EI、Scopus 收录
中文核心期刊
Quick Search Issue Search Advanced Search
Volume 49 Issue 6
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Gan Yunhua, Jiang Zhengwei, Li Haige. A STUDY ON DROPLET VELOCITY OF ETHANOL DURING ELECTROSPRAYING PROCESS AT CONE-JET MODE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(6): 1272-1279. DOI: 10.6052/0459-1879-17-226
Citation: Gan Yunhua, Jiang Zhengwei, Li Haige. A STUDY ON DROPLET VELOCITY OF ETHANOL DURING ELECTROSPRAYING PROCESS AT CONE-JET MODE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2017, 49(6): 1272-1279. DOI: 10.6052/0459-1879-17-226
shu

A STUDY ON DROPLET VELOCITY OF ETHANOL DURING ELECTROSPRAYING PROCESS AT CONE-JET MODE

  • School of Electric Power, South China University of Technology, Guangzhou 510640, China

  • Guangdong Province Engineering Research Center of High Efficient and Low Pollution Energy Conversion, Guangzhou 510640, China

  • Received Date: June 19, 2017
  • Available Online: September 26, 2017
    Graphical Abstract
    • Abstract
  • An analysis on the velocity characteristics of droplets generated from electrospraying is the key to understand the formation and evolution of the spray shape. Combining with the experimental results of ethanol electrospraying at cone-jet mode, a two-dimensional axisymmetric model of electrospraying was established. Based on the droplet motion equations, air motion equations, electric field equations and user-defined functions, the model was numerically solved to obtain the spray morphology, the space electric field distribution and the droplet velocity field distribution at cone-jet mode. The effect of air inlet velocity on the spray shape and velocity field distribution of ethanol/air coaxial jet was also discussed. The results indicate that the air flow field has a strong interaction with the droplets at the periphery of the spray, leading to a smooth variation of the droplet velocity distribution near the axis of the spray, while the droplet velocity distribution at the periphery of the spray varies drastically along the radial direction. As the coaxial air inlet velocity increases, the spray shape tends to diverge first. But when the air inlet velocity increases to be greater than the axial velocity of the spray droplets, the spray shape tends to gather. Therefore, in addition to changing the applied voltage, liquid flow rate or electrode pattern, controlling the air inlet velocity to affect the spray velocity field can be an efficient way to control the electrospraying.
    • FullText(HTML)
    • References (35)
  • [1]
    刘赵淼, 杨洋.几何构型对流动聚焦生成微液滴的影响.力学学报, 2016, 48(4):867-876 http://manu61.magtech.com.cn/lxxb/CN/abstract/abstract145929.shtml

    Liu Zhaomiao, Yang Yang. Influence of geometry configurations on the microdroplets in flow focusing microfluidics. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(4):867-876 (in Chinese) http://manu61.magtech.com.cn/lxxb/CN/abstract/abstract145929.shtml
    [2]
    阎凯, 宁智, 吕明等.圆环旋转黏性液体射流破碎液滴粒径与速度数量密度分布相关性研究.力学学报, 2016, 48(3):566-575 http://manu61.magtech.com.cn/lxxb/CN/abstract/abstract145834.shtml

    Yan Kai, Ning Zhi, Lü Ming, et al. Study on correlation of breakup droplet size and velocity distributions of an annular swirling viscous liquid sheet. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(3):566-575 (in Chinese) http://manu61.magtech.com.cn/lxxb/CN/abstract/abstract145834.shtml
    [3]
    Rietveld IB, Kobayashi K, Yamada H, et al. Electrospray deposition, model, and experiment:Toward general control of film morphology. Journal of Physical Chemistry B, 2006, 110(46):23351-23364 doi: 10.1021/jp064147+
    [4]
    Kim JW, Yamagata Y, Kim BJ, et al. Direct and dry micro-patterning of nano-particles by electrospray deposition through a micro-stencil mask. Journal of Micromechanics and Microengineering, 2009, 19(2):025021 doi: 10.1088/0960-1317/19/2/025021
    [5]
    Oh H, Kim K, Kim S. Characterization of deposition patterns produced by twin-nozzle electrospray. Journal of Aerosol Science, 2008, 39(9):801-813 doi: 10.1016/j.jaerosci.2008.05.003
    [6]
    Temperton RH, O'Shea JN, Scurr DJ. On the suitability of high vacuum electrospray deposition for the fabrication of molecular electronic devices. Chemical Physics Letters, 2017, 682:15-19 doi: 10.1016/j.cplett.2017.05.068
    [7]
    Hsu RY, Liao JH, Tien HW, et al. Gas chromatography electrospray ionization mass spectrometry analysis of trimethylsilyl derivatives. Journal of Mass Spectrometry, 2016, 51(10):883-888 doi: 10.1002/jms.3796
    [8]
    Nguyen DN, Clasen C, Van den Mooter G. Encapsulating darunavir nanocrystals within Eudragit L100 using coaxial electrospraying. European Journal of Pharmaceutics and Biopharmaceutics, 2017, 113(Sup C):50-59 http://www.sciencedirect.com/science/article/pii/S0939641116309298
    [9]
    Khan MKI, Nazir A, Maan AA. Electrospraying:a novel technique for efficient coating of foods. Food Engineering Reviews, 2017, 9(2):112-119 doi: 10.1007/s12393-016-9150-6
    [10]
    Gibbons MJ, Robinson AJ. Heat transfer characteristics of single cone-jet electrosprays. International Journal of Heat and Mass Transfer, 2017, 113:70-83 doi: 10.1016/j.ijheatmasstransfer.2017.04.119
    [11]
    Gan YH, Tong Y, Ju YG, et al. Experimental study on electrospraying and combustion characteristics in meso-scale combustors. Energy Conversion and Management, 2017, 131:10-17 doi: 10.1016/j.enconman.2016.11.015
    [12]
    Gan YH, Luo ZB, Cheng YP, et al. The electro-spraying characteristics of ethanol for application in a small-scale combustor under combined electric field. Applied Thermal Engineering, 2015, 87:595-604 doi: 10.1016/j.applthermaleng.2015.05.046
    [13]
    Higuera FJ, Tejera JM. Vaporization and gas-phase combustion of electrosprayed heptane in a small chamber. Combustion and Flame, 2017, 177:144-154 doi: 10.1016/j.combustflame.2016.12.015
    [14]
    尹协振, 李芳.电雾化、电纺丝和带电射流稳定性研究.力学与实践, 2009, 41(1):1-7

    Yin Xiezhen, Li Fang. Electrospraying, electrospining and instability of electrified jets. Mechanics in Engineering, 2009, 41(1):1-7 (in Chinese)
    [15]
    Herrada MA, Lopez-Herrera JM, Ganan-Calvo AM, et al. Numerical simulation of electrospray in the cone-jet mode. Physical Review E-Statistical, Nonlinear, and Soft Matter Physics, 2012, 86(2Pt 2):026305 http://adsabs.harvard.edu/abs/2012PhRvE..86b6305H
    [16]
    Li JL. On the stability of electrohydrodynamic spraying in the conejet mode. Journal of Electrostatics, 2007, 65(4):251-255 doi: 10.1016/j.elstat.2006.08.006
    [17]
    Rahman K, Ko JB, Khan S, et al. Simulation of droplet generation through electrostatic forces. Journal of Mechanical Science and Technology, 2010, 24(1):307-310 doi: 10.1007/s12206-009-1149-y
    [18]
    王晓英, 闻建龙.静电雾化锥射流模式下液锥形态的研究.实验力学, 2013, 28 (3):347-351 doi: 10.7520/1001-4888-12-097

    Wang Xiaoying, Wen Jianlong. Study of liquid cone shape in electrostatic atomization cone-jet mode. Journal of Experimental Mechanics, 2013, 28(3):347-351 (in Chinese) doi: 10.7520/1001-4888-12-097
    [19]
    汪朝晖, 蒋圣伟, 高全杰.静电喷雾轴对称锥射流模型与数值模拟.农业机械学报, 2013, 44(8):84-89 doi: 10.6041/j.issn.1000-1298.2013.08.015

    Wang Zhaohui, Jiang Shengwei, Gao Quanjie. Axisymmetric cone-jet model and numerical simulation for electrostatic spraying. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(8):84-89 (in Chinese) doi: 10.6041/j.issn.1000-1298.2013.08.015
    [20]
    Rahmanpour M, Ebrahimi R. Numerical simulation of electrohydrodynamic spray with stable Taylor cone-jet. Heat and Mass Transfer, 2016, 52(8):1595-1603 doi: 10.1007/s00231-015-1680-6
    [21]
    Wei W, Gu ZL, Wang S, et al. Numerical simulation of the cone-jet formation and current generation in electrostatic spray-modeling as regards space charged droplet effect. Journal of Micromechanics & Microengineering, 2013, 23(1):15004-15014(11) http://adsabs.harvard.edu/abs/2013JMiMi..23a5004W
    [22]
    Hartman RPA, Brunner DJ, Camelot DMA, et al. Jet break-up in electrohydrodynamic atomization in the cone-jet mode. Journal of Aerosol Science, 2000, 31(1):65-95 doi: 10.1016/S0021-8502(99)00034-8
    [23]
    李广滨, 司廷, 尹协振.电场作用下无黏聚焦射流的时间不稳定性研究.力学学报, 2012, 44(5):876-883 doi: 10.6052/0459-1879-12-032

    Li Guangbin, Si Ting, Yin Xiezhen. Temporal instability study of inviscid focused jets under an electric field. Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(5):876-883 (in Chinese) doi: 10.6052/0459-1879-12-032
    [24]
    Gañán-Calvo AM, Lasheras JC, Dávila J, et al. The electrostatic spray emitted from an electrified conical meniscus. Journal of Aerosol Science, 1994, 25(6):1121-1142 doi: 10.1016/0021-8502(94)90205-4
    [25]
    Hartman RPA, Borra JP, Brunner DJ, et al. The evolution of electrohydrodynamic sprays produced in the cone-jet mode, a physical model. Journal of Electrostatics, 1999, 47(3):143-170 doi: 10.1016/S0304-3886(99)00034-0
    [26]
    Tang K, Gomez A. On the structure of an electrostatic spray of monodisperse droplets. Physics of Fluids, 1994, 6(6):2317-2332 http://adsabs.harvard.edu/abs/1994PhFl....6.2317T
    [27]
    Gañán-Calvo AM, Dávila J, Barrero A. Current and droplet size in the electrospraying of liquids. Scaling laws. Journal of Aerosol Science, 1997, 28(2):249-275 doi: 10.1016/S0021-8502(96)00433-8
    [28]
    Gan YH, Zhang X, Li HG, et al. Effect of a ring electrode on the cone-jet characteristics of ethanol in small-scale electro-spraying combustors. Journal of Aerosol Science, 2016, 98:15-29 doi: 10.1016/j.jaerosci.2016.05.001
    [29]
    Gan YH, Zhang X, Li HG, et al. The atomization current and droplet size of ethanol in two different small-scale electro-spraying systems. Journal of Electrostatics, 2017, 87:228-235 doi: 10.1016/j.elstat.2017.05.003
    [30]
    陈效鹏, 王清华.多毛细管稳定喷洒电雾化特征研究(一)——实验设备设计及粒径测量方法.实验力学, 2011, 26(6):692-698

    Chen Xiaopeng, Wang Qinghua. On the multi-capillary stable electrical atomization spray characteristics(I)-Experimental device design and particle size measuring method. Journal of Experimental Mechanics, 2011, 26(6):692-698 (in Chinese)
    [31]
    刘明明, 陈效鹏, 徐晓建.多毛细管电雾化喷洒模式及稳定喷洒特征研究.力学学报, 2010, 42(3):567-571 doi: 10.6052/0459-1879-2010-3-2009-126

    Liu Mingming, Chen Xiaopeng, Xu Xiaojian. Experimental study on electrospray modes and steady spray characteristics with multiple metal capillaries. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(3):567-571 (in Chinese) doi: 10.6052/0459-1879-2010-3-2009-126
    [32]
    王清华, 陈效鹏, 赵梦华.多毛细管稳定喷洒电雾化特征研究(二)——电压、电流、粒径与流量的关系.实验力学, 2012, 27 (1):102-107 http://d.wanfangdata.com.cn/Periodical/sylx201201013

    Wang Qinghua, Chen Xiaopeng, Zhao Menghua. On the multi-capillary stable electrical atomization spray characteristics (Ⅱ)-Relation among voltage/current/droplet size and flow rate. Journal of Experimental Mechanics, 2012, 27 (1):102-107 (in Chinese) http://d.wanfangdata.com.cn/Periodical/sylx201201013
    [33]
    Zhang J, He HZ. The motion behavior of a group of charged droplets in liquid-liquid electrostatic spray. Flow Turbulence and Combustion, 2012, 89(4):675-689 doi: 10.1007/s10494-012-9417-9
    [34]
    Arumugham-Achari AK, Grifoll J, Rosell-Llompart J. A comprehensive framework for the numerical simulation of evaporating electrosprays. Aerosol Science and Technology, 2015, 49(6):436-448 doi: 10.1080/02786826.2015.1039639
    [35]
    Yi TX. Laser diagnostics of an evaporating electrospray. Experiments in Fluids, 2014, 55(1):1642 doi: 10.1007/s00348-013-1642-z
    • Related Articles

  • Related Articles

    [1]Yan A’min, Qiao Yu, Dai Lanhong. FORMATION AND STABILITY OF SHAPED CHARGE LINER JET OF CrMnFeCoNi HIGH-ENTROPY ALLOY[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(8): 2119-2130. DOI: 10.6052/0459-1879-22-274
    [2]Liu Chuanzhen, Bai Peng, Wang Jifei, Liu Qiang. OSCULATING-CONE WAVERIDER DESIGN BY CUSTOMIZING THE PLANFORM SHAPE OF LEADING EDGE[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(4): 991-997. DOI: 10.6052/0459-1879-18-368
    [3]Yan Kai, Ning Zhi, Lü Ming, Sun Chunhua, Fu Juan, Li Yuanxu. STUDY ON CORRELATION OF BREAKUP DROPLET SIZE AND VELOCITY DISTRIBUTIONS OF AN ANNULAR SWIRLING VISCOUS LIQUID SHEET[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(3): 566-575. DOI: 10.6052/0459-1879-15-084
    [4]Song Yunchao, Ning Zhi, Sun Chunhua, Lü Ming, Yan Kai, Fu Juan. MOVEMENT AND SPLASHING OF A DROPLET IMPACTING ON A WET WALL[J]. Chinese Journal of Theoretical and Applied Mechanics, 2013, 45(6): 833-842. DOI: 10.6052/0459-1879-13-053
    [5]LIU Ming-Ming, CHEN Xiao-Peng, XU Xiao-Jian. Experimental study on electrospray modes and steady spray characteristics with multiple metal capillaries[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(3): 567-571. DOI: 10.6052/0459-1879-2010-3-2009-126
    [6]Adjoint Shape Sensitivity Analysis Based On Generalized Variational[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(3): 288-295. DOI: 10.6052/0459-1879-2004-3-2003-220
    [7]RELATIONSHIP BETWEEN PENETRATION AND SHAPE OF FALLING DROP[J]. Chinese Journal of Theoretical and Applied Mechanics, 1996, 28(4): 489-492. DOI: 10.6052/0459-1879-1996-4-1995-359
    [8]EXPERIMENTAL STUDY OF MECHANICAL BEHAVIOUR OF TiTi SHAPE MEMORYALLOY[J]. Chinese Journal of Theoretical and Applied Mechanics, 1995, 27(5): 587-596. DOI: 10.6052/0459-1879-1995-5-1995-470
    [9]THE CONCEPT OF PRINCIPAL MODE SHAPES AND THE MEASURES OF CONTROLLABILITY AND OBSERVABILITY FOR MODE SHAPES WITH REPEATED FREQUENCIES[J]. Chinese Journal of Theoretical and Applied Mechanics, 1994, 26(4): 424-431. DOI: 10.6052/0459-1879-1994-4-1995-564
    [10]THE CONE-SHAPED VORTEXX STRUCTURE IN FLAT PLATE BOUNDARY AYER[J]. Chinese Journal of Theoretical and Applied Mechanics, 1994, 26(1): 121-127. DOI: 10.6052/0459-1879-1994-1-1995-529

  • Cited by

    Periodical cited type(10)

    1. 黄星，甘云华，敖文，赵明涛，罗燕来，江政纬，陈宁光. 直流电场对AP/HTPB/Al复合固体推进剂燃烧特性的影响. 推进技术. 2023(01): 270-278 .
    2. 黄然，程洋，刘馨悦，徐日泰，俞建峰，钱陈豪. 基于EHD的射流稳定性机理分析与实验研究. 微纳电子技术. 2023(01): 124-130+164 .
    3. 陈宁光，甘云华. 基于格子Boltzmann方法的荷电液滴蒸发及传热研究. 化工学报. 2023(12): 4829-4839 .
    4. 霍元平，张聪，刘海龙，左子文，王军锋. 电场作用下乙醇的稳定多股射流现象. 科学通报. 2020(11): 1046-1054 .
    5. 郑高杰，王军锋，霍元平，张伟，李金. 采用粒子图像测速技术测量的预混式双流体静电雾化流场特性. 高电压技术. 2020(04): 1465-1472 .
    6. 霍元平，王军锋，左子文，刘海龙. 滴状模式下液桥形成及断裂的电流体动力学特性研究. 力学学报. 2019(02): 425-431 . 本站查看
    7. 刘赵淼，徐元迪，逄燕，任彦霖，高山山，钟希祥. 压电式微滴按需喷射的过程控制和规律. 力学学报. 2019(04): 1031-1042 . 本站查看
    8. 周思引，聂万胜，车学科，仝毅恒，郑体凯. 非平衡等离子体对甲烷–氧扩散火焰影响的实验研究. 力学学报. 2019(05): 1336-1349 . 本站查看
    9. 刘赵淼，王凯峰，王治林，郑会龙，张谭，康振亚. 阶梯型加速段对旋流喷嘴雾化特性的影响. 力学学报. 2018(03): 570-578 . 本站查看
    10. 吴健，张蒙齐，田方宝. 三维方腔介电液体电对流的数值模拟研究. 力学学报. 2018(06): 1458-1469 . 本站查看

    Other cited types(6)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (1097) PDF downloads (286) Cited by(16)
    Related

    Download Center

    Author Center

    Copyright © Editorial Office of the Chinese Journal of Mechanics   京ICP备05039218号-1

    Address：15 Beishihuan Xi Lu, Haidian District, Beijing, China   China Pos：100190

    Tel：010-62536271

    Email：lxxb@cstam.org.cn

    微信公众号
    RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return