EI、Scopus 收录
中文核心期刊
郭俊宏 刘官厅. 带双裂纹的椭圆孔口问题的应力分析[J]. 力学学报, 2007, 23(5): 699-703. DOI: 10.6052/0459-1879-2007-5-2007-017
引用本文: 郭俊宏 刘官厅. 带双裂纹的椭圆孔口问题的应力分析[J]. 力学学报, 2007, 23(5): 699-703. DOI: 10.6052/0459-1879-2007-5-2007-017
Junhong Guo, Guanting Liu. Stress analysis for an elliptical hole with two straight cracks[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(5): 699-703. DOI: 10.6052/0459-1879-2007-5-2007-017
Citation: Junhong Guo, Guanting Liu. Stress analysis for an elliptical hole with two straight cracks[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(5): 699-703. DOI: 10.6052/0459-1879-2007-5-2007-017

带双裂纹的椭圆孔口问题的应力分析

Stress analysis for an elliptical hole with two straight cracks

  • 摘要: 利用复变方法,通过构造新的保角映射,研究了带双裂纹椭圆孔口的平面弹性问 题,得到了I型与II型裂纹问题应力强度因子的解析解.在极限情形下, 不仅可以还原经典的Griffith裂纹的结果,而且可模拟出十字裂纹和带双裂纹的圆 形孔口问题.

     

    Abstract: Using the complex variable function method and the technique of conformalmapping which transforms the complicated region in physical planeonto the interior of the unit circle in \zeta plane, then based on Cauchy integral theory, the plane elasticity problem of anelliptical hole with two straight cracks is solved, and the analyticsolutions of the stress intensity factors for mode Iand mode II problems are obtained. Under the limiting conditions, the present results are reduced tothe results of the well-known Griffith cracks. Moreover, they include the cross crack and the circular hole withtwo straight cracks. Analytic solutions obtained in thispaper are useful in materials science and engineering.

     

/

返回文章
返回