EI、Scopus 收录
中文核心期刊
韩斌, 邢修三. 二维位错裂纹的稳定性分析[J]. 力学学报, 1997, 29(2): 224-230. DOI: 10.6052/0459-1879-1997-2-1995-219
引用本文: 韩斌, 邢修三. 二维位错裂纹的稳定性分析[J]. 力学学报, 1997, 29(2): 224-230. DOI: 10.6052/0459-1879-1997-2-1995-219
STABILITY ANALYSIS OF A TWO-DIMENTIONAL DISLOCATION CRACK MODEL[J]. Chinese Journal of Theoretical and Applied Mechanics, 1997, 29(2): 224-230. DOI: 10.6052/0459-1879-1997-2-1995-219
Citation: STABILITY ANALYSIS OF A TWO-DIMENTIONAL DISLOCATION CRACK MODEL[J]. Chinese Journal of Theoretical and Applied Mechanics, 1997, 29(2): 224-230. DOI: 10.6052/0459-1879-1997-2-1995-219

二维位错裂纹的稳定性分析

STABILITY ANALYSIS OF A TWO-DIMENTIONAL DISLOCATION CRACK MODEL

  • 摘要: 在已有的一维穿透位错裂纹模型及能量计算的基础上,将其推广为二维椭圆盘状裂纹模型,并计算了其能量.根据能量平衡原理,给出了位错裂纹模型的裂纹平衡尺寸、裂纹扩展临界应力.并与不考虑位错影响的宏观断裂力学中Ⅰ型穿透裂纹的Grifith解及椭圆盘裂纹的Grifith解加以比较.给出的位错裂纹模型解在位错数目n=0时与宏观断裂力学解一致

     

    Abstract: Based on the one-dimensional dislocation crack model and the energy calculations, a two-dementional dislocation crack model is presented,which is an elliptical crack caused by the dislocation pile-up groups.The total potential energy of this model is obtained. Following the principle of conservation of energy, the equilibrium length of the crack and the critical stresses for growing cracks are given. All results are compared with Griffith's solutions for Mode-I through crack and the elliptical embedded crac...

     

/

返回文章
返回