EI、Scopus 收录
中文核心期刊
刘干斌, 谢康和, 施祖元. 黏弹性饱和多孔介质中圆柱孔洞的频域响应[J]. 力学学报, 2004, 36(5): 557-563. DOI: 10.6052/0459-1879-2004-5-2003-386
引用本文: 刘干斌, 谢康和, 施祖元. 黏弹性饱和多孔介质中圆柱孔洞的频域响应[J]. 力学学报, 2004, 36(5): 557-563. DOI: 10.6052/0459-1879-2004-5-2003-386
Frequency response of a cylindrical cavity in poro-viscoelastic saturated medium[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(5): 557-563. DOI: 10.6052/0459-1879-2004-5-2003-386
Citation: Frequency response of a cylindrical cavity in poro-viscoelastic saturated medium[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(5): 557-563. DOI: 10.6052/0459-1879-2004-5-2003-386

黏弹性饱和多孔介质中圆柱孔洞的频域响应

Frequency response of a cylindrical cavity in poro-viscoelastic saturated medium

  • 摘要: 研究了无限黏弹性饱和多孔介质中圆柱孔洞(有衬砌)表面受轴对称简谐荷载和流体压力作用下的频域响应问题. 引入Carcione提出的本构模型来描述介质的流变和松弛性质. 考虑衬砌和介质的相对渗透性,孔洞处于半封闭状态,边界半透水. 引入两个势函数,在频域中得到了应力、位移和超孔隙水压力响应解答. 并进行了算例分析,讨论了反映介质黏弹性性质的最小质量因子,反映孔洞边界半透水性质的渗透性参数及衬砌和介质的相对刚度对问题的影响. 分析结果表明:以上参数对圆柱孔洞的频域响应有很大影响.

     

    Abstract: This paper discusses the frequency response of a poroviscoelasticsaturated medium to axially symmetric harmonious surface traction and fluidpressure over the boundary of a cavity in the form of a circular liningcavity of infinite length. A constitutive model presented by Carcione isintroduced to describe the creep and relaxation behavior of medium. Thecavity is taken as partially sealed with partial permeable boundaryconsidering the relative permeability of the liner and the medium. Theanalytical solutions of stresses, displacement and pore pressure amplitudeare derived in frequency domain by introducing two scalar potentialfunctions. A parametric study is made based on the solutions to illustratethe influence of the minimum quality factor concerning the creep andrelaxation behavior of porous medium, the permeability parameter concerningthe partial permeable behavior of boundary, and relative rigidity of linerand medium on the frequency response of the cavity. It is indicated thatthere are strong correlations among these parameters and the attenuation ofradial displacement, stress, and pore pressure amplitude.

     

/

返回文章
返回