EI、Scopus 收录
中文核心期刊

多体系统中的冗余约束

Study on redundant constraints in multibody systems

  • 摘要: 冗余约束主要起因于系统奇异构型以及切断铰约束方程的自动生成, 它的存在对多体系统建模和求解都提出了更高的要求. 为了使系统运动方程可解, 需要从系统约束中分离出一组独立约束, 不同的独立约束组往往造成数值分析结果的不同, 但本文严格证明了理论上它们是一致的. 冗余约束在很大程度上加大了系统奇异构型附近违约量控制的难度. 针对这一困难, 本文提出了一种将约束稳定化和违约修正相结合的方法, 数值算例证明了方法的有效性. 鉴于物体的受力分析是实际工程的迫切需要也是多体系统动力学核心任务之一, 本文研究了冗余约束对约束反力的影响, 给出了判别铰约束反力是否唯一的实用准则, 针对两个铰连接同一对物体而引起的冗余约束, 提出了铰合成原理及其求解各自铰内接触力的方法, 并通过数值算例说明了方法的可行性.

     

    Abstract: Being resulted from singular configuration and cut jointconstraint equations generated in a programmed way, redundant constraints inmultibody systems exert great influence on the methods for modeling andsolving multibody systems. It is necessary to select a group of independentequations from whole constraint equations in order to keep the systemcontrol equation solvable. It is observed that results of numerical analysisusually being changed by different choices. However it is not true intheory, as proven rigorously in this paper. Due to constraints violation,many methods for solving DAE lose their effectiveness near by the positioncorresponding to the singular configuration of multibody systems. Based onthe combination of constraints stabilization and elimination of constraintviolation, we present a method to overcome such difficulties and testify itsvalidness by an example. It is the greatest negative effect brought byredundant constraints that forces of interaction between bodies may be notunique. A criterion to certify which and when a constraint force would bedefinite is given. It is known that when a pair of bodies is linked by morethan one joint, the reaction forces in those joints would be ambiguous. Thispaper present a method of making the reaction forces definite in such caseby replacing those joints with a single composed one.

     

/

返回文章
返回