| Citation: |
A theoretical and experimental study on the quasi-static constitutive model of aluminum foams[J]. Chinese Journal of Theoretical and Applied Mechanics, 2004, 36(6): 673-679. DOI: 10.6052/0459-1879-2004-6-2004-157
|
| [1] | Jia Ran, Zhao Guiping. POISSON’S RATIO AND TRIAXIAL COMPRESSION DEFORMATION PATTERN OF CLOSED-CELL ALUMINUM FOAM[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(8): 2289-2297. DOI: 10.6052/0459-1879-21-173 |
| [2] | Jia Ran, Zhao Guiping. PROGRESS IN CONSTITUTIVE BEHAVIOR OF ALUMINUM FOAM[J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(3): 603-622. DOI: 10.6052/0459-1879-20-020 |
| [3] | Wan Zheng, Yao Yangping, Meng Da. AN ELASTOPLASTIC CONSTITUTIVE MODEL OF CONCRETE UNDER COMPLICATED LOAD[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016, 48(5): 1159-1171. DOI: 10.6052/0459-1879-15-389 |
| [4] | Zhang Jian, Zhao Guipingy, Lu Tianjian. MULTIAXIAL PHENOMENOLOGICAL COMPRESSIBLE CONSTITUTIVE PARAMETERS FOR CLOSED-CELL ALUMINUM FOAMS[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(4): 651-663. DOI: 10.6052/0459-1879-15-086 |
| [5] | Li Binchao Zhao Guiping Lu Tianjian. Low strain rate compressive behavior of high porosity closed-cell aluminum foams[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(1): 122-135. DOI: 10.6052/0459-1879-2011-1-lxxb2009-778 |
| [7] | 基于变形动力学模型的黏弹性材料本构关系[J]. Chinese Journal of Theoretical and Applied Mechanics, 1993, 25(3): 375-379. DOI: 10.6052/0459-1879-1993-3-1995-655 |
| [8] | A 3-D COMPOSITE CONSTITUTIVE MODEL FOR ANALYSIS OF FINITE ELASTO-PLASTIC DEFORMATION[J]. Chinese Journal of Theoretical and Applied Mechanics, 1992, 24(2): 162-170. DOI: 10.6052/0459-1879-1992-2-1995-724 |
| [9] | 一种描述形状记忆合金拟弹性变形行为的本构关系[J]. Chinese Journal of Theoretical and Applied Mechanics, 1991, 23(2): 201-210. DOI: 10.6052/0459-1879-1991-2-1995-827 |
| [10] | A 3-D COMPOSITE CONSTITUTIVE MODEL OF ELASTO-PLASTICiTY FOR POLYCRYSTALLINE MATERIALS[J]. Chinese Journal of Theoretical and Applied Mechanics, 1990, 22(6): 680-688. DOI: 10.6052/0459-1879-1990-6-1995-999 |
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: