EI、Scopus 收录
中文核心期刊

超低轨飞行器在大气作用下的动力学模型及验证

VERY-LOW ORBIT SPACECRAFT DYNAMICS MODEL AND VALIDATION UNDER ATMOSPHERIC EFFECTS

  • 摘要: 超低轨空间飞行器在轨飞行受到显著且时空波动强的大气阻力作用, 其阻力大小与飞行器构型、材料和大气环境密切相关. 大气阻力与飞行器所处时间和空间位置下的大气参数(包括密度、温度、组分等)相关, 直接受到飞行器轨道运动影响. 同时大气阻力还与飞行器自身特性(表面材料、构型)相关, 受到姿态运动影响. 由于上述多个参数无法通过简化模型准确给出, 因此通过简单模型(如USSA-76大气模型等)对飞行器大气阻力的计算往往存在较大误差. 本研究使用了更为精确的NRLMSIS-2.0大气模型、分子动力学模型并结合轨道姿态动力学对超低轨飞行器受到的大气阻力进行了建模与仿真计算, 分析了材料壁面适应系数对气动阻力产生的重要影响. 为确定超低轨飞行任务窗口, 本文还分析了大气阻力与环境参数的相关性, 结果表明其随太阳活动F10.7、年积日DoY的波动分别达37%、15%, 而随地磁活动Ap和轨道升交点RAAN的变化分别低于5%和0.15%. 使用已有VLEO飞行任务的轨道和飞行器构型数据(天行1号、乾坤1号上面级), 结合大气模型对阻力计算模型中的壁面适应系数进行了拟合分析, 结果与飞行器实际表面材料特性相符.

     

    Abstract: Very-low Earth orbit (VLEO) spacecraft experience significant atmospheric drag with strong temporal and spatial fluctuations during orbital flight, and the magnitude of the drag is closely related to the spacecraft's configuration, materials, and atmospheric environment. Atmospheric drag is associated with the atmospheric parameters at the spacecraft's location and orbit time, including density, temperature, and composition, and is directly influenced by orbital motion. At the same time, it is also related to the spacecraft's characteristics, such as surface materials and configuration, and is affected by attitude motion. Due to the difficulty in accurately providing multiple parameters through simplified models, the simulation calculation of atmospheric drag through these models (such as USSA-76 atmosphere model) on spacecraft models often has considerable errors. This study used the more precise NRLMSIS-2.0 atmospheric model and molecular dynamics model to simulate the atmospheric drag on VLEO spacecraft considering orbital and attitude dynamics, and analyzed the significant impact of the wall adaptation coefficient of materials on aerodynamic drag. To determine the mission window for VLEO flight, the correlation between atmospheric drag and environmental parameters was analyzed. The results showed that the drag fluctuated by 37% and 15% with F10.7 and day of year (DoY), respectively, while the changes with Ap and the right ascension of the ascending node (RAAN) of the orbit were less than 5% and 0.15%, respectively. Using the orbital and spacecraft configuration data from existing VLEO missions (Tianxing-1 and Qiankun-1 upper stage), the wall adaptation coefficient in the drag calculation model was fitted and analyzed in combination with the atmospheric model. The results were consistent with the actual surface material characteristics of the spacecraft.

     

/

返回文章
返回