EI、Scopus 收录
中文核心期刊

壁面润湿性对多孔并列通气气泡融合特性的影响

EFFECTS OF WALL WETTABILITY ON THE COALESCENCE CHARACTERISTICS OF BUBBLES GENERATED BY PARALLEL MULTI-HOLE VENTILATION

  • 摘要: 为揭示壁面润湿性对多孔通气气泡融合及壁面压力分布的影响, 基于流体体积法建立三孔和四孔并列通气数值模型, 在保持孔径、孔间距、单孔通气率及来流条件一致的情况下, 结合气泡形态、流向动量密度、截面速度矢量及壁面压力分布, 研究不同壁面接触角下气泡融合特性. 结果表明, 较小接触角下气泡主要沿轴向独立发展, 周向铺展范围较小, 泡间水流通道持续连通. 随着接触角增大, 气泡周向铺展增强, 相邻气泡间距减小, 泡间水流通道逐渐收缩并闭合. 90°条件下, 三孔工况中仅一侧通道闭合并形成局部融合. 四孔工况中间两气泡率先融合, 受两侧相邻气泡及泡间水流通道约束, 融合结构尾部进一步膨胀, 使相邻水流通道持续收缩, 融合范围进一步向相邻气泡扩展. 120°条件下, 三孔工况中两个泡间通道较为同步闭合并实现整体气相连通, 而四孔工况则表现出明显的分阶段融合特征, 局部融合逐步向相邻气泡扩展, 但300 ms时局部连接位置仍存在融合颈缩. 随着接触角增大, 气相覆盖范围扩大, 壁面压力由离散低压区和分散的泡尾闭合高压区逐步转变为连续低压覆盖区和较集中的泡尾闭合高压区. 该研究可为水下通气航行体的通气孔布置、壁面润湿性设计及多气泡融合调控提供参考.

     

    Abstract: To investigate the effects of wall wettability on bubble coalescence generated by parallel multi-hole ventilation and on the wall-pressure distribution, numerical models with three and four ventilation holes were established using the volume-of-fluid method. The hole diameter, hole spacing, ventilation rate per hole, and incoming-flow conditions were kept identical for all cases. Bubble morphology, streamwise momentum density, cross-sectional velocity vectors, and wall-pressure distributions were analyzed to investigate bubble coalescence characteristics at different wall contact angles. The results show that, at relatively small contact angles, the bubbles mainly develop independently in the streamwise direction, with limited circumferential spreading, while the liquid passages between adjacent bubbles remain open. As the contact angle increases, circumferential bubble spreading is enhanced, the spacing between adjacent bubbles decreases, and the inter-bubble liquid passages gradually narrow and close. At 90°, only one liquid passage closes in the three-hole case, resulting in local coalescence. In the four-hole case, the two central bubbles coalesce first. Under the constraint imposed by the adjacent bubbles and inter-bubble liquid passages on both sides, the tail of the coalesced structure expands further, causing the neighboring liquid passages to continuously narrow and the coalescence region to extend toward adjacent bubbles. At 120°, the two inter-bubble liquid passages in the three-hole case close relatively synchronously, leading to overall gas-phase connectivity, whereas the four-hole case exhibits a distinct staged coalescence process. Local coalescence gradually extends toward adjacent bubbles; however, at 300 ms, a local coalescence neck still remains at the connection region. As the contact angle increases, the gas-phase coverage expands, and the wall-pressure distribution gradually changes from discrete low-pressure regions and dispersed high-pressure regions associated with bubble-tail closure to a continuous low-pressure coverage region and a more concentrated high-pressure region near the bubble-tail closure. The findings can provide guidance for ventilation-hole arrangement, wall wettability design, and multi-bubble coalescence control in ventilated underwater vehicles.

     

/

返回文章
返回