表面粗糙度对TC4钛合金柱壳剪切带形成的影响1)
EFFECT OF SURFACE ROUGHNESS ON THE FORMATION OF SHEAR BAND IN Ti-6Al-4V ALLOY CYLINDRICAL SHELL1)
表面粗糙度对TC4钛合金柱壳剪切带形成的影响1) |
| 杨涛, 刘龙飞, 杨智程, 胡力, 卢立伟, 石献坤 |
|
EFFECT OF SURFACE ROUGHNESS ON THE FORMATION OF SHEAR BAND IN Ti-6Al-4V ALLOY CYLINDRICAL SHELL1) |
| Yang Tao, Liu Longfei, Yang Zhicheng, Hu Li, Lu Liwei, Shi Xiankun |
| 图3 TC4钛合金圆管表面粗糙度($R_{a}$)形貌: (a) 0.92$\mu $m; (b) 1.83$\mu $m; (c) 2.96$\mu $m; (d) 3.90$\mu $m; (e) 5.04$\mu $m |
| Fig. 3 Surface roughness ($R_{a}$) morphology of Ti-6Al-4V alloy cylindrical shells: (a) 0.92$\mu $m; (b) 1.83$\mu $m; (c) 2.96$\mu $m; (d) 3.90$\mu $m; (e) 5.04$\mu $m |
|
|