆柱面约束螺旋杆伸展为直杆的动力学分析. 力学学报, 2011, 43(6): 1151-1156
    [8] (Liu Yanzhu, Xue Yun.Dynamical analysis of structural process of helical rod to straight rod under constraint of cylinder. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(6): 1151-1156 (in Chinese))
    [9] Simo JC.A finite strain beam formulation. The three-dimensional dynamic problem. Part I. Computer Methods in Applied Mechanics and Engineering, 1985, 49(1): 55-70
    [10] Reissner E.On one-dimensional finite-strain beam theory: the plane problem. Zeitschrift für angewandte Mathematik und Physik ZAMP, 1972, 23(5): 795-804
    [11] Romero I.A comparison of finite elements for nonlinear beams: the absolute nodal coordinate and geometrically exact formulations. Multibody System Dynamics, 2008, 20(1): 51-68
    [12] Shabana AA.Definition of the slopes and the finite element absolute nodal coordinate formulation. Multibody System Dynamics, 1997, 1(3): 339-348
    [13] Shabana AA, Yakoub RY.Three dimensional absolute nodal coordinate formulation for beam elements: theory. Journal of Mechanical Design, 2001, 123(4): 606-613
    [14] Nachbagauer K, Gerstmayr J.Structural and continuum mechanics approaches for a 3D shear deformable ANCF beam finite element: Application to buckling and nonlinear dynamic examples. Journal of Computational and Nonlinear Dynamics, 2014, 9(1): 011-013
    [15] Ebel H, Matikainen MK, Hurskainen VV, et al.Higher-order beam elements based on the absolute nodal coordinate formulation for three-dimensional elasticity. Nonlinear Dynamics, 2017, 88(2): 1075-1091
    [16] Foti F.A corotational beam element and a refined mechanical model for the nonlinear dynamic analysis of cables. [PhD Thesis]. Milano: Doctoral Dissertation, Politecnico di Milano, 2013
    [17] Foti F, Martinelli L, Perotti F.Numerical integration of the equations of motion of structural systems undergoing large 3D rotations: Dynamics of corotational slender beam elements. Meccanica, 2015, 50(3): 751-765
    [18] Provasi R, Martins CDA.A three-dimensional curved beam element for helical components modeling. Journal of Offshore Mechanics and Arctic Engineering, 2014, 136(4): 041601
    [19] 张越, 赵阳, 谭春林等. ANCF 索梁单元应变耦合问题与模型解耦. 力学学报, 2016, 48(6): 1406-1415
    [19] (Zhang Yue, Zhao Yang, Tan Chunlin, et al.The strain coupling problem and model decoupling of ANCF cable/beam element. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(6): 1406-1415 (in Chinese))
    [20] Gnanavel B, Parthasarathy N.Effect of interfacial contact forces in radial contact wire strand. Archive of Applied Mechanics, 2011, 81(3): 303-317
    [21] Hong K-J, Yi C, Lee Y-K.Geometry and friction of helically wrapped wires in a cable subjected to tension and bending. International Journal of Steel Structures, 2012, 12(2): 233-242
    [22] Lalonde S, Guilbault R, Légeron F.Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts-Part I: Model formulation and validation. International Journal of Mechanical Sciences, 2017, 126: 281-296
    [23] Lalonde S, Guilbault R, Langlois S.Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts-Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors. International Journal of Mechanical Sciences, 2017, 126: 297-307
    [24] Hamper MB, Recuero AM, Escalona JL, et al.Use of finite element and finite segment methods in modeling rail flexibility: a comparative study. Journal of Computational and Nonlinear Dynamics, 2012, 7(4): 041-007
    [25] Spak K, Agnes G, Inman D.Cable modeling and internal damping developments. Applied Mechanics Reviews, 2013, 65(1): 010801
    [26] Hong K-J, Der Kiureghian A, Sackman JL.Bending behavior of helically wrapped cables. Journal of Engineering Mechanics, 2005, 131(5): 500-511
    [27] Lanteigne J.Theoretical estimation of the response of helically armored cables to tension, torsion, and bending. Journal of Applied Mechanics, 1985, 52(2): 423-432.
    [28] Costello GA.Theory of Wire Rope. New York: Springer Science & Business Media, 1997
    [29] Doocy ES, Hard AR, Rawlins CB, et al.Transmission Line Reference Book: Wind Induced Conductor Motion. Electric Power Research Institute, 2009
    [30] 过佳雯. 大变形柔性多体系统高效数值计算方法研究. [硕士论文]. 哈尔滨: 哈尔滨工业大学, 2016
    [30] (Guo Jiawen.Research on high efficient numerical algorithm of the flexible multibody dynamics with large deformation. [Master Thesis]. Harbin: Harbin Institute of Technology, 2016 (in Chinese))
  • Related Articles

    [1]Lu Hengxiao, Li Yan, Feng Zhiqiang. CALCULATION METHOD FOR VARIABLE FRICTION CONTACT WEAR BASED ON ADAPTIVE PENALTY FACTOR[J]. Chinese Journal of Theoretical and Applied Mechanics, 2025, 57(6): 1515-1528. DOI: 10.6052/0459-1879-25-012
    [2]Xing Haoran, He Yixiang, Dai Huliang, Wang Lin. DESIGN OF SIMPLY SUPPORT FOR FLUID-CONVEYING PIPE WITH COMPLEX CONFIGURATIONS BASED ON ABSOLUTE NODE COORDINATE FORMULATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(2): 482-493. DOI: 10.6052/0459-1879-23-383
    [3]Wu Maoqi, Tan Shujun, Gao Feixiong. SHAPE RECONSTRUCTION OF PLANE BEAM WITH FINITE DEFORMATION BASED ON ABSOLUTE NODAL COORDINATE FORMULATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(10): 2776-2789. DOI: 10.6052/0459-1879-21-338
    [4]Fan Jihua, Zhang Dingguo, Shen Hong. RESEARCH ON ELASTIC LINE METHOD BASED ON ABSOLUTE NODAL COORDINATE METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(5): 1455-1465. DOI: 10.6052/0459-1879-19-076
    [5]Hu Jingchen, Wang Tianshu. A RECURSIVE ABSOLUTE NODAL COORDINATE FORMULATION WITH O(n) ALGORITHM COMPLEXITY[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(5): 1172-1183. DOI: 10.6052/0459-1879-16-117
    [6]Xue Binghan, Lin Gao, Hu Zhiqiang, Pang Lin. ANALYSIS OF FRICTIONAL CONTACT PROBLEMS BY SBIGA-BDE METHOD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(3): 615-623. DOI: 10.6052/0459-1879-15-329
    [7]Wan Jun, Guo-jin Tang, Dao-kui Li. Shape design sensitivity analysis of elastoplastic frictional contact problems with finite deformation[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(4): 503-517. DOI: 10.6052/0459-1879-2009-4-2007-619
    [8]Jinyang Liu, Jiazhen Hong. Nonlinear formulation for flexible multibody system with large deformation[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 111-119. DOI: 10.6052/0459-1879-2007-1-2006-113
    [9]Hongnan Li, Jun Li, Gangbing Song. Improved suboptimal Bang-Bang control of aseismic buildings with variable friction dampers[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(1): 101-109. DOI: 10.6052/0459-1879-2007-1-2005-601
    [10]A METHOD FOR CALCULAIING THE DYNAMIC EFFECT OF DYNAMIC AND STATIC FRICTION ON A CONTACTABLE CRACK[J]. Chinese Journal of Theoretical and Applied Mechanics, 1994, 26(4): 494-502. DOI: 10.6052/0459-1879-1994-4-1995-573

Catalog

    Article Metrics

    Article views (1453) PDF downloads (461) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return