一种基于耗散能计算的高周疲劳参数预测方法

李源; 韩旭; 刘杰; 姜潮

doi:10.6052/0459-1879-12-300

一种基于耗散能计算的高周疲劳参数预测方法

doi: 10.6052/0459-1879-12-300

李源^1,2, ,,
韩旭¹,
刘杰¹,
姜潮¹

1.
汽车车身先进设计制造国家重点实验室, 湖南大学机械与运载工程学院, 长沙410082
2. 国防科学技术大学指挥军官基础教育学院, 交通运输工程系, 长沙410073

基金项目: 国家自然科学基金(51175160),装备预先研究(62501036012)和国防科技大学预先研究(JC11-09-01)资助项目.

详细信息

通讯作者:
李源,讲师,主要研究方向:实验力学、疲劳可靠性和结构失效分析与预防.E-mail:yuanli@nudt.edu.cn

中图分类号: O346.2
计量
- 文章访问数: 2043
- HTML全文浏览量: 73
- PDF下载量: 1441
- 被引次数: 0
出版历程
- 收稿日期: 2012-10-29
- 修回日期: 2013-02-19
- 刊出日期: 2013-05-18

A PREDICTION METHOD ON HIGH-CYCLE FATIGUE PARAMETERS BASED ON DISSIPATED ENERGY COMPUTATION

Li Yuan^{1,2
, ,},
Han Xu¹,
Liu Jie¹,
Jiang Chao¹

1.
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
2. Department of Traffic and Transportation Engineering, College of Basic Education for Commanding Officers, National University of Defense and Technology, Changsha 410073, China

Funds: The project was supported by the National Natural Science Foundation of China (51175160), Advanced Research Program of Army (62501036012) and Advanced Research Program of NUDT (JC11-09-01).

摘要

摘要: 在热力学框架下,基于薄板假设,建立金属材料薄板试样在高周疲劳载荷作用下的热传导方程,将试样温度场数据和实时载荷信号导入,准确计算与高周疲劳损伤相关的单个循环内耗散能. 基于该方法,以316L不锈钢材料为例,通过实时监测试样不同应力水平下高周疲劳破坏全过程中耗散能的变化,拟合出耗散能-疲劳寿命曲线,呈现与传统的应力-疲劳寿命曲线相同的规律;提出一种新的预测高周疲劳极限的能量法,确定的疲劳极限与实验值相近.
- 高周疲劳 /
- 金属材料 /
- 耗散能 /
- 疲劳寿命 /
- 疲劳极限
Abstract: A heat conduction equation under high-cycle fatigue loadings was established using sheet assumption within thermodynamic framework. Dissipated energy per cycle, correlated with fatigue damage, could be deduced from temperature field data of specimen and real-time load signal. Then, taking 316L stainless steel for example, the dissipation energy per cycle variations were in-situ monitored during each high-cycle fatigue test under different stress levels. Dissipated energy versus fatigue lifetime curve shows the same pattern as the traditional stress versus fatigue lifetime curve. A new energy method was developed to predict high-cycle fatigue limit. The high-cycle fatigue limit determined by dissipated energy measurement was close to the experimental fatigue limit.
- high-cycle fatigue /
- metal material /
- dissipated energy /
- fatigue lifetime /
- fatigue limit

HTML全文

参考文献(21)

杨锋平,孙秦,罗金恒等. 一个高周疲劳损伤演化修正模型. 力学学报, 2012,44(1): 140-147 (Yang Fengping, Sun Qin, Luo Jinhuan, et al. A correlated damage law for high-cycle fatigue. Chinese Journal of Theoretical and Applied Mechanics, 2012,44(1):140-147 (in Chiniese))

许金泉,郭凤明. 疲劳损伤演化的机理及损伤演化律. 机械工程学报, 2010,46(2): 40-46 (Xu Jinquan, Guo Fengming. Mechanisms of fatigue damage evolution and evolution law. Journal of Mechanical Engineering, 2010,46(2):40-46 (in Chiniese))

Vincent L. On the ability of some cyclic plasticity models to predict the evolution of stored energy in a type 304L stainless steel submitted to high cycle fatigue. European Journal of Mechanics, A/Solids, 2008, 27(2): 161-180

La Rosa G, Risitano A. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. International Journal of Fatigue, 2000, 22(1): 65-73

Luong MP. Fatigue limit evaluation of metals using an infrared thermographic technique. Mechanics of Materials, 1998, 28(1-4): 155-163

Amiri M, Khonsari MM. Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load. International Journal of Fatigue, 2010, 32(2): 382-389

Wang XG, Crupi V, Guo XL, et al. Quantitative Thermographic Methodology for fatigue assessment and stress measurement. International Journal of Fatigue, 2010, 32(12): 1970-1976

Doudard C, Calloch S, Cugy P, et al. A probabilistic two-scale model for high-cycle fatigue life predictions. Fatigue and Fracture of Engineering Materials and Structures, 2005, 28(3): 279-288

Munier R, Doudard C, Calloch S, et al. Contribution of kinematical and thermal full-field measurements for mechanical properties identification: application to high cycle fatigue of steels. Experimental Mechanics, 2011, 52(7): 1-14

曾伟,韩旭,丁桦等. 基于红外热象技术的金属材料疲劳性能研究方法. 机械强度, 2008, 30(4): 658-663 (Zeng Wei, Han Xu, Ding Hua, et al. Fatigue characteristics evolution of metals based on infrared thermographic technique. Journal of Mechanical Engineering, 2008,30(4):658-663 (in Chiniese))

童小燕,姚磊江,吕胜利. 疲劳能量方法研究回顾. 机械强度. 2004,26(S): 216-221 (Tong Xiaoyan, Yao Leijing, Lü Shengli. Review on fatigue energy theory. Journal of Mechanical Strength, 2004,26(S):216-221 (in Chiniese))

Fan JL, Guo XL, Wu CW, et al. Research on fatigue behavior evaluation and fatigue fracture mechanisms of cruciform welded joints. Materials Science and Engineering A, 2011, 528(29-30): 8417-8427

魏凌霄,闫志峰,王文先等. 基于红外热成像的镁合金疲劳裂纹扩展的研究. 机械工程学报. 2012, 48(6): 64-69 (Wei Lingxiao, Yan Zhifeng, Wang Wenxian, et al. Study on fatigue crack propagation of AZ31B magnesium alloy based on infrared thermo-graphic technology. Journal of Mechanical Engineering, 2012,48(6):64-69 (in Chiniese))

Boulanger T, Chrysochoos A, Mabru C, et al. Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels. International Journal of Fatigue, 2004, 26(3): 221-229

Meneghetti G. Analysis of the fatigue strength of a stainless steel based on the energy dissipation. International Journal of Fatigue, 2007, 29(1): 81-94

Pastor ML, Balandraud X, Grédiac M, et al. Applying infrared thermography to study the heating of 2024-T3 aluminium specimens under fatigue loading. Infrared Physics and Technology, 2008, 51(6): 505-515

Connesson N, Maquin F, Pierron F. Experimental energy balance during the first cycles of cyclically loaded specimens under the conventional yield stress. Experimental Mechanics, 2011, 51(1): 23-44

Connesson N, Maquin F, Pierron F. Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600. Acta Materialia, 2011, 59(10): 4100-4115

Maquin F, Pierron F. Heat dissipation measurements in low stress cyclic loading of metallic materials: From internal friction to micro-plasticity. Mechanics of Materials, 2009, 41(8): 928-942

Louche H. Analyse par thermographie infrarouge des effets dissipatifs de la localisation dans des aciers. [PhD Thesis]. Montpellier: Universite Montpellier Ⅱ, 1999

Chrysochoos A, Louche H. Infrared image processing to analyze the calorific effects accompanying strain localization. International Journal of Engineering Science, 2000, 38(16): 1759-1788

施引文献

资源附件(0)

访问统计