1 | 隋允康 . 建模$\cdot $变换$\cdot $优化: 结构综合方法新进展. 大连: 大连理工大学出版社, 1996 | 1 | ( Sui Yunkang. Modeling, Transformation and Optimization -- New Development of Structural Synthesis Method. Dalian: Dalian University of Technology Press, 1996 (in Chinese)) | 2 | 隋允康, 叶红玲 . 连续体结构拓扑优化的ICM方法. 北京: 科学出版社, 2013 | 2 | ( Sui Yunkang, Ye Hongling. Continuum Topology Optimization ICM Method. Beijing: Science Press, 2013 (in Chinese)) | 3 | Sui YK, Peng XR . Modeling, Solving and application for topology optimization of continuum structures, ICM Method Based on Step Function. Elsevier, 2018 | 4 | Fleury C. Structural weight optimization by dual methods of convex programming. International Journal for Numerical Methods in Engineering, 1979,14(2):1761-1783 | 5 | Fleury C. Primal and dual methods in structural optimization. Journal of the Structural Division, 1980,106(5):1117-1133 | 6 | Fleury C, Braibant V. Structural optimization: A new dual method using mixed variables. International Journal for Numerical Methods in Engineering, 1986,23(3):409-428 | 7 | 钱令希, 钟万勰, 程耿东 等. 工程结构优化设计的一个新途径——序列二次规划SQP. 计算结构力学及其应用, 1984,1(1):7-20 | 7 | ( Qian Lingxi, Zhong Wanxie, Cheng Gendong, et al. An approach to structural optimization --- sequential quadratic programming, SQP. Computational Structural Mechanics and Applications, 1984,1(1):7-20 (in Chinese)) | 8 | Fleury C. CONLIN: An efficient dual optimizer based on convex approximation concepts. Structural Optimization, 1989,1(2):81-89 | 9 | Svanberg K. The method of moving asymptotes---a new method for structural optimization. International Journal for Numerical Methods in Engineering, 1987,24(2):359-373 | 10 | Beekers M, Fleury C. A primal-dual approach in truss topology optimization. Computers & Structures, 1997,64(1-4):77-88 | 11 | Hoppe RHW, Linsenmann C, Petrova SI. Primal-dual newton methods in structural optimization. Comput Visual Sci, 2006,9(2):71-87 | 12 | Bubeck S. Convex optimization: Algorithms and complexity. Foundations and Trends in Machine Learning, 2015,8(3-4):231-357 | 13 | 隋允康, 阳志光 . 应用两点有理逼近改进的牛顿法和对偶法. 大连理工大学学报, 1994,34(1):1-9 | 13 | ( Sui Yunkang, Yang Zhiguang, Modified Newton's method and dual method through rational approximation at two expanded points. Journal of Dalian University of Technology, 1994,34(1):1-9 (in Chinese)) | 14 | 隋允康, 邢誉峰, 张桂明 . 基于两点累积信息的原/倒变量展开的对偶优化方法. 力学学报, 1994,26(6):699-710 | 14 | ( Sui Yunkang, Xing Yifeng, Zhang Guiming, The dual optimization method by original/reciprocal variables' expansion based on cumulative information at two points. Acta Mechanica Sinica, 1994,26(6):699-710 (in Chinese)) | 15 | Bendsoe MP, Kikuchi N. Generating optimal topologies in structural design using a homogenization method. Computer Methods in Applied Mechanics and Engineering, 1988,71(2):197-224 | 16 | Rozvany G. A critical review of established methods of structural topology optimization. Structural and Multidisciplinary Optimization, 2009,37(3):217-237 | 17 | Sigmund O, Maute K. Topology optimization approaches. Structural and Multidisciplinary Optimization, 2013,48(6):1031-1055 | 18 | 蔡守宇, 张卫红, 高彤 等. 基于固定网格和拓扑导数的结构拓扑优化自适应泡泡法. 力学学报, 2019,51(4):1235-1244 | 18 | ( Cai Shouyu, Zhang Weihong, Gao Tong, et al. Adaptive bubble method using fixed mesh and topological derivative for structural topology optimization. Chinese Journal of Theoretical and Applied Mechanics, 2019,51(4):1235-1244 (in Chinese)) | 19 | Mlejnek HP. Some aspects of the genesis of structures. Structural Optimization, 1992,5(1-2):64-69 | 20 | Norato J, Bends?e M, Haber R, et al. A topological derivative method for topology optimization. Structural and Multidisciplinary Optimization, 2007,33(4-5):375-386 | 21 | Xie YM, Steven GP. A simple evolutionary procedure for structural optimization. Comput Struct, 1993,49(5):885-896 | 22 | Osher S, Sethian J. Fronts propagating with curvature dependent speed-algorithms based on hamilton-jacobi formulations. J Comput Phys, 1988,79(1):12-49 | 23 | Bourdin B, Chambolle A. Design-dependent loads in topology optimization. ESAIM: Control, Optimisation and Calculus of Variations, 2003,9(8):19-48 | 24 | Zhang WS, Li D, Yuan J. A new three-dimensional topology optimization method based on moving morphable components (MMCs). Computational Mechanics, 2017,59(4):647-665 | 25 | Yi GL, Sui YK. Different effects of economic and structural performance indicators on model construction of structural topology optimization. Acta Mechanica Sinia, 2015,9:1-12 | 26 | 彭细荣, 隋允康 . 对连续体结构拓扑优化合理模型的再探讨. 固体力学学报, 2016,37(1):1-11 | 26 | ( Peng Xirong, Sui Yunkang, A further discussion on rational topology optimization models for continuum structures. Chinese Journal of Solid Mechanics, 2016,37(1):1-11 (in Chinese)) | 27 | 隋允康, 叶红玲, 彭细荣 . 应力约束全局化策略下的连续体结构拓扑优化. 力学学报, 2006,38(3):364-370 | 27 | ( Sui Yunkang, Ye Hongling, Peng Xirong, Topological optimization of continuum structure under the strategy of globalization of stress constraints. Chinese Journal of Theoretical and Applied Mechanics, 2006,38(3):364-370 (in Chinese)) | 28 | 隋允康, 彭细荣, 叶红玲 . 应力约束全局化处理的连续体结构ICM拓扑优化方法. 工程力学, 2006,23(7):1-7 | 28 | ( Sui Yunkang, Peng Xirong, Ye Hongling, Topology optimization of continuum structure with globalization of stress constraints by ICM method. Engineering Mechanics, 2006,23(7):1-7 (in Chinese)) | 29 | 隋允康, 彭细荣 . 求解一类可分离凸规划的对偶显式模型DP-EM方法. 力学学报, 2017,49(5):1135-1144 | 29 | ( Sui Yunkang, Peng Xirong, A dual explicit model based DP-EM method for solving a class of separable convex programming. Chinese Journal of Theoretical and Applied Mechanics, 2017,49(5):1135-1144 (in Chinese)) | 30 | Sui YK, Peng XR. Explicit model of dual programming and solving method for a class of separable convex programming problems. Engineering Optimization, 2019,51(7-9):1604-1625 | 31 | Andreassen E, Clausen A, Lazarov BS, et al. Efficient topology optimization in MATLAB using 88 lines of code. Structural Multidisciplinary Optimization, 2011,43(1):1-16 |
|