基于高温气体效应的磁流体流动控制研究进展1)
罗凯, 汪球, 李逸翔, 李进平, 赵伟

RESEARCH PROGRESS ON MAGNETOHYDRODYNAMIC FLOW CONTROL UNDER TEST CONDITIONS WITH HIGH TEMPERATURE REAL GAS EFFECT1)
Luo Kai, Wang Qiu, Li Yixiang, Li Jinping, Zhao Wei
图10 2009, Gülhan等[36]在L2K电弧风洞中开展的磁流体流动控制实验结果, 平头模型, 电磁铁强度可调: (a)无磁场红外图像; (b)有磁场红外图像; (c)温度与热流结果
Fig.10 MHD experimental results in the L2K arc-heat facility by Gülhan in 2009[36]. The model has cylindrical geometry with a flat front surface. And the applied magnetic-induction field was produced by a direct electric current circulating in a coil and could be varied: (a) IR image without magnet; (b) IR image with magnet; (c) the measured surface temperature and heat-flux rate