EI、Scopus 收录
中文核心期刊

高速铁路隧道缓冲结构气动载荷与结构应力特性分析

AERODYNAMIC LOAD AND STRUCTURE STRESS ANALYSIS ON HOOD OF HIGH-SPEED RAILWAY TUNNEL

  • 摘要: 高速列车通过隧道时,会引起车隧气动效应.在隧道洞口设置缓冲结构是简便有效的应对措施之一.而缓冲结构一般设置在隧道洞口,列车通过隧道产生气动载荷对该结构的影响也不容忽视.本文采用数值方法,利用Ansys软件的workbench模拟平台,对列车通过隧道产生的气动载荷作用在顶部单开口缓冲结构上的压应力变化进行模拟.研究结果表明:气动载荷所引起的结构附加应力作用明显.当行车速度为350 km/h时,附加应力可以达到80 kPa,而缓冲结构开口周围成为气动载荷附加应力集中区.对于双线隧道,近车壁面与远车壁面的附加压应力规律一致,但近车侧应力值要大于远车侧.与压力波在隧道内的传播特性类似,气动载荷所引起的附加压应力具有往复传播特征.另外,对顶部缓冲结构开口附近出现附加应力集中的原因进行了分析,确定缓冲结构形式是引起应力集中的决定因素.以上结论对隧道洞口缓冲结构的设计及安全巡查具有一定的指导意义.

     

    Abstract: When high speed train passes through tunnel, aerodynamic effect will be induced.Setting hood at tunnel entrance is one of the convenient and effective measures for controlling aerodynamic effect.While the hood usually lay at tunnel entrance, in a long run, the aerodynamic load on the structure also should not be overlooked.In this paper, using Ansys-workbench simulation platform, the fluid structure coupling character induced by aerodynamic load on single top opening hood was analyzed.The research results showed that the extra-pressure stress induced by aerodynamic load was notable.To the train of running speed 350 km/h, the induced extra pressure stress on hood structure can reach 80 kPa.On the tunnel hood, the region around the openings appeared a relative high extra pressure stress.Since the tunnel is used for double railway line, the variation law of extra pressure stress on the tunnel hood inertial side wall of close to and far from train is almost same, while the stress pressure on inertial side wall of close to train is a little larger than that on the other side.Like the compression wave transportation in tunnel, the extra pressure stress induced by aerodynamic load also shows reciprocating transmission characteristics.The reason of stress concentration around the hood openings was deduced and showed that hood structure condition is the intrinsic fact for resulting in the detrimental effect.These conclusions on aerodynamic load are advisable for tunnel hood design and safety checking.

     

/

返回文章
返回