REVIEW OF THE THIRD NATIONAL SYMPOSIUM ON EXPLOSION AND IMPACT DYNAMICS FOR YOUNG SCHOLARS

Gao Guangfa; Lei Tiangang; Dai Lanhong

doi:10.6052/0459-1879-20-150

Volume 52 Issue 4

Aug. 2020

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of Theoretical and Applied Mechanics > 2020 > 52(4): 1211-1219. > DOI: 10.6052/0459-1879-20-150 CSTR: 32045.14.0459-1879-20-150

Gao Guangfa, Lei Tiangang, Dai Lanhong. REVIEW OF THE THIRD NATIONAL SYMPOSIUM ON EXPLOSION AND IMPACT DYNAMICS FOR YOUNG SCHOLARS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(4): 1211-1219. DOI: 10.6052/0459-1879-20-150

Citation:

PDF (210 KB)

REVIEW OF THE THIRD NATIONAL SYMPOSIUM ON EXPLOSION AND IMPACT DYNAMICS FOR YOUNG SCHOLARS

^*School of Mechanical Engineering,Nanjing University of Science and Technology, Nanjing 210094,China
^†Department of Mathematical and Physical Sciences,National Natural Science Foundation of China, Beijing 100085,China
^**State Key Laboratory of Nonlinear Mechanics,Institute of Mechanics, Chinese Academy of Sciences,Beijing 100190,China

Received Date: May 05, 2020

Graphical Abstract

Abstract

Abstract

The Third National Symposium on Explosion and Impact Dynamics for Young Scholars was briefly introduced and all of the scientific reports presented at this symposium were reviewed. The scientific reports include four invited talks, nineteen thematic invitations and seventeen topic invitations, which were divided into five research topics, i.e. Detonation and Explosion Dynamics, Structural Dynamics and Multi-scale High Performance Computing, Material Dynamics and Experimental Testing Techniques, Dynamic Mechanical Behavior of Composite Structures, and Energy Absorption Characteristics and Optimization Design of Lightweight Structures. The symposium provides an excellent platform for the young scholars in the Explosion Mechanics and Impact Dynamics to conduct academic exchanges, establish academic friendship and enhance academic cooperation, and it also plays an active role in the construction and development of the discipline.
- explosion and impact dynamics,
- young scholars,
- symposium

FullText(HTML)

References (1)

References

[1]	刘彦, 王成, 詹世革等. 首届全国爆炸与冲击动力学青年学者学术研讨会报告综述. 力学学报, 2016,48(4):1013-1018
[1]	( Liu Yan, Wang Cheng, Zhan Shige, et al. Review of the First National Symposium on Explosion and Shock Dynamics for Young Scholars. Chinese Journal of Theoretical and Applied Mechanics, 2016,48(4):1013-1018 (in Chinese))
[2]	郑志军, 詹世革, 戴兰宏. 第二届全国爆炸与冲击动力学青年学者学术研讨会报告综述. 力学学报, 2018,50(1):177-187
[2]	( Zheng Zhijun, Zhan Shige, Dai Lanhong. Review of the Second National Symposium on Explosion and Impact Dynamics for Young Scholars. Chinese Journal of Theoretical and Applied Mechanics, 2018,50(1):177-187 (in Chinese))
[3]	芮筱亭, 戎保. 多体系统传递矩阵法研究进展. 力学进展, 2012,42(1):4-17
[3]	( Rui Xiaoting, Rong Bao. Advances in transfer matrix method for multibody system dynamics. Advances in Mechanics, 2012,42(1):4-17 (in Chinese))
[4]	芮筱亭, 贠来峰, 沙南生等. 发射装药发射安全性评定技术的研究进展. 兵工学报, 2005,26(5):690-696
[4]	( Rui Xiaoting, Yun Laifeng, Sha Nansheng, et al. Advance on launch safety for gun propellant charge. Acta Armamentarii, 2005,26(5):690-696 (in Chinese))
[5]	徐斌, 王成, 臧立伟等. 爆炸冲击波与防弹衣相互作用的数值模拟. 北京理工大学学报, 2019,39(2):131-134
[5]	( Xu Bin, Wang Cheng, Zang Liwei, et al. Numerical simulation on the impact of explosion shock wave on bullet-proof vest. Transactions of Beijing Institute of Technology, 2019,39(2):131-134(in Chinese))
[6]	王成, 邓涛, 徐文龙. 铝药型罩环形聚能射流的数值模拟. 北京理工大学学报, 2019,39(12):1211-1218
[6]	( Wang Cheng, Deng Tao, Xu Wenlong. Numerical simulation of annular shaped charge with al liner. Transactions of Beijing Institute of Technology, 2019,39(12):1211-1218 (in Chinese))
[7]	Meng LY, Wang C, Yao XH. Non-convex shape effects on the dense random packing properties of assembled rods. Physica A: Statistical Mechanics and its Applications, 2018,490:212-221
[8]	Ou ZC, Yao XH, Zhang XQ. Dynamic Stability of a thin film bonded to a compliant substrate subjected to a step load with damping. International Journal of Nonlinear Sciences & Numerical Simulation, 2018,18(3-4):221-232
[9]	王桂吉, 邓向阳, 谭福利等. 爆炸箔起爆器小尺寸飞片速度测试. 爆炸与冲击, 2008,28(1):28-31
[9]	( Wang Guiji, Deng Xiangyang, Tan Fuli, et al. Velocity measurement of the small size flyer of an exploding foil initiator. Explosion And Shock Waves, 2008,28(1):28-31 (in Chinese))
[10]	王桂吉, 赵同虎, 莫建军等. 一种以TATB/HMX为基炸药的到爆轰距离. 爆炸与冲击, 2006,26(6):510-515
[10]	( Wang Guiji, Zhao Tonghu, Mo Jianjun, et al. Run distance to detonation in a TATB/HMX-based explosive. Explosion And Shock Waves, 2006,26(6):510-515 (in Chinese))
[11]	Hu JB, Vanacore GM, Andrea C, et al. Rippling ultrafast dynamics of suspended 2D monolayers, grapheme//Proceedings of the National Academy of Ences, 2016,113(43):E6555-E6561
[12]	Vanacore G, Hu JB, Liang WX, et al. Ultrafast atomic-scale visualization of acoustic phonons generated by optically excited quantum dots. Structural Dynamics, 2017,4(4):044034
[13]	Guo YZ, Ruan QC, Zhu SX, et al. Temperature rise associated with adiabatic shear band: Causality clarified. Physical Review Letters, 2019,122:015503
[14]	Zhu SX, Guo YZ, Ruan QC, et al. Formation of adiabatic shear band within Ti-6Al-4V: An in-situ study with high-speed photography and temperature measurement. International Journal of Mechanical Sciences, 2019,171:105401
[15]	Chen L, Hu Y, Ren HQ, et al. Performances of the RC column under close-in explosion induced by the double-end-initiation explosive cylinder. International Journal of Impact Engineering, 2019, 132: 103326 (26 Pages)
[16]	Chen L, Fang Q, Jiang XQ, et al. Combined effects of high temperature and high strain rate on normal weight concrete. International Journal of Impact Engineering, 2015,86:40-56
[17]	Li X, Liu ZL, Cui SQ, et al. Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning. Computer Methods in Applied Mechanics and Engineering, 2019,347, 735-753
[18]	Zeng QL, Liu ZL, Xu DD, et al. Modeling arbitrary crack propagation in coupled shell/solid structures with X-FEM. International Journal for Numerical Methods in Engineering, 2016,106(12):1018-1040
[19]	Zhong RC, Fu MH, Chen X, et al. A novel three-dimensional mechanical metamaterial with compression-torsion properties. Composite Structures, 2019,226:1-6
[20]	Zhong RC, Fu MH, QY , et al. Special characteristics of tetrachiral honeycombs under large deformation. International Journal of Solids and Structures, 2019,169:166-176
[21]	Zhao ZQ, Dang HY, Zhang C, et al. A multi-scale modeling framework for impact damage simulation of triaxially braided composites. Composites Part A, 2018,110:113-125
[22]	Liu HF, Meng XH, Zhang HW, et al. The dynamic crack propagation behavior of mode I interlaminar crack in unidirectional carbon/epoxy composites. Engineering Fracture Mechanics, 2019,215:65-23
[23]	Jing L, Liu K, Ren M. The transient response of car body and side windows for high-speed trains passing by each other in a tunnel. Composites Part B, 2019,166:284-297
[24]	Jing L, Han LL. Further study on the wheel-rail impact response induced by a single wheel flat: the coupling effect of strain rate and thermal stress. Vehicle System Dynamics, 2017,55(12):1946-1972
[25]	Miao FX, Sun GJ, Zhu PP. Developed reverberation-ray matrix analysis on transient responses of laminated composite frame based on the first-order shear deformation theory. Composite Structures, 2016,143:255-271
[26]	Miao FX, Sun GJ, Chen KF, et al. Reverberation-ray matrix analysis of the transient dynamic responses of asymmetrically laminated composite beams based on the first-order shear deformation theory. Composite Structures, 2015,119:394-411
[27]	Jiang C, Zhang L, Sun CG, et al. Response to Comment on "Synthesis and characterization of the pentazolate anion cyclo-N5- in (N5)6(H3O)3(NH4)4Cl". Science, 2018,359
[28]	Ma XM, Li X, Li SQ, et al. Blast response of gradient honeycomb sandwich panels with basalt fiber metal laminates as skins. International Journal of Impact Engineering, 2019,123:126-139
[29]	Li JB, Li WB, Wang XM, et al. Mechanical properties and constitutive model of aluminum powder/rubber matrix composites compressed at various strain rates. International Journal of Impact Engineering, 2018,121:55-62
[30]	Fan JT, Wang C. Dynamic compressive response of a developed polymer composite at different strain rates. Composites Part B, 2018,152:96-101
[31]	Liang HL, Luo N, Li XJ, et al. Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method. Journal of Manufacturing Processes, 2019,45:115-122
[32]	Chen R, Yao W, Lu FY. et al. Evaluation of the stress equilibrium condition in axially constrained triaxial SHPB tests. Experimental Mechanics, 2017,58(11):1-5
[33]	Wang LQ, Ma HH, Shen ZW, et al. Detonation behaviors of syngas-oxygen in round and square tubes. International Journal of Hydrogen Energy, 2018,43(31):14775-14786
[34]	Zhou GA, Ma HH, Shen ZW, et al. Study on a new cleaner emulsion explosive containing common clay. Propellants Explosives Pyrotechnics, 2018,43(8):789-798
[35]	Wu H, Fang Q, Peng YL, et al. Hard projectile perforation on the monolithic and segmented RC panels with a rear steel liner. International Journal of Impact Engineering, 2015,76:232-250
[36]	Wu H, Fang Q, Gong ZM, et al. Hard projectile impact on layered SFRHSC composite target. International Journal of Impact Engineering, 2015,84:88-95
[37]	Dong Q, Li QM, Zheng JY, et al. Strain growth in a finite-length cylindrical shell under internal pressure pulse. Journal of Pressure Vessel Technology, 2017,139(2):1-8
[38]	Dong Q, Li QM, Zheng JY. Interactive mechanisms between the internal blast loading and the dynamic elastic response of spherical containment vessels. International Journal of Impact Engineering, 2010,31(4):349-358
[39]	Li G, Song CM, Wang MY. Evolution of penetration mechanism induced by strain rate effect. The European Physical Journal Conferences, 2018,183(4):01063
[40]	Gao GF, Qi MJ, Li YC. Random equilateral Kelvin open-cell foam microstructures: Cross-section shapes, compressive behavior, and isotropic characteristics. Journal of Cellular Plastics, 2018,54(1):53-72
[41]	Gao GF, Li YC, Chen Y. Dynamic response for porous epoxy resin matrix composites filled with iron powder at different strain rates and constitutive relationships. Mechanics of Composite Materials & Structures, 2016,23:811-868
[42]	Chen Y, Dai LH. Nature of crack-tip plastic zone in metallic glasses. International Journal of Plasticity, 2016,77:54-74
[43]	Zhang B, Liu H. The effects of large scale perturbation-generating obstacles on the propagation of detonation filled with methane-oxygen mixture. Combustion & Flame, 2017,182:279-287
[44]	Liu JG, Hou B, Lu FY, et al. A theoretical study of shock front propagation in the density graded cellular rods. International Journal of Impact Engineering, 2015,80(C):133-142
[45]	Zhang JX, Zhou RF, Wang MS, et al. Dynamic response of double-layer rectangular sandwich plates with metal foam cores subjected to blast loading. International Journal of Impact Engineering, 2018,122:265-275
[46]	Liu SS, Xu C, Wen YK, et al. Rifle bullet penetration into ballistic gelatin. Journal of the Mechanical Behavior of Biomedical Materials, 2017,67:40-50
[47]	Li SQ, Yu BL, Dora K, et al. Experimental, numerical, and theoretical studies of the response of short cylindrical stainless steel tubes under lateral air blast loading. International Journal of Impact Engineering, 2019,124:48-60
[48]	Wu QQ, Ashkan V, Mohamad EA, et al. Lattice materials with pyramidal hierarchy: systematic analysis and three dimensional failure mechanism Maps. Journal of the Mechanics and Physics of Solids, 2019,125:112-144
[49]	Liu BH, Jia YK, Yuan CH, et al. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review. Energy Storage Materials, 2020,24:85-112
[50]	Song ZH, Le J, Whisler D, et al. Skin-stringer interface failure investigation of stringer-stiffened curved composite panels under hail ice impact. International Journal of Impact Engineering, 2018,122:439-450
[51]	Liu JF, Chen WS, Hao H, et al. Numerical study of low-speed impact response of sandwich panel with tube filled honeycomb core. Composite Structures, 2019,220:736-748
[52]	Ye TK, Xu YX, Ren J. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite. Materials Science & Engineering A, 2019,753:146-155
[53]	Li Y, Chen ZH, Zhao T, et al. An experimental study on dynamic response of polyurea coated metal plates under intense underwater impulsive loading. International Journal of Impact Engineering, 2019(133):103361
[54]	Xiang MZ, Liao Y, Wang K, et al. Shock-induced plasticity in semi-coherent {111} Cu-Ni multilayers. International Journal of Plasticty, 2018,103:23-38

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (1991) PDF downloads (342)

REVIEW OF THE THIRD NATIONAL SYMPOSIUM ON EXPLOSION AND IMPACT DYNAMICS FOR YOUNG SCHOLARS

Abstract

References

Catalog

Article Metrics

Related

Download Center

Author Center

REVIEW OF THE THIRD NATIONAL SYMPOSIUM ON EXPLOSION AND IMPACT DYNAMICS FOR YOUNG SCHOLARS

Abstract

References

Catalog

Article Metrics

Related

Download Center

Author Center

Export File

Citation

Format

Content