一类新的超弹性-循环塑性本构模型

孟令凯; 周长东; 郭坤鹏; 张晓阳

doi:10.6052/0459-1879-15-333

一类新的超弹性-循环塑性本构模型

北京交通大学土木建筑工程学院, 北京 100044

基金项目: 国家自然科学基金资助项目(51478033,51178029).

详细信息

通讯作者:
周长东,教授,主要研究方向:结构抗震分析.E-mail:zhouchangdong@163.com

中图分类号: TU13
计量
- 文章访问数: 1351
- HTML全文浏览量: 168
- PDF下载量: 631
出版历程
- 收稿日期: 2015-09-04
- 修回日期: 2016-01-18
- 刊出日期: 2016-05-17

A NEW FORMULATION OF CONSTITUTIVE MODEL FOR HYPERELASTIC-CYCLIC PLASTICITY

School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China

摘要

摘要: 目前,很多经典的超弹性-有限塑性本构模型已被提出,但由于超弹性理论中中间构型的引入使得随动硬化法则相对复杂,故多数文献均采用的是经典的Armstrong-Frederick(A-F)随动硬化法则.本文基于已有的本构理论,利用多机制过程的概念拓展了Lion塑性变形分解理论,明确提出了多重中间构型的概念,并在此基础上,对经典理论中客观性的定义进行了概念上的推广,使其更好地适用于超弹性本构理论分析,同时提出了一类新的超弹性-有限塑性本构模型.这类本构模型满足热动力学法则,且可融合多种小变形循环塑性理论中常用的随动硬化法则(如经典的A-F模型,Chaboche模型,Ohno-Wang(O-W)模型以及Karim-Ohno(K-O)模型等),使得小变形理论中背应力的加法分解性质及其演化的临界面阶跃特性在大变形领域中均有所体现,故本文提出的本构理论可看作是小变形循环塑性模型在大变形理论中的扩展.本文最后以K-O模型为例,对推荐模型进行了详细探讨,并与相应的次弹性模型进行了对比.
- 本构模型 /
- 客观性 /
- 变形梯度分解理论 /
- 随动硬化法则 /
- 循环塑性 /
- 结构分析
Abstract: Until now, a number of classical hyperelastic-finite plasticity constitutive models have been proposed. However, most of them are based on the classical Armstrong-Frederick kinematic hardening rule in consideration of the complexity brought by the introduction of the intermediate configuration in the hyperelasticity theory. Hence, based on the existed constitutive theories, the methodology of Lion decomposition theory was extended utilizing the notion of the multi-mechanism process and clearly put forward the conception of the multi-intermediate configuration. Furthermore, the classical concept of the objectivity in the continuum mechanics for better application to the hyperelasticity theory was generalized and then a new hyperelastic-finite plastic constitutive model was proposed. The new constitutive model not only meets the thermal dynamic laws but also can incorporate several classical kinematic hardening rules which were usually adopted in cyclic plasticity of infinitesimal deformation theory (e.g. the A-F model, Chaboche model, O-W model and the K-O model, etc.). Therefore, this model corresponding to finite deformation problems contains two typical characteristics adopted by infinitesimal deformation theory: the additive decomposition property and step mutation feature of the backstress on the critical surface. Thus, the present model can be treated as parallel to the corresponding form in the small deformation case. Finally, the situation accounting for Karim-Ohno kinematic hardening rule is under specific consideration and compared with the hypoelasticity constitutive model.
- constitutive model /
- objectivity /
- decomposition theory of deformation gradient /
- kinematic hardening rule /
- cyclic plasticity /
- structural analysis

HTML全文

参考文献(33)

1 Coombs WM, Crouch RS, Augarde CE. A unique critical state two-surface hyperplasticity model for fine-grained particulate media. Journal of the Mechanics and Physics of Solids, 2013, 61(1):175-189

2 刘时鹏, 施建勇, 雷国辉等. K0 固结饱和土柱孔扩张问题弹塑性分析. 岩土力学, 2013, 34(2): 389-394+403 (Liu Shipeng, Shi Jianyong, Lei Guohui, et al. Elastoplastic analysis of cylindrical cavity expansion in K0 consolidated saturated soils. Rock and Soil Mechanics, 2013, 34(2): 389-394+403 (in Chinese))

3 王小莉. 橡胶隔振器多轴疲劳寿命预测方法研究. [博士论文]. 广州:华南理工大学, 2014 (Wang Xiaoli. Studies on life prediction of multiaxial fatigue for rubber isolators. [PhD Thesis]. Guangzhou: South China University of Technology, 2014 (in Chinese))

4 盖芳芳, 才源, 郝俊才等. 超高速撞击压力容器后壁损伤实验及建模研究. 振动与冲击, 2015, 34(13): 12-17 (Gai Fangfang, Cai Yuan, Hao Juncai, et al. Tests and modeling for damage of pressure vessels' rear wall caused by hypervelocity impact. Journal of Vibration and Shock, 2015, 34(13): 12-17 (in Chinese))

5 Bargmann S, Svendsen B, Ekh M. An extended crystal plasticity model for latent hardening in polycrystals. Computational Mechanics,2011, 48(6): 631-645

6 Ishikawa H. Subsequent yield surface probed from its current center. International Journal of Plasticity, 1997, 13(6-7): 533-549

7 Barlat F, Aretz H, Yoon JW, et al. Linear transformation-based anisotropic yield functions. International Journal of Plasticity,2005, 21(5): 1009-1039

8 Suprun AN. A constitutive model with three plastic constants: the description of anisotropic workhardening. International Journal of Plasticity, 2006, 22(7): 1217-1233

9 Feigenbaum HP, Dafalias YF. Directional distortional hardening in metal plasticity within thermodynamics. International Journal of Solids and Structures, 2007, 44(22-23): 7526-7542

10 Armstrong PJ, Frederick CO. A mathematical representation of the multiaxial bauscinger effect. CEGB Report No. RD/B/N 731, Berkeley Nuclear Laboratories, Berkeley, CA, 1966

11 Chaboche JL, Dang-Van K, Cordier G. Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. In: Proceedings of the 5th International Conference on SMiRT, Div. L, Berlin, Germany, 1979

12 Chaboche JL. Time-independent constitutive theories for cyclic plasticity. International Journal of Plasticity, 1986, 2(2): 149-188

13 Ohno N, Wang JD. Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior. International Journal of Plasticity, 1993, 9(3): 375-390

14 Abdel-Karim M, Ohno N. Kinematic hardening model suitable for ratcheting with steady-state. International Journal of Plasticity,2000, 16(3-4): 225-240

15 Xiao H, Bruhns OT, Meyers A. Elastoplasticity beyond small deformations. Acta Mechanica, 2006, 182(1-2):31-111

16 Zhu Y, Kang G, Kan Q, et al. Logarithmic stress rate based constitutive model for cyclic loading in finite plasticity. International Journal of Plasticity, 2014, 54(March): 34-55

17 Lion A. Constitutive modelling at finite thermoviscoplasticity: a physical approach based on nonlinear rheological models. International Journal of Plasticity, 2000, 16(5): 469-494

18 Tsakmakis C, Willuweit A. A comparative study of kinematic hardening rules at finite deformations. International Journal of Non- Linear Mechanics, 2004, 39(4): 539-554

19 Shutov AV, Kreißig R. Finite strain viscoplasticity with nonlinear kinematic hardening: phenomenological modeling and time integration. Computer Methods in Applied Mechanics and Engineering,2008, 197(21-24): 2015-2029

20 Vladimirov IN, Pietryga MP, Reese S. On the modeling of non-linear kinematic hardening at finite strains with application to springbackcomparison of time integration algorithms. International Journal for Numerical Methods in Engineering, 2008, 75(1): 1-28

21 Henann DL, Anand L. A large deformation theory for ratedependent elastic-plastic materials with combined isotropic and kinematic hardening. International Journal of Plasticity, 2009,25(10): 1833-1878

22 Lee EH. Elastic plastic deformation at finite strains. Journal of Applied Mechanics, 1969, 36(1): 1-6

23 Zhu YL, Kang GH, Kan QH, et al. An extended cyclic plasticity model at finite deformations describing the Bauschinger effect and ratchetting behavior. In: 13th International Conference on Fracture June 16-21, 2013, Beijing, China

24 Zecevic M, Knezevic M. A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4. International Journal of Plasticity, 2015,72: 200-217

25 Lin RC, BrocksW, Batten J. On internal dissipation inequalities and finite strain inelastic constitutive laws: Theoretical and numerical comparisons. International Journal of Plasticity, 2006, 22: 1825-1857

26 Bari S, Hassan T. Anatomy of coupled constitutive models for ratcheting simulation. International Journal of Plasticity, 2000, 16(3-4):381-409

27 Naghdabadi R, Yeganeh M, Saidi AR. Application of corotational rates of the logarithmic strain in constitutive modeling of hardening materials at finite deformations. International Journal of Plasticity,2005, 21(8): 1546-1567

28 Wu HC. On stress rate and plasticity constitutive equations referred to a body-fixed coordinate system. International Journal of Plasticity,2007, 23(9): 1486-1511

29 Dafalias Y. Plastic spin: necessity or redundancy. International Journal of Plasticity, 1998, 14(9): 909-31

30 Green AE, Naghdi PM. Some remarks on elastic-plastic deformation at finite strain. International Journal of Engineering Science,1971, 9(12): 1219-1229

31 Casey J, Naghdi PM. A remark on the use of the decomposition F = FeFp in plasticity. Journal of Applied Mechanics, 1980, 47(3):672-675

32 Dashner PA. Invariance considerations in large strain elastoplasticity. Journal of Applied Mechanics, 1986, 53(1): 55-60

33 Gurtin ME, Anand L. The decomposition F = (FFp)-F_e, material symmetry, and plastic irrotationality for solids that are isotropicviscoplastic or amorphous. International Journal of Plasticity,2005, 21(9): 1686-1719

施引文献(5)

期刊类型引用(2)

1.	高江平，杨华，蒋宇飞，吴鹏阁，孙世界. 三剪应力统一强度理论研究. 力学学报. 2017(06): 1322-1334 . 本站查看
2.	王宝珍，胡时胜. 猪肝动态力学性能及本构模型研究. 力学学报. 2017(06): 1399-1408 . 本站查看