EI、Scopus 收录
中文核心期刊
程小全 邹健 许延敏 张纪奎 李松年. 含孔平面编织混杂铺层层合板压缩破坏仿真[J]. 力学学报, 2007, 23(6): 829-834. DOI: 10.6052/0459-1879-2007-6-2007-043
引用本文: 程小全 邹健 许延敏 张纪奎 李松年. 含孔平面编织混杂铺层层合板压缩破坏仿真[J]. 力学学报, 2007, 23(6): 829-834. DOI: 10.6052/0459-1879-2007-6-2007-043
Xiaoquan Cheng, Jian Zou, Yanmin Xu, Jikui Zhang, Songnian Li. Simulation of compressive failure of hybrid plain woven fabric laminate with a hole[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(6): 829-834. DOI: 10.6052/0459-1879-2007-6-2007-043
Citation: Xiaoquan Cheng, Jian Zou, Yanmin Xu, Jikui Zhang, Songnian Li. Simulation of compressive failure of hybrid plain woven fabric laminate with a hole[J]. Chinese Journal of Theoretical and Applied Mechanics, 2007, 23(6): 829-834. DOI: 10.6052/0459-1879-2007-6-2007-043

含孔平面编织混杂铺层层合板压缩破坏仿真

Simulation of compressive failure of hybrid plain woven fabric laminate with a hole

  • 摘要: 对ANSYS软件平台进行了二次开发,建立了平面编织混杂铺层层合板损伤累积有限元模型,对含孔平面编织混杂铺层层合板的压缩破坏行为进行了仿真计算. 研究结果表明,所建模型能够较好地仿真含孔平面编织层合板的损伤破坏过程,并能准确预测层合板的损伤类型、损伤扩展以及破坏强度;同时提出并验证了适合该类型层合板的损伤判据和衰减准则. 该模型所给结果形象直观,适合工程应用.

     

    Abstract: An damage developing finite element model of hybrid plainwoven composite laminates was established by secondary development on ANSYSsoftware with ANSYS parameter design language. The simulation of compressivebehavior of hybrid plain woven composites laminates with a hole was carriedon. It can be found from the results that this model can be used to simulatethe whole damage and failure course of hybrid plain woven compositeslaminates with a hole and to predict laminate damage styles, damagedevelopment and compressive strength accurately. Meanwhile, damage criteriaand stiffness attenuation rules fit for this type of laminates were putforward and proved. The results by this model are visual and intuitionistic,so this model is fit for engineering application.

     

/

返回文章
返回