旋转中心刚体-FGM梁刚柔热耦合动力学特性研究

范纪华; 陈立威; 王明强; 章定国; 杜超凡

doi:10.6052/0459-1879-19-241

旋转中心刚体-FGM梁刚柔热耦合动力学特性研究

doi: 10.6052/0459-1879-19-241

范纪华^*2), ,,
陈立威^*,
王明强^*,
章定国^†,
杜超凡^**

^* 江苏科技大学机械工程学院, 江苏镇江212003
^† 南京理工大学理学院, 南京210094
^** 扬州大学建筑科学与工程学院, 江苏扬州 225127

基金项目: 1) 国家自然科学基金(11502098);1) 国家自然科学基金(11772158);1) 国家自然科学基金(11802263);江苏省自然科学基金(BK20180895);江苏省高校自然科学研究面上项目(15KJB130003);江苏科技大学博士科研启动基金资助项目(120140003)

详细信息

通讯作者:
范纪华

中图分类号: O313.7
计量
- 文章访问数: 998
- HTML全文浏览量: 145
- PDF下载量: 90
- 被引次数: 0
出版历程
- 收稿日期: 2019-08-28
- 刊出日期: 2019-11-18

RESEARCH ON DYNAMICS OF A RIGID-FLEXIBLE-THERMAL COUPLING ROTATING HUB-FGM BEAM

^* School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, China
^† School of Sciences, Nanjing University of Science and Technology, Nanjing 210094, China
^** College of Civil Science and Engineering, Yangzhou University, Yangzhou 225127, Jiangsu, China

摘要

摘要: 对旋转中心刚体-功能梯度材料(functionally graded material,FGM)梁刚柔热耦合动力学特性进行研究.FGM梁为物理性能参数沿厚度方向呈幂律分布的欧拉伯努利梁.考虑柔性梁的横向弯曲变形和轴向拉伸变形, 并计入横向弯曲变形引起的纵向缩短,即非线性耦合变形量.考虑变截面空心梁在外部高温、内冷通道冷却情况下的热力耦合对系统动力学特性的影响,求解得到FGM梁沿厚度方向分布的温度场, 进而在本构关系中计入热应变.采用假设模态法对柔性梁变形场进行离散,运用第二类拉格朗日方程推导得到系统的刚柔热耦合动力学方程,并编制动力学仿真软件, 然后通过仿真算例对系统的动力学问题进行研究.结果表明:不同截面梁动力学响应差异较大, 因此需对实际系统合理建模;大范围运动已知时, 考虑热冲击载荷的FGM梁将有效抑制横向弯曲变形,而大范围运动恒定时随热冲击的叠加会出现高频振荡; 大范围运动未知时,外力矩和热冲击载荷相互作用产生热力耦合效应, 导致系统呈现高频振荡,同时与中心刚体大范围旋转运动产生刚柔热耦合效应.
- 功能梯度材料 /
- 变截面空心梁 /
- 刚柔热耦合 /
- 动力学仿真
Abstract: The rigid-flexible-thermal coupling dynamics of the hub-FGM beam system under large overall rotating motion is studied. The FGM beam is an Euler-Bernoulli beam, and its physical properties follow certain kinds of power law gradient distribution and vary in the thickness direction. The longitudinal deformation and the transverse deformation of the flexible beam are considered and the coupling term of the deformation which is caused by transverse deformation of the flexible beam is included in the expression of longitudinal deformation. Considering the influence of the thermal coupling of the tapered hollow beam which is under the condition of external high temperature and internal cooling passage cooling on the dynamic characteristics of the system, the temperature field distributed along the thickness direction of the FGM beam is obtained, and the thermal strain is included in the constitutive relationship of the beam. By using the assumed mode method to describe the deformation of the beam, the rigid-flexible-thermal coupling dynamic equations of the system are derived via employing Lagrange's equations of the second kind, as well as to compile the dynamics simulation software. Then the dynamics of the system are studied through simulation examples. The results show that the dynamic response of beams with different sections is quite different, so it is necessary to model the actual system reasonably. When the large overall rotating motion is known, the FGM beam considering the thermal shock load will effectively suppress the transverse bending deformation, and the high-frequency oscillation will occur with the superposition of the thermal shock when the large overall rotating motion is constant; When the large overall rotating motion is unknown, the external torque and the thermal shock load interact to produce a thermal coupling effect, which causes the system to exhibit high-frequency oscillation, at the same time , the rigid-flexible thermal coupling effect of the hub-FGM beam system is appeared.
- functionally graded material /
- tapered hollow beam /
- rigid-flexible-thermal coupling /
- dynamic simulation

HTML全文

参考文献(1)

1	Koizumi M. FGM activities in Japan. Composites Part B: Engineering, 1997,28(1-2):1-4
2	贾广森, 张丽, 卢聪明等. 内冷通道横流条件下气膜冷却特性. 航空动力学报, 2015,30(4):823-830
2	( Jia Guangseng, Zhang Li, Lu Congming, et al. Film cooling performance with internal coolant channel crossflow. Journal of Aerospace Power, 2015,30(4):823-830 (in Chinese))
3	李广超, 莫唯书, 张魏等. 涡轮导向叶片综合冷却特性实验研究. 推进技术, 2018,39(12):2772-2778
3	( Li Guangchao, Mo Weishu, Zhang Wei, et al. Experimental investigation on integrated colling performance of nozzle guide vane. Journal of Propulsion Technology, 2018,39(12):2772-2778 (in Chinese))
4	史晓军, 税琳棋, 高建民等. 汽雾两相流强化冷却燃气轮机叶片内冷通道. 航空动力学报, 2015,30(11):2561-2567
4	( Shi Xiaojun, Shui Linqi, Gao Jianmin, et al. Internal cooling passage of mist/steam two-phase flow enhanced cooling gas turbine blade. Journal of Aerospace Power, 2015,30(11):2561-2567 (in Chinese))
5	Chowdhury NHK, Qureshi SA, Zhang M, et al. Influence of turbine blade leading edge shape on film cooling with cylindrical holes. International Journal of Heat and Mass Transfer, 2017,115:895-908
6	Fan X, Li L, Zou J, et al. Local heat transfer of vortex cooling with multiple tangential nozzles in a gas turbine blade leading edge cooling passage. International Journal of Heat and Mass Transfer, 2018,126:377-389
7	李彦霖, 饶宇, 王德强 . 涡轮叶片冷却通道高性能微小肋湍流传热的数值研究. 工程热物理学报, 2018,39(10):161-169
7	( Li Yanlin, Rao Yu, Wang Deqiang, Numerical study on turbulent heat transfer of miniature ribs in turbine blade internal passage. Journal of Aerospace Power, 2018,39(10):161-169 (in Chinese))
8	邱庆刚, 沈胜强 . 肋片几何形状对仿螺旋肋片内冷通道流动与换热的影响. 航空动力学报, 2006,21(1):71-76
8	( Qiu Qinggang, Shen Shengqiang, Effect of Helix-Alike fin surface shape on flow and heat transfer in the internal cooling passage. Journal of Aerospace Power, 2006,21(1):71-76 (in Chinese))
9	邱庆刚, 王海鹏, 赵亮等. 楔形肋片内冷通道传热与流动阻力特性. 航空动力学报, 2011,26(12):2648-2654
9	( Qiu Qinggang, Wang Haipeng, Zhao Liang, et al. Heat transfer and friction behavior in internal cooling duct with cuniform-fins. Journal of Aerospace Power, 2011,26(12):2648-2654 (in Chinese))
10	朱兴丹, 张靖周, 谭晓茗 . 旋转对涡轮叶片异型孔气膜冷却的影响. 推进技术, 2016,37(9):1713-1719
10	( Zhu Xingdan, Zhang JinZhou, Tan Xiaoming. Effects of rotation on shaped-hole film cooling on a turbine blade. Journal of Propulsion Technology, 2016,37(9):1713-1719 (in Chinese))
11	朱兴丹, 张靖周, 谭晓茗 . 旋转状态下涡轮叶片复合冷却结构. 航空动力学报, 2017(3):584-591
11	( Zhu Xingdan, Zhang Jinzhou, Tan Xiaoming. Composite cooling structure on rotating turbine blade. Journal of Aerospace Power, 2017(3):584-591 (in Chinese))
12	韩枫, 李海旺, 马薏文等. 旋转对弯扭涡轮叶片前缘气膜冷却的影响. 航空动力学报, 2019,34(6):1352-1363
12	( Han Feng, Li Haiwang, Ma Yiwen, et al. Effect of rotation on the leading-sdge region film cooling of a twisted turbine blade. Journal of Aerospace Power, 2019,34(6):1352-1363 (in Chinese))
13	Kane TR, Ryan R, Banerjee AK. Dynamics of a cantilever beam attached to a moving base. Journal of Guidance, Control, and Dynamics, 1987,10(2):139-151
14	黎亮, 章定国, 洪嘉振 . 中心刚体-功能梯度材料梁系统的动力学特性. 机械工程学报, 2013,49(13):77-84
14	( Li Liang, Zhang Dingguo, Hong Jiazhen, Dynamics of hub-functionally graded material beam systems. Journal of Mechanical Engineering, 2013,49(13):77-84 (in Chinese))
15	黎亮, 章定国, 洪嘉振 . 作大范围运动 FGM 矩形薄板的动力学特性研究. 动力学与控制学报, 2013,11(4):329-335
15	( Li Liang, Zhang Dingguo, Hong Jiazhen, Dynamics of rectangular functionally graded thin plates undergoing overall motion. Journal of Dynamics and Control, 2013,11(4):329-335 (in Chinese))
16	方建士, 章定国 . 旋转悬臂梁的刚柔耦合动力学建模与频率分析. 计算力学学报, 2012,29(3):333-339
16	( Fang Jianshi, Zhang Dingguo, Rigid-flexible couping and frequency analysis of a rotating cantilever beam. Chinese Journal of Computational Mechanics, 2012,29(3):333-339 (in Chinese))
17	杜超凡, 章定国 . 基于无网格点插值法的旋转悬臂梁的动力学分析. 物理学报, 2015,64(3):396-405
17	( Du Chaofan, Zhang Dingguo, A meshfree method based on point interpolation for dynamic analysis of rotating cantilever beams. . Acta Phys. Sin, 2015,64(3):396-405 (in Chinese))
18	范纪华, 章定国, 洪嘉振 . 基于Bezier插值方法的作大范围旋转运动锥形悬臂梁动力学研究. 动力学与控制学报, 2012,10(4):347-354
18	( Fan Jihua, Zhang Dingguo, Hong Jiazhen, Dynamic analysis of a rotating tapered cantilever beam based on Bezier curve interpolation. Journal of Dynamics and Control, 2012,10(4):347-354 (in Chinese))
19	范纪华, 章定国 . 基于变形场不同离散方法的柔性机器人动力学建模与仿真. 力学学报, 2016,48(4):843-856
19	( Fan Jihua, Zhang Dingguo, Dynamic modeling and simulation of flexible robots based on different discretization methods. Chinese Journal of Theoretical and Applied Mechanics, 2016,48(4):843-856 (in Chinese))
20	范纪华, 章定国 . 旋转柔性悬臂梁动力学的Bezier插值离散方法研究. 物理学报, 2014,63(15):154501-154501
20	( Fan Jihua, Zhang Dingguo. Bezier interpolation method for the dynamics of rotating flexible cantilever beam. Acta Phys. Sin., 2014,63(15):154501-154501 (in Chinese))
21	范纪华, 章定国 . 旋转悬臂梁动力学的B样条插值方法. 机械工程学报, 2012,48(23):59-64
21	( Fan Jihua, Zhang Dingguo, B-spline interpolation method for the dynamics of rotating cantilever beam. Journal of Mechanical Engineering, 2012,48(23):59-64 (in Chinese))
22	韩广才, 吴艳红, 王寅超等. 旋转叶片刚柔耦合系统动力学分析. 哈尔滨工程大学学报, 2011(6):736-741
22	( Han Guangcai, Wu Yanhong, Wang Yanchao, et al. Dynamic analysis of a rotating blade with a rigid-flexible coupling, pre-twisted angle, and variable cross-section. Journal of Harbin Engineering University, 2011(6):736-741 (in Chinese))
23	陈思佳, 章定国 . 中心刚体-变截面梁系统的动力学特性研究. 力学学报, 2011,43(4):790-794
23	( Chen Sijia, Zhang Dingguo, Dynamics od hub-varable section beam systems. Chinese Journal of Theoretical and Applied Mechanics, 2011,43(4):790-794 (in Chinese))
24	高晨彤, 黎亮, 章定国等. 考虑剪切效应的旋转FGM楔形梁刚柔耦合动力学建模与仿真. 力学学报, 2018,50(3):210-222
24	( Gao Chentong, Li Liang, Zhang Dingguo, et al. Dynamci modeling and simulation of rotating FGM tapered beams with shear effect. Chinese Journal of Theoretical and Applied Mechanics, 2018,50(3):210-222 (in Chinese))
25	Oh SY, Librescu L, Song O. Vibration of turbomachinery rotating blades made-up of functionally graded materials and operating in a high temperature field. Acta Mechanica, 2003,166(1-4):69-87
26	万云博, 马戎, 王年华等. 基于混合网格多维梯度重构的热流预测方法研究. 力学学报, 2018,50(5):1003-1012
26	( Wan Yunbo, Ma Rong, Wang Nianhua, et al. Accurate aero-heating predictions based on multi-dimensional gradient reconstruction on hybrid unstructured grids. Chinese Journal of Theoretical and Applied Mechanics, 2018,50(5):1003-1012 (in Chinese))
27	许新, 李世荣 . 功能梯度材料微梁的热弹性阻尼研究. 力学学报, 2017,49(2):308-316
27	( Xu Xin, Li Shirong, Analysis of thermoelastic damping for functionally graded material micro-beam. Chinese Journal of Theoretical and Applied Mechanics, 2017,49(2):308-316 (in Chinese))
28	曹蕾蕾, 裴建中, 张学敏等. 功能梯度材料热传导问题的仿真. 计算机仿真, 2012,29(8):387-390
28	( Cao Leilei, Pei Jianzhong, Zhang Xuemin, et al. Simulation method of steady-state heat conduction in functionally graded material. Computer Simulation, 2012,29(8):387-390 (in Chinese))
29	刘锦阳, 袁瑞, 洪嘉振 . 考虑热效应的柔性板的刚-柔耦合动力学特性. 上海交通大学学报, 2008,42(8):1226-1232
29	( Liu Jinyang, Yuan Rui, Hong Jiazhen, The on ridig-flexible coupling dynamicperformance for a rectangular plate considering thermal effect. Journal of Shanghai Jiaotong University, 2008,42(8):387-390 (in Chinese))
30	Cui YQ, Yu ZQ, Lan P. A novel method of thermo-mechanical coupled analysis based on the unified description. Mechanism and Machine Theory, 2019,134:376-392
31	Cepon G, Starc B, Zupancic B, et al. Coupled thermo-structural analysis of a bimetallic strip using the absolute nodal coordinate formulation. Multibody System Dynamics, 2017,41(4):391-402
32	李世荣, 苏厚德, 程昌钧 . 热环境中粘贴压电层功能梯度材料梁的自由振动. 应用数学和力学, 2009,30(8):907-918
32	( Li Shirong, Su Houde, Cheng Changjun, Free vibration of functionally Graded material beams with surface-bonded piezeoelectric layers in thermal environment. Applied Mathematics and Mechanics, 2009,30(8):907-918 (in Chinese))
33	黎亮, 章定国, 郭永彬 . 变温度场中刚柔耦合功能梯度梁系统的动力学特性研究. 振动工程学报, 2017,30(1):9-19
33	( Li Liang, Zhang Dingguo, Guo Yongbin, Dynamics of rigid--flexible coupling Fgm beam systems in variable temperature fields. Journal of Vibration Engineering, 2017,30(1):9-19 (in Chinese))
34	Javaheri R, Eslami MR. Thermal buckling of functionally graded plates based on higher order theory. Journal of Thermal Stresses, 2002,25(7):603-625
35	Chen Y, Jin G, Zhang C, et al. Thermal vibration of FGM beams with general boundary conditions using a higher-order shear deformation theory. Composites Part B: Engineering, 2018,153:376-386